Commit 725757ae authored by Antoine Ténart's avatar Antoine Ténart Committed by David S. Miller

net: mvpp2: enable basic 10G support

On GOP port 0 two MAC modes are available: GMAC and XLG. The XLG MAC is
used for 10G connectivity. This patch adds a basic 10G support by
allowing to use the XLG MAC on port 0 and by reworking the
port_enable/disable functions so that the XLG MAC is configured when
using 10G.
Signed-off-by: default avatarAntoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 88efe190
...@@ -345,9 +345,15 @@ ...@@ -345,9 +345,15 @@
/* Per-port XGMAC registers. PPv2.2 only, only for GOP port 0, /* Per-port XGMAC registers. PPv2.2 only, only for GOP port 0,
* relative to port->base. * relative to port->base.
*/ */
#define MVPP22_XLG_CTRL0_REG 0x100
#define MVPP22_XLG_CTRL0_PORT_EN BIT(0)
#define MVPP22_XLG_CTRL0_MAC_RESET_DIS BIT(1)
#define MVPP22_XLG_CTRL0_MIB_CNT_DIS BIT(14)
#define MVPP22_XLG_CTRL3_REG 0x11c #define MVPP22_XLG_CTRL3_REG 0x11c
#define MVPP22_XLG_CTRL3_MACMODESELECT_MASK (7 << 13) #define MVPP22_XLG_CTRL3_MACMODESELECT_MASK (7 << 13)
#define MVPP22_XLG_CTRL3_MACMODESELECT_GMAC (0 << 13) #define MVPP22_XLG_CTRL3_MACMODESELECT_GMAC (0 << 13)
#define MVPP22_XLG_CTRL3_MACMODESELECT_10G (1 << 13)
/* SMI registers. PPv2.2 only, relative to priv->iface_base. */ /* SMI registers. PPv2.2 only, relative to priv->iface_base. */
#define MVPP22_SMI_MISC_CFG_REG 0x1204 #define MVPP22_SMI_MISC_CFG_REG 0x1204
...@@ -4192,7 +4198,13 @@ static void mvpp22_port_mii_set(struct mvpp2_port *port) ...@@ -4192,7 +4198,13 @@ static void mvpp22_port_mii_set(struct mvpp2_port *port)
if (port->gop_id == 0) { if (port->gop_id == 0) {
val = readl(port->base + MVPP22_XLG_CTRL3_REG); val = readl(port->base + MVPP22_XLG_CTRL3_REG);
val &= ~MVPP22_XLG_CTRL3_MACMODESELECT_MASK; val &= ~MVPP22_XLG_CTRL3_MACMODESELECT_MASK;
val |= MVPP22_XLG_CTRL3_MACMODESELECT_GMAC;
if (port->phy_interface == PHY_INTERFACE_MODE_XAUI ||
port->phy_interface == PHY_INTERFACE_MODE_10GKR)
val |= MVPP22_XLG_CTRL3_MACMODESELECT_10G;
else
val |= MVPP22_XLG_CTRL3_MACMODESELECT_GMAC;
writel(val, port->base + MVPP22_XLG_CTRL3_REG); writel(val, port->base + MVPP22_XLG_CTRL3_REG);
} }
...@@ -4242,19 +4254,40 @@ static void mvpp2_port_enable(struct mvpp2_port *port) ...@@ -4242,19 +4254,40 @@ static void mvpp2_port_enable(struct mvpp2_port *port)
{ {
u32 val; u32 val;
val = readl(port->base + MVPP2_GMAC_CTRL_0_REG); /* Only GOP port 0 has an XLG MAC */
val |= MVPP2_GMAC_PORT_EN_MASK; if (port->gop_id == 0 &&
val |= MVPP2_GMAC_MIB_CNTR_EN_MASK; (port->phy_interface == PHY_INTERFACE_MODE_XAUI ||
writel(val, port->base + MVPP2_GMAC_CTRL_0_REG); port->phy_interface == PHY_INTERFACE_MODE_10GKR)) {
val = readl(port->base + MVPP22_XLG_CTRL0_REG);
val |= MVPP22_XLG_CTRL0_PORT_EN |
MVPP22_XLG_CTRL0_MAC_RESET_DIS;
val &= ~MVPP22_XLG_CTRL0_MIB_CNT_DIS;
writel(val, port->base + MVPP22_XLG_CTRL0_REG);
} else {
val = readl(port->base + MVPP2_GMAC_CTRL_0_REG);
val |= MVPP2_GMAC_PORT_EN_MASK;
val |= MVPP2_GMAC_MIB_CNTR_EN_MASK;
writel(val, port->base + MVPP2_GMAC_CTRL_0_REG);
}
} }
static void mvpp2_port_disable(struct mvpp2_port *port) static void mvpp2_port_disable(struct mvpp2_port *port)
{ {
u32 val; u32 val;
val = readl(port->base + MVPP2_GMAC_CTRL_0_REG); /* Only GOP port 0 has an XLG MAC */
val &= ~(MVPP2_GMAC_PORT_EN_MASK); if (port->gop_id == 0 &&
writel(val, port->base + MVPP2_GMAC_CTRL_0_REG); (port->phy_interface == PHY_INTERFACE_MODE_XAUI ||
port->phy_interface == PHY_INTERFACE_MODE_10GKR)) {
val = readl(port->base + MVPP22_XLG_CTRL0_REG);
val &= ~(MVPP22_XLG_CTRL0_PORT_EN |
MVPP22_XLG_CTRL0_MAC_RESET_DIS);
writel(val, port->base + MVPP22_XLG_CTRL0_REG);
} else {
val = readl(port->base + MVPP2_GMAC_CTRL_0_REG);
val &= ~(MVPP2_GMAC_PORT_EN_MASK);
writel(val, port->base + MVPP2_GMAC_CTRL_0_REG);
}
} }
/* Set IEEE 802.3x Flow Control Xon Packet Transmission Mode */ /* Set IEEE 802.3x Flow Control Xon Packet Transmission Mode */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment