Commit 73770ca5 authored by Hersen Wu's avatar Hersen Wu Committed by Alex Deucher

drm/amd/display: AUX will exit when HPD LOW detected

This change shorten wait time when HPD LOW. With HPD LOW, without this
change, AUX routine delay is 450us. With this change, it is 42us.
Signed-off-by: default avatarHersen Wu <hersenxs.wu@amd.com>
Reviewed-by: default avatarTony Cheng <Tony.Cheng@amd.com>
Reviewed-by: default avatarHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent f9430b23
......@@ -157,6 +157,10 @@ static void process_read_reply(
ctx->operation_succeeded = false;
}
break;
case AUX_TRANSACTION_REPLY_HPD_DISCON:
ctx->status = I2CAUX_TRANSACTION_STATUS_FAILED_HPD_DISCON;
ctx->operation_succeeded = false;
break;
default:
ctx->status = I2CAUX_TRANSACTION_STATUS_UNKNOWN;
ctx->operation_succeeded = false;
......@@ -215,6 +219,10 @@ static void process_read_request(
* so we should not wait here */
}
break;
case AUX_CHANNEL_OPERATION_FAILED_HPD_DISCON:
ctx->status = I2CAUX_TRANSACTION_STATUS_FAILED_HPD_DISCON;
ctx->operation_succeeded = false;
break;
default:
ctx->status = I2CAUX_TRANSACTION_STATUS_UNKNOWN;
ctx->operation_succeeded = false;
......@@ -370,6 +378,10 @@ static void process_write_reply(
ctx->operation_succeeded = false;
}
break;
case AUX_TRANSACTION_REPLY_HPD_DISCON:
ctx->status = I2CAUX_TRANSACTION_STATUS_FAILED_HPD_DISCON;
ctx->operation_succeeded = false;
break;
default:
ctx->status = I2CAUX_TRANSACTION_STATUS_UNKNOWN;
ctx->operation_succeeded = false;
......@@ -422,6 +434,10 @@ static void process_write_request(
* so we should not wait here */
}
break;
case AUX_CHANNEL_OPERATION_FAILED_HPD_DISCON:
ctx->status = I2CAUX_TRANSACTION_STATUS_FAILED_HPD_DISCON;
ctx->operation_succeeded = false;
break;
default:
ctx->status = I2CAUX_TRANSACTION_STATUS_UNKNOWN;
ctx->operation_succeeded = false;
......
......@@ -51,6 +51,8 @@ enum aux_transaction_reply {
AUX_TRANSACTION_REPLY_I2C_NACK = 0x10,
AUX_TRANSACTION_REPLY_I2C_DEFER = 0x20,
AUX_TRANSACTION_REPLY_HPD_DISCON = 0x40,
AUX_TRANSACTION_REPLY_INVALID = 0xFF
};
......@@ -64,7 +66,8 @@ enum aux_channel_operation_result {
AUX_CHANNEL_OPERATION_SUCCEEDED,
AUX_CHANNEL_OPERATION_FAILED_REASON_UNKNOWN,
AUX_CHANNEL_OPERATION_FAILED_INVALID_REPLY,
AUX_CHANNEL_OPERATION_FAILED_TIMEOUT
AUX_CHANNEL_OPERATION_FAILED_TIMEOUT,
AUX_CHANNEL_OPERATION_FAILED_HPD_DISCON
};
struct aux_engine;
......
......@@ -291,6 +291,12 @@ static void process_channel_reply(
value = REG_GET(AUX_SW_STATUS,
AUX_SW_REPLY_BYTE_COUNT, &bytes_replied);
/* in case HPD is LOW, exit AUX transaction */
if ((value & AUX_SW_STATUS__AUX_SW_HPD_DISCON_MASK)) {
reply->status = AUX_TRANSACTION_REPLY_HPD_DISCON;
return;
}
if (bytes_replied) {
uint32_t reply_result;
......@@ -347,8 +353,10 @@ static void process_channel_reply(
* because there was surely an error that was asserted
* that should have been handled
* for hot plug case, this could happens*/
if (!(value & AUX_SW_STATUS__AUX_SW_HPD_DISCON_MASK))
if (!(value & AUX_SW_STATUS__AUX_SW_HPD_DISCON_MASK)) {
reply->status = AUX_TRANSACTION_REPLY_INVALID;
ASSERT_CRITICAL(false);
}
}
}
......@@ -371,6 +379,10 @@ static enum aux_channel_operation_result get_channel_status(
value = REG_WAIT(AUX_SW_STATUS, AUX_SW_DONE, 1,
10, aux110->timeout_period/10);
/* in case HPD is LOW, exit AUX transaction */
if ((value & AUX_SW_STATUS__AUX_SW_HPD_DISCON_MASK))
return AUX_CHANNEL_OPERATION_FAILED_HPD_DISCON;
/* Note that the following bits are set in 'status.bits'
* during CTS 4.2.1.2 (FW 3.3.1):
* AUX_SW_RX_MIN_COUNT_VIOL, AUX_SW_RX_INVALID_STOP,
......@@ -402,10 +414,10 @@ static enum aux_channel_operation_result get_channel_status(
return AUX_CHANNEL_OPERATION_SUCCEEDED;
}
} else {
/*time_elapsed >= aux_engine->timeout_period */
if (!(value & AUX_SW_STATUS__AUX_SW_HPD_DISCON_MASK))
ASSERT_CRITICAL(false);
/*time_elapsed >= aux_engine->timeout_period
* AUX_SW_STATUS__AUX_SW_HPD_DISCON = at this point
*/
ASSERT_CRITICAL(false);
return AUX_CHANNEL_OPERATION_FAILED_TIMEOUT;
}
}
......
......@@ -53,7 +53,8 @@ enum i2caux_transaction_status {
I2CAUX_TRANSACTION_STATUS_FAILED_INCOMPLETE,
I2CAUX_TRANSACTION_STATUS_FAILED_OPERATION,
I2CAUX_TRANSACTION_STATUS_FAILED_INVALID_OPERATION,
I2CAUX_TRANSACTION_STATUS_FAILED_BUFFER_OVERFLOW
I2CAUX_TRANSACTION_STATUS_FAILED_BUFFER_OVERFLOW,
I2CAUX_TRANSACTION_STATUS_FAILED_HPD_DISCON
};
struct i2caux_transaction_request {
......
......@@ -40,7 +40,8 @@ enum ddc_result {
DDC_RESULT_FAILED_INCOMPLETE,
DDC_RESULT_FAILED_OPERATION,
DDC_RESULT_FAILED_INVALID_OPERATION,
DDC_RESULT_FAILED_BUFFER_OVERFLOW
DDC_RESULT_FAILED_BUFFER_OVERFLOW,
DDC_RESULT_FAILED_HPD_DISCON
};
enum ddc_service_type {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment