Commit 73b46320 authored by Brian Cavagnolo's avatar Brian Cavagnolo Committed by John W. Linville

mwl8k: refactor in preparation for APIv2 update

Specifically, APIv2 will specify a variable number of AMPDU
queues in the MWL8K_CMD_GET_HW_SPEC.  So init the tx queues after
MWL8K_CMD_GET_HW_SPEC for ap fw.

Also, we make it safe to deinit queues that have not been init'd.
This happens if the mwl8k_get_hw_spec_ap routine fails, for
example.
Signed-off-by: default avatarNishant Sarmukadam <nishants@marvell.com>
Signed-off-by: default avatarBrian Cavagnolo <brian@cozybit.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent c835b214
......@@ -191,6 +191,7 @@ struct mwl8k_priv {
struct mwl8k_rx_queue rxq[MWL8K_RX_QUEUES];
struct mwl8k_tx_queue txq[MWL8K_TX_QUEUES];
u32 txq_offset[MWL8K_TX_QUEUES];
bool radio_on;
bool radio_short_preamble;
......@@ -1126,6 +1127,9 @@ static void mwl8k_rxq_deinit(struct ieee80211_hw *hw, int index)
struct mwl8k_rx_queue *rxq = priv->rxq + index;
int i;
if (rxq->rxd == NULL)
return;
for (i = 0; i < MWL8K_RX_DESCS; i++) {
if (rxq->buf[i].skb != NULL) {
pci_unmap_single(priv->pdev,
......@@ -1560,6 +1564,9 @@ static void mwl8k_txq_deinit(struct ieee80211_hw *hw, int index)
struct mwl8k_priv *priv = hw->priv;
struct mwl8k_tx_queue *txq = priv->txq + index;
if (txq->txd == NULL)
return;
mwl8k_txq_reclaim(hw, index, INT_MAX, 1);
kfree(txq->skb);
......@@ -2058,23 +2065,16 @@ static int mwl8k_cmd_get_hw_spec_ap(struct ieee80211_hw *hw)
priv->ap_macids_supported = 0x000000ff;
priv->sta_macids_supported = 0x00000000;
off = le32_to_cpu(cmd->wcbbase0) & 0xffff;
iowrite32(priv->txq[0].txd_dma, priv->sram + off);
off = le32_to_cpu(cmd->rxwrptr) & 0xffff;
iowrite32(priv->rxq[0].rxd_dma, priv->sram + off);
off = le32_to_cpu(cmd->rxrdptr) & 0xffff;
iowrite32(priv->rxq[0].rxd_dma, priv->sram + off);
off = le32_to_cpu(cmd->wcbbase1) & 0xffff;
iowrite32(priv->txq[1].txd_dma, priv->sram + off);
off = le32_to_cpu(cmd->wcbbase2) & 0xffff;
iowrite32(priv->txq[2].txd_dma, priv->sram + off);
off = le32_to_cpu(cmd->wcbbase3) & 0xffff;
iowrite32(priv->txq[3].txd_dma, priv->sram + off);
priv->txq_offset[0] = le32_to_cpu(cmd->wcbbase0) & 0xffff;
priv->txq_offset[1] = le32_to_cpu(cmd->wcbbase1) & 0xffff;
priv->txq_offset[2] = le32_to_cpu(cmd->wcbbase2) & 0xffff;
priv->txq_offset[3] = le32_to_cpu(cmd->wcbbase3) & 0xffff;
}
done:
......@@ -4600,6 +4600,23 @@ static int mwl8k_init_firmware(struct ieee80211_hw *hw, char *fw_image,
return rc;
}
static int mwl8k_init_txqs(struct ieee80211_hw *hw)
{
struct mwl8k_priv *priv = hw->priv;
int rc = 0;
int i;
for (i = 0; i < MWL8K_TX_QUEUES; i++) {
rc = mwl8k_txq_init(hw, i);
if (rc)
break;
if (priv->ap_fw)
iowrite32(priv->txq[i].txd_dma,
priv->sram + priv->txq_offset[i]);
}
return rc;
}
/* initialize hw after successfully loading a firmware image */
static int mwl8k_probe_hw(struct ieee80211_hw *hw)
{
......@@ -4627,8 +4644,14 @@ static int mwl8k_probe_hw(struct ieee80211_hw *hw)
goto err_stop_firmware;
rxq_refill(hw, 0, INT_MAX);
for (i = 0; i < MWL8K_TX_QUEUES; i++) {
rc = mwl8k_txq_init(hw, i);
/* For the sta firmware, we need to know the dma addresses of tx queues
* before sending MWL8K_CMD_GET_HW_SPEC. So we must initialize them
* prior to issuing this command. But for the AP case, we learn the
* total number of queues from the result CMD_GET_HW_SPEC, so for this
* case we must initialize the tx queues after.
*/
if (!priv->ap_fw) {
rc = mwl8k_init_txqs(hw);
if (rc)
goto err_free_queues;
}
......@@ -4656,6 +4679,8 @@ static int mwl8k_probe_hw(struct ieee80211_hw *hw)
/* Get config data, mac addrs etc */
if (priv->ap_fw) {
rc = mwl8k_cmd_get_hw_spec_ap(hw);
if (!rc)
rc = mwl8k_init_txqs(hw);
if (!rc)
rc = mwl8k_cmd_set_hw_spec(hw);
} else {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment