ARM: dts: imx6sx-sdb: Add MQS support

Add MQS support. As the pin conflict with usdhc2, then need
to add a separate dts.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/Makefile

@@ -592,6 +592,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
 	imx6sx-sdb-reva.dtb \
 	imx6sx-sdb-sai.dtb \
 	imx6sx-sdb.dtb \
+	imx6sx-sdb-mqs.dtb \
 	imx6sx-softing-vining-2000.dtb \
 	imx6sx-udoo-neo-basic.dtb \
 	imx6sx-udoo-neo-extended.dtb \

arch/arm/boot/dts/imx6sx-sdb-mqs.dts

+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
+
+#include "imx6sx-sdb.dts"
+/ {
+
+	sound {
+		status = "disabled";
+	};
+
+	sound-mqs {
+		compatible = "fsl,imx6sx-sdb-mqs",
+			     "fsl,imx-audio-mqs";
+		model = "mqs-audio";
+		audio-cpu = <&sai1>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&mqs>;
+	};
+};
+
+&usdhc2 {
+	/* pin conflict with mqs*/
+	status = "disabled";
+};
+
+&mqs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mqs>;
+	clocks = <&clks IMX6SX_CLK_SAI1>;
+	clock-names = "mclk";
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-0 = <>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "disabled";
+};
+
+&sdma {
+	gpr = <&gpr>;
+	/* SDMA event remap for SAI1 */
+	fsl,sdma-event-remap = <0 15 1>, <0 16 1>;
+};

arch/arm/boot/dts/imx6sx-sdb.dtsi

@@ -522,6 +522,13 @@ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
 			>;
 		};
 
+		pinctrl_mqs: mqsgrp {
+			fsl,pins = <
+				MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0
+				MX6SX_PAD_SD2_CMD__MQS_LEFT  0x120b0
+			>;
+		};
+
 		pinctrl_pcie: pciegrp {
 			fsl,pins = <
 				MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0

arch/arm/boot/dts/imx6sx.dtsi

@@ -134,6 +134,12 @@ anaclk2: clock-anaclk2 {
 		clock-output-names = "anaclk2";
 	};
 
+	mqs: mqs {
+		compatible = "fsl,imx6sx-mqs";
+		gpr = <&gpr>;
+		status = "disabled";
+	};
+
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
 		interrupt-parent = <&gpc>;