Commit 72d1f234 authored by Jaechul Lee's avatar Jaechul Lee Committed by Dmitry Torokhov

Input: tm2-touchkey - add touchkey driver support for TM2

This patch adds support for the TM2 touch key and led functionality.

The driver interfaces with userspace through an input device and reports
KEY_PHONE and KEY_BACK event types. LED brightness can be controlled by
"/sys/class/leds/tm2-touchkey/brightness".
Signed-off-by: default avatarBeomho Seo <beomho.seo@samsung.com>
Signed-off-by: default avatarJaechul Lee <jcsing.lee@samsung.com>
Reviewed-by: default avatarJavier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: default avatarAndi Shyti <andi.shyti@samsung.com>
Reviewed-by: default avatarChanwoo Choi <cw00.choi@samsung.com>
Tested-by: default avatarChanwoo Choi <cw00.choi@samsung.com>
Acked-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent aa6f9222
Samsung tm2-touchkey
Required properties:
- compatible: must be "cypress,tm2-touchkey"
- reg: I2C address of the chip.
- interrupt-parent: a phandle for the interrupt controller (see interrupt
binding[0]).
- interrupts: interrupt to which the chip is connected (see interrupt
binding[0]).
- vcc-supply : internal regulator output. 1.8V
- vdd-supply : power supply for IC 3.3V
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
Example:
&i2c0 {
/* ... */
touchkey@20 {
compatible = "cypress,tm2-touchkey";
reg = <0x20>;
interrupt-parent = <&gpa3>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
vcc-supply=<&ldo32_reg>;
vdd-supply=<&ldo33_reg>;
};
};
...@@ -666,6 +666,17 @@ config KEYBOARD_TC3589X ...@@ -666,6 +666,17 @@ config KEYBOARD_TC3589X
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called tc3589x-keypad. module will be called tc3589x-keypad.
config KEYBOARD_TM2_TOUCHKEY
tristate "TM2 touchkey support"
depends on I2C
depends on LEDS_CLASS
help
Say Y here to enable device driver for tm2-touchkey with
LED control for the Exynos5433 TM2 board.
To compile this driver as a module, choose M here.
module will be called tm2-touchkey.
config KEYBOARD_TWL4030 config KEYBOARD_TWL4030
tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
depends on TWL4030_CORE depends on TWL4030_CORE
......
...@@ -61,6 +61,7 @@ obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o ...@@ -61,6 +61,7 @@ obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o
obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o
obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o
obj-$(CONFIG_KEYBOARD_TM2_TOUCHKEY) += tm2-touchkey.o
obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o
/*
* TM2 touchkey device driver
*
* Copyright 2005 Phil Blundell
* Copyright 2016 Samsung Electronics Co., Ltd.
*
* Author: Beomho Seo <beomho.seo@samsung.com>
* Author: Jaechul Lee <jcsing.lee@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pm.h>
#include <linux/regulator/consumer.h>
#define TM2_TOUCHKEY_DEV_NAME "tm2-touchkey"
#define TM2_TOUCHKEY_KEYCODE_REG 0x03
#define TM2_TOUCHKEY_BASE_REG 0x00
#define TM2_TOUCHKEY_CMD_LED_ON 0x10
#define TM2_TOUCHKEY_CMD_LED_OFF 0x20
#define TM2_TOUCHKEY_BIT_PRESS_EV BIT(3)
#define TM2_TOUCHKEY_BIT_KEYCODE GENMASK(2, 0)
#define TM2_TOUCHKEY_LED_VOLTAGE_MIN 2500000
#define TM2_TOUCHKEY_LED_VOLTAGE_MAX 3300000
enum {
TM2_TOUCHKEY_KEY_MENU = 0x1,
TM2_TOUCHKEY_KEY_BACK,
};
struct tm2_touchkey_data {
struct i2c_client *client;
struct input_dev *input_dev;
struct led_classdev led_dev;
struct regulator *vdd;
struct regulator_bulk_data regulators[2];
};
static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
enum led_brightness brightness)
{
struct tm2_touchkey_data *touchkey =
container_of(led_dev, struct tm2_touchkey_data, led_dev);
u32 volt;
u8 data;
if (brightness == LED_OFF) {
volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN;
data = TM2_TOUCHKEY_CMD_LED_OFF;
} else {
volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX;
data = TM2_TOUCHKEY_CMD_LED_ON;
}
regulator_set_voltage(touchkey->vdd, volt, volt);
i2c_smbus_write_byte_data(touchkey->client,
TM2_TOUCHKEY_BASE_REG, data);
}
static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey)
{
int error;
error = regulator_bulk_enable(ARRAY_SIZE(touchkey->regulators),
touchkey->regulators);
if (error)
return error;
/* waiting for device initialization, at least 150ms */
msleep(150);
return 0;
}
static void tm2_touchkey_power_disable(void *data)
{
struct tm2_touchkey_data *touchkey = data;
regulator_bulk_disable(ARRAY_SIZE(touchkey->regulators),
touchkey->regulators);
}
static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
{
struct tm2_touchkey_data *touchkey = devid;
int data;
int key;
data = i2c_smbus_read_byte_data(touchkey->client,
TM2_TOUCHKEY_KEYCODE_REG);
if (data < 0) {
dev_err(&touchkey->client->dev,
"failed to read i2c data: %d\n", data);
goto out;
}
switch (data & TM2_TOUCHKEY_BIT_KEYCODE) {
case TM2_TOUCHKEY_KEY_MENU:
key = KEY_PHONE;
break;
case TM2_TOUCHKEY_KEY_BACK:
key = KEY_BACK;
break;
default:
dev_warn(&touchkey->client->dev,
"unhandled keycode, data %#02x\n", data);
goto out;
}
if (data & TM2_TOUCHKEY_BIT_PRESS_EV) {
input_report_key(touchkey->input_dev, KEY_PHONE, 0);
input_report_key(touchkey->input_dev, KEY_BACK, 0);
} else {
input_report_key(touchkey->input_dev, key, 1);
}
input_sync(touchkey->input_dev);
out:
return IRQ_HANDLED;
}
static int tm2_touchkey_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct tm2_touchkey_data *touchkey;
int error;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&client->dev, "incompatible I2C adapter\n");
return -EIO;
}
touchkey = devm_kzalloc(&client->dev, sizeof(*touchkey), GFP_KERNEL);
if (!touchkey)
return -ENOMEM;
touchkey->client = client;
i2c_set_clientdata(client, touchkey);
touchkey->regulators[0].supply = "vcc";
touchkey->regulators[1].supply = "vdd";
error = devm_regulator_bulk_get(&client->dev,
ARRAY_SIZE(touchkey->regulators),
touchkey->regulators);
if (error) {
dev_err(&client->dev, "failed to get regulators: %d\n", error);
return error;
}
/* Save VDD for easy access */
touchkey->vdd = touchkey->regulators[1].consumer;
error = tm2_touchkey_power_enable(touchkey);
if (error) {
dev_err(&client->dev, "failed to power up device: %d\n", error);
return error;
}
error = devm_add_action_or_reset(&client->dev,
tm2_touchkey_power_disable, touchkey);
if (error) {
dev_err(&client->dev,
"failed to install poweroff handler: %d\n", error);
return error;
}
/* input device */
touchkey->input_dev = devm_input_allocate_device(&client->dev);
if (!touchkey->input_dev) {
dev_err(&client->dev, "failed to allocate input device\n");
return -ENOMEM;
}
touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME;
touchkey->input_dev->id.bustype = BUS_I2C;
input_set_capability(touchkey->input_dev, EV_KEY, KEY_PHONE);
input_set_capability(touchkey->input_dev, EV_KEY, KEY_BACK);
input_set_drvdata(touchkey->input_dev, touchkey);
error = input_register_device(touchkey->input_dev);
if (error) {
dev_err(&client->dev,
"failed to register input device: %d\n", error);
return error;
}
error = devm_request_threaded_irq(&client->dev, client->irq,
NULL, tm2_touchkey_irq_handler,
IRQF_ONESHOT,
TM2_TOUCHKEY_DEV_NAME, touchkey);
if (error) {
dev_err(&client->dev,
"failed to request threaded irq: %d\n", error);
return error;
}
/* led device */
touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME;
touchkey->led_dev.brightness = LED_FULL;
touchkey->led_dev.max_brightness = LED_FULL;
touchkey->led_dev.brightness_set = tm2_touchkey_led_brightness_set;
error = devm_led_classdev_register(&client->dev, &touchkey->led_dev);
if (error) {
dev_err(&client->dev,
"failed to register touchkey led: %d\n", error);
return error;
}
return 0;
}
static int __maybe_unused tm2_touchkey_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client);
disable_irq(client->irq);
tm2_touchkey_power_disable(touchkey);
return 0;
}
static int __maybe_unused tm2_touchkey_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client);
int ret;
enable_irq(client->irq);
ret = tm2_touchkey_power_enable(touchkey);
if (ret)
dev_err(dev, "failed to enable power: %d\n", ret);
return ret;
}
static SIMPLE_DEV_PM_OPS(tm2_touchkey_pm_ops,
tm2_touchkey_suspend, tm2_touchkey_resume);
static const struct i2c_device_id tm2_touchkey_id_table[] = {
{ TM2_TOUCHKEY_DEV_NAME, 0 },
{ },
};
MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table);
static const struct of_device_id tm2_touchkey_of_match[] = {
{ .compatible = "cypress,tm2-touchkey", },
{ },
};
MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match);
static struct i2c_driver tm2_touchkey_driver = {
.driver = {
.name = TM2_TOUCHKEY_DEV_NAME,
.pm = &tm2_touchkey_pm_ops,
.of_match_table = of_match_ptr(tm2_touchkey_of_match),
},
.probe = tm2_touchkey_probe,
.id_table = tm2_touchkey_id_table,
};
module_i2c_driver(tm2_touchkey_driver);
MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
MODULE_AUTHOR("Jaechul Lee <jcsing.lee@samsung.com>");
MODULE_DESCRIPTION("Samsung touchkey driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment