Merge remote-tracking branches 'regulator/topic/of', 'regulator/topic/pwm',...

Merge remote-tracking branches 'regulator/topic/of', 'regulator/topic/pwm', 'regulator/topic/qcom' and 'regulator/topic/soft-start' into regulator-next

Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt

+Qualcomm SPMI Regulators
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+			"qcom,pm8841-regulators"
+			"qcom,pm8916-regulators"
+			"qcom,pm8941-regulators"
+
+- interrupts:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: List of OCP interrupts.
+
+- interrupt-names:
+	Usage: required if 'interrupts' property present
+	Value type: <string-array>
+	Definition: List of strings defining the names of the
+		    interrupts in the 'interrupts' property 1-to-1.
+		    Supported values are "ocp-<regulator_name>", where
+		    <regulator_name> corresponds to a voltage switch
+		    type regulator.
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_s6-supply:
+- vdd_s7-supply:
+- vdd_s8-supply:
+	Usage: optional (pm8841 only)
+	Value type: <phandle>
+	Definition: Reference to regulator supplying the input pin, as
+		    described in the data sheet.
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_l1_l3-supply:
+- vdd_l2-supply:
+- vdd_l4_l5_l6-supply:
+- vdd_l7-supply:
+- vdd_l8_l11_l14_l15_l16-supply:
+- vdd_l9_l10_l12_l13_l17_l18-supply:
+	Usage: optional (pm8916 only)
+	Value type: <phandle>
+	Definition: Reference to regulator supplying the input pin, as
+		    described in the data sheet.
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_l1_l3-supply:
+- vdd_l2_lvs_1_2_3-supply:
+- vdd_l4_l11-supply:
+- vdd_l5_l7-supply:
+- vdd_l6_l12_l14_l15-supply:
+- vdd_l8_l16_l18_19-supply:
+- vdd_l9_l10_l17_l22-supply:
+- vdd_l13_l20_l23_l24-supply:
+- vdd_l21-supply:
+- vin_5vs-supply:
+	Usage: optional (pm8941 only)
+	Value type: <phandle>
+	Definition: Reference to regulator supplying the input pin, as
+		    described in the data sheet.
+
+
+The regulator node houses sub-nodes for each regulator within the device. Each
+sub-node is identified using the node's name, with valid values listed for each
+of the PMICs below.
+
+pm8841:
+	s1, s2, s3, s4, s5, s6, s7, s8
+
+pm8916:
+	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+	l14, l15, l16, l17, l18
+
+pm8941:
+	s1, s2, s3, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14,
+	l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
+	mvs1, mvs2
+
+The content of each sub-node is defined by the standard binding for regulators -
+see regulator.txt - with additional custom properties described below:
+
+- regulator-initial-mode:
+	Usage: optional
+	Value type: <u32>
+	Descrption: 1 = Set initial mode to high power mode (HPM), also referred
+		    to as NPM.  HPM consumes more ground current than LPM, but
+		    it can source significantly higher load current. HPM is not
+		    available on boost type regulators. For voltage switch type
+		    regulators, HPM implies that over current protection and
+		    soft start are active all the time. 0 = Set initial mode to
+		    low power mode (LPM).
+
+Example:
+
+	regulators {
+		compatible = "qcom,pm8941-regulators";
+		vdd_l1_l3-supply = <&s1>;
+
+		s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		...
+
+		l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		....
+	};

drivers/regulator/Kconfig

@@ -522,6 +522,17 @@ config REGULATOR_QCOM_RPM
 	  Qualcomm RPM as a module. The module will be named
 	  "qcom_rpm-regulator".
 
+config REGULATOR_QCOM_SPMI
+	tristate "Qualcomm SPMI regulator driver"
+	depends on SPMI || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  regulators found in Qualcomm SPMI PMICs.
+
+	  Say M here if you want to include support for the regulators on the
+	  Qualcomm SPMI PMICs as a module. The module will be named
+	  "qcom_spmi-regulator".
+
 config REGULATOR_RC5T583
 	tristate "RICOH RC5T583 Power regulators"
 	depends on MFD_RC5T583

drivers/regulator/Makefile

@@ -62,6 +62,7 @@ obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
 obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
 obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o

drivers/regulator/of_regulator.c

@@ -304,7 +304,7 @@ struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
 		return NULL;
 	}
 
-	for_each_child_of_node(search, child) {
+	for_each_available_child_of_node(search, child) {
 		name = of_get_property(child, "regulator-compatible", NULL);
 		if (!name)
 			name = child->name;

drivers/regulator/pwm-regulator.c

@@ -21,10 +21,8 @@
 #include <linux/pwm.h>
 
 struct pwm_regulator_data {
-	struct regulator_desc desc;
 	struct pwm_voltages *duty_cycle_table;
 	struct pwm_device *pwm;
-	bool enabled;
 	int state;
 };
 
@@ -33,17 +31,17 @@ struct pwm_voltages {
 	unsigned int dutycycle;
 };
 
-static int pwm_regulator_get_voltage_sel(struct regulator_dev *dev)
+static int pwm_regulator_get_voltage_sel(struct regulator_dev *rdev)
 {
-	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 
 	return drvdata->state;
 }
 
-static int pwm_regulator_set_voltage_sel(struct regulator_dev *dev,
+static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
 					 unsigned selector)
 {
-	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 	unsigned int pwm_reg_period;
 	int dutycycle;
 	int ret;
@@ -55,30 +53,27 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *dev,
 
 	ret = pwm_config(drvdata->pwm, dutycycle, pwm_reg_period);
 	if (ret) {
-		dev_err(&dev->dev, "Failed to configure PWM\n");
+		dev_err(&rdev->dev, "Failed to configure PWM\n");
 		return ret;
 	}
 
 	drvdata->state = selector;
 
-	if (!drvdata->enabled) {
-		ret = pwm_enable(drvdata->pwm);
-		if (ret) {
-			dev_err(&dev->dev, "Failed to enable PWM\n");
-			return ret;
-		}
-		drvdata->enabled = true;
+	ret = pwm_enable(drvdata->pwm);
+	if (ret) {
+		dev_err(&rdev->dev, "Failed to enable PWM\n");
+		return ret;
 	}
 
 	return 0;
 }
 
-static int pwm_regulator_list_voltage(struct regulator_dev *dev,
+static int pwm_regulator_list_voltage(struct regulator_dev *rdev,
 				      unsigned selector)
 {
-	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 
-	if (selector >= drvdata->desc.n_voltages)
+	if (selector >= rdev->desc->n_voltages)
 		return -EINVAL;
 
 	return drvdata->duty_cycle_table[selector].uV;
@@ -91,7 +86,7 @@ static struct regulator_ops pwm_regulator_voltage_ops = {
 	.map_voltage     = regulator_map_voltage_iterate,
 };
 
-static const struct regulator_desc pwm_regulator_desc = {
+static struct regulator_desc pwm_regulator_desc = {
 	.name		= "pwm-regulator",
 	.ops		= &pwm_regulator_voltage_ops,
 	.type		= REGULATOR_VOLTAGE,
@@ -117,8 +112,6 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 	if (!drvdata)
 		return -ENOMEM;
 
-	memcpy(&drvdata->desc, &pwm_regulator_desc, sizeof(pwm_regulator_desc));
-
 	/* determine the number of voltage-table */
 	prop = of_find_property(np, "voltage-table", &length);
 	if (!prop) {
@@ -133,7 +126,7 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	drvdata->desc.n_voltages = length / sizeof(*drvdata->duty_cycle_table);
+	pwm_regulator_desc.n_voltages = length / sizeof(*drvdata->duty_cycle_table);
 
 	drvdata->duty_cycle_table = devm_kzalloc(&pdev->dev,
 						 length, GFP_KERNEL);
@@ -150,7 +143,7 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 	}
 
 	config.init_data = of_get_regulator_init_data(&pdev->dev, np,
-						      &drvdata->desc);
+						      &pwm_regulator_desc);
 	if (!config.init_data)
 		return -ENOMEM;
 
@@ -165,10 +158,10 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 	}
 
 	regulator = devm_regulator_register(&pdev->dev,
-					    &drvdata->desc, &config);
+					    &pwm_regulator_desc, &config);
 	if (IS_ERR(regulator)) {
 		dev_err(&pdev->dev, "Failed to register regulator %s\n",
-			drvdata->desc.name);
+			pwm_regulator_desc.name);
 		return PTR_ERR(regulator);
 	}
 

include/linux/regulator/driver.h

@@ -112,6 +112,7 @@ struct regulator_linear_range {
  *               to stabilise after being set to a new value, in microseconds.
  *               The function provides the from and to voltage selector, the
  *               function should return the worst case.
+ * @set_soft_start: Enable soft start for the regulator.
  *
  * @set_suspend_voltage: Set the voltage for the regulator when the system
  *                       is suspended.

include/linux/regulator/machine.h

@@ -88,6 +88,7 @@ struct regulator_state {
  *           applied.
  * @apply_uV: Apply the voltage constraint when initialising.
  * @ramp_disable: Disable ramp delay when initialising or when setting voltage.
+ * @soft_start: Enable soft start so that voltage ramps slowly.
  * @pull_down: Enable pull down when regulator is disabled.
  *
  * @input_uV: Input voltage for regulator when supplied by another regulator.