samples: pktgen: make variable consistent with option

This commit changes variable names that can cause confusion.

For example, variable DST_MIN is quite confusing since the
keyword 'udp_dst_min' and keyword 'dst_min' is used with pg_ctrl.

On the following commit, 'dst_min' will be used to set destination IP,
and the existing variable name DST_MIN should be changed.

Variable names are matched to the exact keyword used with pg_ctrl.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh

@@ -42,8 +42,8 @@ fi
 [ -z "$BURST" ] && BURST=1024
 [ -z "$COUNT" ] && COUNT="10000000" # Zero means indefinitely
 if [ -n "$DST_PORT" ]; then
-    read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
-    validate_ports $DST_MIN $DST_MAX
+    read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
 # Base Config
@@ -76,8 +76,8 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     if [ -n "$DST_PORT" ]; then
 	# Single destination port or random port range
 	pg_set $dev "flag UDPDST_RND"
-	pg_set $dev "udp_dst_min $DST_MIN"
-	pg_set $dev "udp_dst_max $DST_MAX"
+	pg_set $dev "udp_dst_min $UDP_DST_MIN"
+	pg_set $dev "udp_dst_max $UDP_DST_MAX"
     fi
 
     # Inject packet into RX path of stack

samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh

@@ -25,8 +25,8 @@ if [[ -n "$BURST" ]]; then
 fi
 [ -z "$COUNT" ] && COUNT="10000000" # Zero means indefinitely
 if [ -n "$DST_PORT" ]; then
-    read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
-    validate_ports $DST_MIN $DST_MAX
+    read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
 # Base Config
@@ -59,8 +59,8 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     if [ -n "$DST_PORT" ]; then
 	# Single destination port or random port range
 	pg_set $dev "flag UDPDST_RND"
-	pg_set $dev "udp_dst_min $DST_MIN"
-	pg_set $dev "udp_dst_max $DST_MAX"
+	pg_set $dev "udp_dst_min $UDP_DST_MIN"
+	pg_set $dev "udp_dst_max $UDP_DST_MAX"
     fi
 
     # Inject packet into TX qdisc egress path of stack

samples/pktgen/pktgen_sample01_simple.sh

@@ -23,16 +23,16 @@ fi
 [ -z "$DST_MAC" ] && usage && err 2 "Must specify -m dst_mac"
 [ -z "$COUNT" ]   && COUNT="100000" # Zero means indefinitely
 if [ -n "$DST_PORT" ]; then
-    read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
-    validate_ports $DST_MIN $DST_MAX
+    read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
 # Base Config
 DELAY="0"        # Zero means max speed
 
 # Flow variation random source port between min and max
-UDP_MIN=9
-UDP_MAX=109
+UDP_SRC_MIN=9
+UDP_SRC_MAX=109
 
 # General cleanup everything since last run
 # (especially important if other threads were configured by other scripts)
@@ -66,14 +66,14 @@ pg_set $DEV "dst$IP6 $DEST_IP"
 if [ -n "$DST_PORT" ]; then
     # Single destination port or random port range
     pg_set $DEV "flag UDPDST_RND"
-    pg_set $DEV "udp_dst_min $DST_MIN"
-    pg_set $DEV "udp_dst_max $DST_MAX"
+    pg_set $DEV "udp_dst_min $UDP_DST_MIN"
+    pg_set $DEV "udp_dst_max $UDP_DST_MAX"
 fi
 
 # Setup random UDP port src range
 pg_set $DEV "flag UDPSRC_RND"
-pg_set $DEV "udp_src_min $UDP_MIN"
-pg_set $DEV "udp_src_max $UDP_MAX"
+pg_set $DEV "udp_src_min $UDP_SRC_MIN"
+pg_set $DEV "udp_src_max $UDP_SRC_MAX"
 
 # start_run
 echo "Running... ctrl^C to stop" >&2

samples/pktgen/pktgen_sample02_multiqueue.sh

@@ -21,8 +21,8 @@ DELAY="0"        # Zero means max speed
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 
 # Flow variation random source port between min and max
-UDP_MIN=9
-UDP_MAX=109
+UDP_SRC_MIN=9
+UDP_SRC_MAX=109
 
 # (example of setting default params in your script)
 if [ -z "$DEST_IP" ]; then
@@ -30,8 +30,8 @@ if [ -z "$DEST_IP" ]; then
 fi
 [ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
 if [ -n "$DST_PORT" ]; then
-    read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
-    validate_ports $DST_MIN $DST_MAX
+    read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
 # General cleanup everything since last run
@@ -67,14 +67,14 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     if [ -n "$DST_PORT" ]; then
 	# Single destination port or random port range
 	pg_set $dev "flag UDPDST_RND"
-	pg_set $dev "udp_dst_min $DST_MIN"
-	pg_set $dev "udp_dst_max $DST_MAX"
+	pg_set $dev "udp_dst_min $UDP_DST_MIN"
+	pg_set $dev "udp_dst_max $UDP_DST_MAX"
     fi
 
     # Setup random UDP port src range
     pg_set $dev "flag UDPSRC_RND"
-    pg_set $dev "udp_src_min $UDP_MIN"
-    pg_set $dev "udp_src_max $UDP_MAX"
+    pg_set $dev "udp_src_min $UDP_SRC_MIN"
+    pg_set $dev "udp_src_max $UDP_SRC_MAX"
 done
 
 # start_run

samples/pktgen/pktgen_sample03_burst_single_flow.sh

@@ -34,8 +34,8 @@ fi
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0" # No need for clones when bursting
 [ -z "$COUNT" ]     && COUNT="0" # Zero means indefinitely
 if [ -n "$DST_PORT" ]; then
-    read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
-    validate_ports $DST_MIN $DST_MAX
+    read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
 # Base Config
@@ -67,8 +67,8 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     if [ -n "$DST_PORT" ]; then
 	# Single destination port or random port range
 	pg_set $dev "flag UDPDST_RND"
-	pg_set $dev "udp_dst_min $DST_MIN"
-	pg_set $dev "udp_dst_max $DST_MAX"
+	pg_set $dev "udp_dst_min $UDP_DST_MIN"
+	pg_set $dev "udp_dst_max $UDP_DST_MAX"
     fi
 
     # Setup burst, for easy testing -b 0 disable bursting

samples/pktgen/pktgen_sample04_many_flows.sh

@@ -18,8 +18,8 @@ source ${basedir}/parameters.sh
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 [ -z "$COUNT" ]     && COUNT="0" # Zero means indefinitely
 if [ -n "$DST_PORT" ]; then
-    read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
-    validate_ports $DST_MIN $DST_MAX
+    read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
 # NOTICE:  Script specific settings
@@ -63,8 +63,8 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     if [ -n "$DST_PORT" ]; then
 	# Single destination port or random port range
 	pg_set $dev "flag UDPDST_RND"
-	pg_set $dev "udp_dst_min $DST_MIN"
-	pg_set $dev "udp_dst_max $DST_MAX"
+	pg_set $dev "udp_dst_min $UDP_DST_MIN"
+	pg_set $dev "udp_dst_max $UDP_DST_MAX"
     fi
 
     # Randomize source IP-addresses

samples/pktgen/pktgen_sample05_flow_per_thread.sh

@@ -23,8 +23,8 @@ source ${basedir}/parameters.sh
 [ -z "$BURST" ]     && BURST=32
 [ -z "$COUNT" ]     && COUNT="0" # Zero means indefinitely
 if [ -n "$DST_PORT" ]; then
-    read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
-    validate_ports $DST_MIN $DST_MAX
+    read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
 # Base Config
@@ -56,8 +56,8 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     if [ -n "$DST_PORT" ]; then
 	# Single destination port or random port range
 	pg_set $dev "flag UDPDST_RND"
-	pg_set $dev "udp_dst_min $DST_MIN"
-	pg_set $dev "udp_dst_max $DST_MAX"
+	pg_set $dev "udp_dst_min $UDP_DST_MIN"
+	pg_set $dev "udp_dst_max $UDP_DST_MAX"
     fi
 
     # Setup source IP-addresses based on thread number

samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh

@@ -20,8 +20,8 @@ DELAY="0"        # Zero means max speed
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 
 # Flow variation random source port between min and max
-UDP_MIN=9
-UDP_MAX=109
+UDP_SRC_MIN=9
+UDP_SRC_MAX=109
 
 node=`get_iface_node $DEV`
 irq_array=(`get_iface_irqs $DEV`)
@@ -36,8 +36,8 @@ if [ -z "$DEST_IP" ]; then
 fi
 [ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
 if [ -n "$DST_PORT" ]; then
-    read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
-    validate_ports $DST_MIN $DST_MAX
+    read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
 # General cleanup everything since last run
@@ -84,14 +84,14 @@ for ((i = 0; i < $THREADS; i++)); do
     if [ -n "$DST_PORT" ]; then
 	# Single destination port or random port range
 	pg_set $dev "flag UDPDST_RND"
-	pg_set $dev "udp_dst_min $DST_MIN"
-	pg_set $dev "udp_dst_max $DST_MAX"
+	pg_set $dev "udp_dst_min $UDP_DST_MIN"
+	pg_set $dev "udp_dst_max $UDP_DST_MAX"
     fi
 
     # Setup random UDP port src range
     pg_set $dev "flag UDPSRC_RND"
-    pg_set $dev "udp_src_min $UDP_MIN"
-    pg_set $dev "udp_src_max $UDP_MAX"
+    pg_set $dev "udp_src_min $UDP_SRC_MIN"
+    pg_set $dev "udp_src_max $UDP_SRC_MAX"
 done
 
 # start_run