[SERIAL] Support for Intashield 2 port PCI serial card

Here is a patch that adds support for the Instashield IS-200 2 port PCI
serial card.
Signed-off-by: Peter Horton <pdh@colonel-panic.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

drivers/serial/8250_pci.c

@@ -936,6 +936,7 @@ enum pci_board_num_t {
 	pbn_b1_8_1382400,
 
 	pbn_b2_1_115200,
+	pbn_b2_2_115200,
 	pbn_b2_8_115200,
 
 	pbn_b2_1_460800,
@@ -1243,6 +1244,12 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.base_baud	= 115200,
 		.uart_offset	= 8,
 	},
+	[pbn_b2_2_115200] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
 	[pbn_b2_8_115200] = {
 		.flags		= FL_BASE2,
 		.num_ports	= 8,
@@ -2339,6 +2346,13 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_1_115200 },
 
+	/*
+	 * IntaShield IS-200
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,	/* 135a.0811 */
+		pbn_b2_2_115200 },
+
 	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,
 	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL

include/linux/pci_ids.h

@@ -1726,6 +1726,9 @@
 #define PCI_VENDOR_ID_DOMEX		0x134a
 #define PCI_DEVICE_ID_DOMEX_DMX3191D	0x0001
 
+#define PCI_VENDOR_ID_INTASHIELD	0x135a
+#define PCI_DEVICE_ID_INTASHIELD_IS200	0x0d80
+
 #define PCI_VENDOR_ID_QUATECH		0x135C
 #define PCI_DEVICE_ID_QUATECH_QSC100	0x0010
 #define PCI_DEVICE_ID_QUATECH_DSC100	0x0020