Commit 73b39d4b authored by Thomas Petazzoni's avatar Thomas Petazzoni Committed by Jason Cooper

arm: mach-dove: use plus instead of or for address definitions

Since we are going to use IOMEM() to define many base virtual
addresses, we can no longer use binary or to define the individual
register addresses ("binary or" arithmetic on pointers is not
allowed). Instead, use the more conventional plus operator to do so.

The binary or operators were actually not useful because the low-order
bits of the base address were always zero, so the usage of the binary
or operators was effectively identical to a plus operator.
Signed-off-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
Tested-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 55d512e2
......@@ -13,22 +13,22 @@
#include <mach/dove.h>
#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0000)
#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0000)
#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
#define CPU_CTRL_PCIE0_LINK 0x00000001
#define CPU_RESET 0x00000002
#define CPU_CTRL_PCIE1_LINK 0x00000008
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
#define IRQ_CAUSE_LOW_OFF 0x0000
#define IRQ_MASK_LOW_OFF 0x0004
#define FIQ_MASK_LOW_OFF 0x0008
......@@ -47,9 +47,9 @@
#define ENDPOINT_MASK_HIGH (IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
#define PCIE_INTERRUPT_MASK (IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c)
#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE + 0x011c)
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
#endif
......@@ -64,75 +64,75 @@
*/
/* SPI, I2C, UART */
#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x11000)
#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12000)
#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12000)
#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12100)
#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12100)
#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12200)
#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12200)
#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12300)
#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12300)
#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x10600)
#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x14600)
#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x11000)
#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12000)
#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12000)
#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12100)
#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12100)
#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12200)
#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12200)
#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12300)
#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12300)
#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x10600)
#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x14600)
/* North-South Bridge */
#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000)
#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000)
#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x20000)
#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x20000)
/* Cryptographic Engine */
#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000)
#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x30000)
/* PCIe 0 */
#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x40000)
#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x40000)
/* USB */
#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x50000)
#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x51000)
#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x50000)
#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x51000)
/* XOR 0 Engine */
#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60800)
#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60800)
#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60A00)
#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60A00)
#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60800)
#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60800)
#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60A00)
#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60A00)
/* XOR 1 Engine */
#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60900)
#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60900)
#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60B00)
#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60B00)
#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60900)
#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60900)
#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60B00)
#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60B00)
/* Gigabit Ethernet */
#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x70000)
#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x70000)
/* PCIe 1 */
#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x80000)
#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x80000)
/* CAFE */
#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x92000)
#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x90000)
#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x94000)
#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x98000)
#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x92000)
#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x90000)
#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x94000)
#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x98000)
/* SATA */
#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xa0000)
#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xa0000)
/* I2S/SPDIF */
#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb0000)
#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb4000)
#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb0000)
#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb4000)
/* NAND Flash Controller */
#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xc0000)
#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xc0000)
/* MPP, GPIO, Reset Sampling */
#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200)
#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0200)
#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014)
#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018)
#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400)
#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0420)
#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe8400)
#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c)
#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE + 0x014)
#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE + 0x018)
#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0400)
#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0420)
#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe8400)
#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe803c)
#define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1)
#define DOVE_NAND_GPIO_EN (1 << 0)
#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40)
......@@ -144,44 +144,44 @@
#define DOVE_SD0_GPIO_SEL (1 << 0)
/* Power Management */
#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000)
#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0000)
#define DOVE_PMU_SIG_CTRL (DOVE_PMU_VIRT_BASE + 0x802c)
/* Real Time Clock */
#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500)
#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xd8500)
/* AC97 */
#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe0000)
#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe0000)
#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe0000)
#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe0000)
/* Peripheral DMA */
#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe4000)
#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe4000)
#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe4000)
#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe4000)
#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C)
#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE + 0xe802C)
#define DOVE_TWSI_ENABLE_OPTION1 (1 << 7)
#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030)
#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE + 0xe8030)
#define DOVE_TWSI_ENABLE_OPTION2 (1 << 20)
#define DOVE_TWSI_ENABLE_OPTION3 (1 << 21)
#define DOVE_TWSI_OPTION3_GPIO (1 << 22)
#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xec000)
#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034)
#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xec000)
#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE + 0xe8034)
#define DOVE_SSP_ON_AU1 (1 << 0)
#define DOVE_SSP_CLOCK_ENABLE (1 << 1)
#define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11)
/* Memory Controller */
#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE | 0x00000)
#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE + 0x00000)
/* LCD Controller */
#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x20000)
#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x30000)
#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000)
#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x20000)
#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000)
#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x30000)
/* Graphic Engine */
#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x40000)
#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x40000)
/* Video Engine */
#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x400000)
#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x400000)
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment