drm/kmb: Enable ADV bridge after modeset

On KMB, ADV bridge must be programmed and powered on prior to
MIPI DSI HW initialization.

v2: changed to atomic_bridge_chain_enable (Sam)

Fixes: 98521f4d ("drm/kmb: Mipi DSI part of the display driver")
Co-developed-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019230719.789958-1-anitha.chrisanthus@intel.comAcked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drivers/gpu/drm/kmb/kmb_crtc.c

@@ -66,7 +66,8 @@ static const struct drm_crtc_funcs kmb_crtc_funcs = {
 	.disable_vblank = kmb_crtc_disable_vblank,
 };
 
-static void kmb_crtc_set_mode(struct drm_crtc *crtc)
+static void kmb_crtc_set_mode(struct drm_crtc *crtc,
+			      struct drm_atomic_state *old_state)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_display_mode *m = &crtc->state->adjusted_mode;
@@ -75,7 +76,7 @@ static void kmb_crtc_set_mode(struct drm_crtc *crtc)
 	unsigned int val = 0;
 
 	/* Initialize mipi */
-	kmb_dsi_mode_set(kmb->kmb_dsi, m, kmb->sys_clk_mhz);
+	kmb_dsi_mode_set(kmb->kmb_dsi, m, kmb->sys_clk_mhz, old_state);
 	drm_info(dev,
 		 "vfp= %d vbp= %d vsync_len=%d hfp=%d hbp=%d hsync_len=%d\n",
 		 m->crtc_vsync_start - m->crtc_vdisplay,
@@ -138,7 +139,7 @@ static void kmb_crtc_atomic_enable(struct drm_crtc *crtc,
 	struct kmb_drm_private *kmb = crtc_to_kmb_priv(crtc);
 
 	clk_prepare_enable(kmb->kmb_clk.clk_lcd);
-	kmb_crtc_set_mode(crtc);
+	kmb_crtc_set_mode(crtc, state);
 	drm_crtc_vblank_on(crtc);
 }
 

drivers/gpu/drm/kmb/kmb_dsi.c

@@ -1331,7 +1331,8 @@ static u32 mipi_tx_init_dphy(struct kmb_dsi *kmb_dsi,
 	return 0;
 }
 
-static void connect_lcd_to_mipi(struct kmb_dsi *kmb_dsi)
+static void connect_lcd_to_mipi(struct kmb_dsi *kmb_dsi,
+				struct drm_atomic_state *old_state)
 {
 	struct regmap *msscam;
 
@@ -1340,7 +1341,7 @@ static void connect_lcd_to_mipi(struct kmb_dsi *kmb_dsi)
 		dev_dbg(kmb_dsi->dev, "failed to get msscam syscon");
 		return;
 	}
-
+	drm_atomic_bridge_chain_enable(adv_bridge, old_state);
 	/* DISABLE MIPI->CIF CONNECTION */
 	regmap_write(msscam, MSS_MIPI_CIF_CFG, 0);
 
@@ -1351,7 +1352,7 @@ static void connect_lcd_to_mipi(struct kmb_dsi *kmb_dsi)
 }
 
 int kmb_dsi_mode_set(struct kmb_dsi *kmb_dsi, struct drm_display_mode *mode,
-		     int sys_clk_mhz)
+		     int sys_clk_mhz, struct drm_atomic_state *old_state)
 {
 	u64 data_rate;
 
@@ -1399,7 +1400,7 @@ int kmb_dsi_mode_set(struct kmb_dsi *kmb_dsi, struct drm_display_mode *mode,
 	/* Dphy initialization */
 	mipi_tx_init_dphy(kmb_dsi, &mipi_tx_init_cfg);
 
-	connect_lcd_to_mipi(kmb_dsi);
+	connect_lcd_to_mipi(kmb_dsi, old_state);
 	dev_info(kmb_dsi->dev, "mipi hw initialized");
 
 	return 0;

drivers/gpu/drm/kmb/kmb_dsi.h

@@ -380,7 +380,7 @@ int kmb_dsi_host_bridge_init(struct device *dev);
 struct kmb_dsi *kmb_dsi_init(struct platform_device *pdev);
 void kmb_dsi_host_unregister(struct kmb_dsi *kmb_dsi);
 int kmb_dsi_mode_set(struct kmb_dsi *kmb_dsi, struct drm_display_mode *mode,
-		     int sys_clk_mhz);
+		     int sys_clk_mhz, struct drm_atomic_state *old_state);
 int kmb_dsi_map_mmio(struct kmb_dsi *kmb_dsi);
 int kmb_dsi_clk_init(struct kmb_dsi *kmb_dsi);
 int kmb_dsi_encoder_init(struct drm_device *dev, struct kmb_dsi *kmb_dsi);