drm/bridge/synopsys: dsi: use adjusted_mode in mode_set

The "adjusted_mode" clock value (ie the real pixel clock) is more
accurate than "mode" clock value (ie the panel/bridge requested
clock value). It offers a better preciseness for timing
computations and allows to reduce the extra dsi bandwidth in
burst mode (from ~20% to ~10-12%, hw platform dependent).
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125155504.8611-1-philippe.cornu@st.com

drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c

@@ -771,20 +771,20 @@ static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
 
 	clk_prepare_enable(dsi->pclk);
 
-	ret = phy_ops->get_lane_mbps(priv_data, mode, dsi->mode_flags,
+	ret = phy_ops->get_lane_mbps(priv_data, adjusted_mode, dsi->mode_flags,
 				     dsi->lanes, dsi->format, &dsi->lane_mbps);
 	if (ret)
 		DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");
 
 	pm_runtime_get_sync(dsi->dev);
 	dw_mipi_dsi_init(dsi);
-	dw_mipi_dsi_dpi_config(dsi, mode);
+	dw_mipi_dsi_dpi_config(dsi, adjusted_mode);
 	dw_mipi_dsi_packet_handler_config(dsi);
 	dw_mipi_dsi_video_mode_config(dsi);
-	dw_mipi_dsi_video_packet_config(dsi, mode);
+	dw_mipi_dsi_video_packet_config(dsi, adjusted_mode);
 	dw_mipi_dsi_command_mode_config(dsi);
-	dw_mipi_dsi_line_timer_config(dsi, mode);
-	dw_mipi_dsi_vertical_timing_config(dsi, mode);
+	dw_mipi_dsi_line_timer_config(dsi, adjusted_mode);
+	dw_mipi_dsi_vertical_timing_config(dsi, adjusted_mode);
 
 	dw_mipi_dsi_dphy_init(dsi);
 	dw_mipi_dsi_dphy_timing_config(dsi);
@@ -798,7 +798,7 @@ static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
 
 	dw_mipi_dsi_dphy_enable(dsi);
 
-	dw_mipi_dsi_wait_for_two_frames(mode);
+	dw_mipi_dsi_wait_for_two_frames(adjusted_mode);
 
 	/* Switch to cmd mode for panel-bridge pre_enable & panel prepare */
 	dw_mipi_dsi_set_mode(dsi, 0);