staging: r8712u: Remove defines that are not used

This driver has a number of defines, etc. that are not used.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8712/drv_types.h

@@ -70,9 +70,7 @@ struct	qos_priv	{
 #include "rtl871x_event.h"
 #include "rtl871x_led.h"
 
-#define SPEC_DEV_ID_NONE BIT(0)
 #define SPEC_DEV_ID_DISABLE_HT BIT(1)
-#define SPEC_DEV_ID_ENABLE_PS BIT(2)
 
 struct specific_device_id {
 	u32		flags;
@@ -127,13 +125,6 @@ struct registry_priv {
 	u8 wifi_test;
 };
 
-/* For registry parameters */
-#define RGTRY_OFT(field) ((addr_t)FIELD_OFFSET(struct registry_priv, field))
-#define RGTRY_SZ(field)   sizeof(((struct registry_priv *)0)->field)
-#define BSSID_OFT(field) ((addr_t)FIELD_OFFSET(struct ndis_wlan_bssid_ex, \
-			 field))
-#define BSSID_SZ(field)   sizeof(((struct ndis_wlan_bssid_ex *)0)->field)
-
 struct dvobj_priv {
 	struct _adapter *padapter;
 	u32 nr_endpoint;

drivers/staging/rtl8712/rtl871x_pwrctrl.h

@@ -30,26 +30,7 @@
 #include "drv_types.h"
 
 
-#define FW_PWR0	0
-#define FW_PWR1		1
-#define FW_PWR2		2
-#define FW_PWR3		3
-
-
-#define HW_PWR0	7
-#define HW_PWR1		6
-#define HW_PWR2		2
-#define HW_PWR3	0
-#define HW_PWR4	8
-
-#define FW_PWRMSK	0x7
-
-
-#define XMIT_ALIVE	BIT(0)
-#define RECV_ALIVE	BIT(1)
 #define CMD_ALIVE	BIT(2)
-#define EVT_ALIVE	BIT(3)
-
 
 enum Power_Mgnt {
 	PS_MODE_ACTIVE	= 0	,
@@ -66,7 +47,6 @@ enum Power_Mgnt {
 	PS_MODE_NUM
 };
 
-
 /*
 	BIT[2:0] = HW state
 	BIT[3] = Protocol PS state, 0: register active state,

drivers/staging/rtl8712/usb_intf.c

@@ -37,7 +37,6 @@
 #include "recv_osdep.h"
 #include "xmit_osdep.h"
 #include "rtl8712_efuse.h"
-#include "usb_vendor_req.h"
 #include "usb_ops.h"
 #include "usb_osintf.h"
 

drivers/staging/rtl8712/usb_osintf.h

@@ -28,9 +28,6 @@
 
 #include "osdep_service.h"
 #include "drv_types.h"
-#include "usb_vendor_req.h"
-
-#define USBD_HALTED(Status) ((u32)(Status) >> 30 == 3)
 
 extern char *r8712_initmac;
 

drivers/staging/rtl8712/usb_vendor_req.h

-/******************************************************************************
- *
- * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * Modifications for inclusion into the Linux staging tree are
- * Copyright(c) 2010 Larry Finger. All rights reserved.
- *
- * Contact information:
- * WLAN FAE <wlanfae@realtek.com>
- * Larry Finger <Larry.Finger@lwfinger.net>
- *
- ******************************************************************************/
-#ifndef _USB_VENDOR_REQUEST_H_
-#define _USB_VENDOR_REQUEST_H_
-
-/*4	Set/Get Register related wIndex/Data */
-#define	RT_USB_RESET_MASK_OFF		0
-#define	RT_USB_RESET_MASK_ON		1
-#define	RT_USB_SLEEP_MASK_OFF		0
-#define	RT_USB_SLEEP_MASK_ON		1
-#define	RT_USB_LDO_ON			1
-#define	RT_USB_LDO_OFF			0
-
-/*4	Set/Get SYSCLK related	wValue or Data */
-#define	RT_USB_SYSCLK_32KHZ		0
-#define	RT_USB_SYSCLK_40MHZ		1
-#define	RT_USB_SYSCLK_60MHZ		2
-
-enum RT_USB_BREQUEST {
-	RT_USB_SET_REGISTER		= 1,
-	RT_USB_SET_SYSCLK		= 2,
-	RT_USB_GET_SYSCLK		= 3,
-	RT_USB_GET_REGISTER		= 4
-};
-
-enum RT_USB_WVALUE {
-	RT_USB_RESET_MASK	=	1,
-	RT_USB_SLEEP_MASK	=	2,
-	RT_USB_USB_HRCPWM	=	3,
-	RT_USB_LDO		=	4,
-	RT_USB_BOOT_TYPE	=	5
-};
-
-#endif
-