Staging: rt2860: remove dead APCLI_SUPPORT code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rt2860/common/mlme.c

@@ -563,9 +563,6 @@ VOID MlmeHandler(
 	IN PRTMP_ADAPTER pAd)
 {
 	MLME_QUEUE_ELEM 	   *Elem = NULL;
-#ifdef APCLI_SUPPORT
-	SHORT apcliIfIndex;
-#endif
 
 	// Only accept MLME and Frame from peer side, no other (control/data) frame should
 	// get into this state machine

drivers/staging/rt2860/common/netif_block.c

@@ -95,14 +95,6 @@ VOID StopNetIfQueue(
 	UCHAR IfIdx = 0;
 	BOOLEAN valid = FALSE;
 
-#ifdef APCLI_SUPPORT
-	if (RTMP_GET_PACKET_NET_DEVICE(pPacket) >= MIN_NET_DEVICE_FOR_APCLI)
-	{
-		IfIdx = (RTMP_GET_PACKET_NET_DEVICE(pPacket) - MIN_NET_DEVICE_FOR_APCLI) % MAX_APCLI_NUM;
-		NetDev = pAd->ApCfg.ApCliTab[IfIdx].dev;
-	}
-	else
-#endif // APCLI_SUPPORT //
 	{
 #ifdef MBSS_SUPPORT
 		if (pAd->OpMode == OPMODE_AP)

drivers/staging/rt2860/rtmp_def.h

@@ -330,10 +330,6 @@
 #define MAX_MESH_NUM				0
 
 #define MAX_APCLI_NUM				0
-#ifdef APCLI_SUPPORT
-#undef	MAX_APCLI_NUM
-#define MAX_APCLI_NUM				1
-#endif // APCLI_SUPPORT //
 
 #define MAX_MBSSID_NUM				1
 #ifdef MBSS_SUPPORT
@@ -948,79 +944,6 @@
 
 #define AP_WPA_FUNC_SIZE                (AP_MAX_WPA_PTK_STATE * AP_MAX_WPA_MSG)
 
-#ifdef APCLI_SUPPORT
-//ApCli authentication state machine
-#define APCLI_AUTH_REQ_IDLE                0
-#define APCLI_AUTH_WAIT_SEQ2               1
-#define APCLI_AUTH_WAIT_SEQ4               2
-#define APCLI_MAX_AUTH_STATE               3
-
-#define APCLI_AUTH_MACHINE_BASE            0
-#define APCLI_MT2_MLME_AUTH_REQ            0
-#define APCLI_MT2_MLME_DEAUTH_REQ          1
-#define APCLI_MT2_PEER_AUTH_EVEN           2
-#define APCLI_MT2_PEER_DEAUTH              3
-#define APCLI_MT2_AUTH_TIMEOUT             4
-#define APCLI_MAX_AUTH_MSG                 5
-
-#define APCLI_AUTH_FUNC_SIZE               (APCLI_MAX_AUTH_STATE * APCLI_MAX_AUTH_MSG)
-
-//ApCli association state machine
-#define APCLI_ASSOC_IDLE                   0
-#define APCLI_ASSOC_WAIT_RSP               1
-#define APCLI_MAX_ASSOC_STATE              2
-
-#define APCLI_ASSOC_MACHINE_BASE           0
-#define APCLI_MT2_MLME_ASSOC_REQ           0
-#define APCLI_MT2_MLME_DISASSOC_REQ        1
-#define APCLI_MT2_PEER_DISASSOC_REQ        2
-#define APCLI_MT2_PEER_ASSOC_RSP           3
-#define APCLI_MT2_ASSOC_TIMEOUT            4
-#define APCLI_MAX_ASSOC_MSG                5
-
-#define APCLI_ASSOC_FUNC_SIZE              (APCLI_MAX_ASSOC_STATE * APCLI_MAX_ASSOC_MSG)
-
-//ApCli sync state machine
-#define APCLI_SYNC_IDLE                   0  // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
-#define APCLI_JOIN_WAIT_PROBE_RSP         1
-#define APCLI_MAX_SYNC_STATE              2
-
-#define APCLI_SYNC_MACHINE_BASE           0
-#define APCLI_MT2_MLME_PROBE_REQ          0
-#define APCLI_MT2_PEER_PROBE_RSP          1
-#define APCLI_MT2_PROBE_TIMEOUT           2
-#define APCLI_MAX_SYNC_MSG                3
-
-#define APCLI_SYNC_FUNC_SIZE              (APCLI_MAX_SYNC_STATE * APCLI_MAX_SYNC_MSG)
-
-//ApCli ctrl state machine
-#define APCLI_CTRL_DISCONNECTED           0  // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
-#define APCLI_CTRL_PROBE                  1
-#define APCLI_CTRL_AUTH                   2
-#define APCLI_CTRL_AUTH_2                 3
-#define APCLI_CTRL_ASSOC                  4
-#define APCLI_CTRL_DEASSOC                5
-#define APCLI_CTRL_CONNECTED              6
-#define APCLI_MAX_CTRL_STATE              7
-
-#define APCLI_CTRL_MACHINE_BASE           0
-#define APCLI_CTRL_JOIN_REQ               0
-#define APCLI_CTRL_PROBE_RSP              1
-#define APCLI_CTRL_AUTH_RSP               2
-#define APCLI_CTRL_DISCONNECT_REQ         3
-#define APCLI_CTRL_PEER_DISCONNECT_REQ    4
-#define APCLI_CTRL_ASSOC_RSP              5
-#define APCLI_CTRL_DEASSOC_RSP            6
-#define APCLI_CTRL_JOIN_REQ_TIMEOUT       7
-#define APCLI_CTRL_AUTH_REQ_TIMEOUT       8
-#define APCLI_CTRL_ASSOC_REQ_TIMEOUT      9
-#define APCLI_MAX_CTRL_MSG                10
-
-#define APCLI_CTRL_FUNC_SIZE              (APCLI_MAX_CTRL_STATE * APCLI_MAX_CTRL_MSG)
-
-#endif	// APCLI_SUPPORT //
-
-
 // =============================================================================
 
 // value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header