USB: fix usb_reset_device and usb_reset_composite_device(take 3)

This patch renames the existing usb_reset_device in hub.c to
usb_reset_and_verify_device and renames the existing
usb_reset_composite_device to usb_reset_device. Also the new
usb_reset_and_verify_device does't need to be EXPORTED .

The idea of the patch is that external interface driver
should warn the other interfaces' driver of the same
device before and after reseting the usb device. One interface
driver shoud call _old_ usb_reset_composite_device instead of
_old_ usb_reset_device since it can't assume the device contains
only one interface. The _old_ usb_reset_composite_device
is safe for single interface device also. we rename the two
functions to make the change easily.

This patch is under guideline from Alan Stern.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>

drivers/hid/usbhid/hid-core.c

@@ -122,7 +122,7 @@ static void hid_reset(struct work_struct *work)
 		dev_dbg(&usbhid->intf->dev, "resetting device\n");
 		rc = rc_lock = usb_lock_device_for_reset(hid_to_usb_dev(hid), usbhid->intf);
 		if (rc_lock >= 0) {
-			rc = usb_reset_composite_device(hid_to_usb_dev(hid));
+			rc = usb_reset_device(hid_to_usb_dev(hid));
 			if (rc_lock)
 				usb_unlock_device(hid_to_usb_dev(hid));
 		}

drivers/usb/core/devio.c

@@ -872,7 +872,7 @@ static int proc_connectinfo(struct dev_state *ps, void __user *arg)
 
 static int proc_resetdevice(struct dev_state *ps)
 {
-	return usb_reset_composite_device(ps->dev);
+	return usb_reset_device(ps->dev);
 }
 
 static int proc_setintf(struct dev_state *ps, void __user *arg)

drivers/usb/core/hub.c

@@ -135,6 +135,8 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
 #define HUB_DEBOUNCE_STABLE	 100
 
 
+static int usb_reset_and_verify_device(struct usb_device *udev);
+
 static inline char *portspeed(int portstatus)
 {
 	if (portstatus & (1 << USB_PORT_FEAT_HIGHSPEED))
@@ -1971,7 +1973,7 @@ static int finish_port_resume(struct usb_device *udev)
 	 * resumed.
 	 */
 	if (udev->reset_resume)
-		status = usb_reset_device(udev);
+		status = usb_reset_and_verify_device(udev);
 
  	/* 10.5.4.5 says be sure devices in the tree are still there.
  	 * For now let's assume the device didn't go crazy on resume,
@@ -2030,7 +2032,7 @@ static int finish_port_resume(struct usb_device *udev)
  * to it will be lost.  Using the USB_PERSIST facility, the device can be
  * made to appear as if it had not disconnected.
  *
- * This facility can be dangerous.  Although usb_reset_device() makes
+ * This facility can be dangerous.  Although usb_reset_and_verify_device() makes
  * every effort to insure that the same device is present after the
  * reset as before, it cannot provide a 100% guarantee.  Furthermore it's
  * quite possible for a device to remain unaltered but its media to be
@@ -2140,7 +2142,7 @@ int usb_port_resume(struct usb_device *udev)
 		hub_port_logical_disconnect(hub, port1);
 	} else if (udev->reset_resume) {
 		dev_dbg(&udev->dev, "reset-resume\n");
-		status = usb_reset_device(udev);
+		status = usb_reset_and_verify_device(udev);
 	}
 	return status;
 }
@@ -2321,7 +2323,7 @@ static int hub_set_address(struct usb_device *udev, int devnum)
  * Returns device in USB_STATE_ADDRESS, except on error.
  *
  * If this is called for an already-existing device (as part of
- * usb_reset_device), the caller must own the device lock.  For a
+ * usb_reset_and_verify_device), the caller must own the device lock.  For a
  * newly detected device that is not accessible through any global
  * pointers, it's not necessary to lock the device.
  */
@@ -2638,7 +2640,7 @@ hub_power_remaining (struct usb_hub *hub)
  * This routine is called when:
  * 	a port connection-change occurs;
  *	a port enable-change occurs (often caused by EMI);
- *	usb_reset_device() encounters changed descriptors (as from
+ *	usb_reset_and_verify_device() encounters changed descriptors (as from
  *		a firmware download)
  * caller already locked the hub
  */
@@ -2712,7 +2714,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 #endif
 
 		} else {
-			status = usb_reset_composite_device(udev);
+			status = usb_reset_device(udev);
 		}
 		usb_unlock_device(udev);
 
@@ -2940,7 +2942,7 @@ static void hub_events(void)
 			dev_dbg (hub_dev, "resetting for error %d\n",
 				hub->error);
 
-			ret = usb_reset_composite_device(hdev);
+			ret = usb_reset_device(hdev);
 			if (ret) {
 				dev_dbg (hub_dev,
 					"error resetting hub: %d\n", ret);
@@ -3233,12 +3235,12 @@ static int descriptors_changed(struct usb_device *udev,
 }
 
 /**
- * usb_reset_device - perform a USB port reset to reinitialize a device
+ * usb_reset_and_verify_device - perform a USB port reset to reinitialize a device
  * @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
  *
  * WARNING - don't use this routine to reset a composite device
  * (one with multiple interfaces owned by separate drivers)!
- * Use usb_reset_composite_device() instead.
+ * Use usb_reset_device() instead.
  *
  * Do a port reset, reassign the device's address, and establish its
  * former operating configuration.  If the reset fails, or the device's
@@ -3262,7 +3264,7 @@ static int descriptors_changed(struct usb_device *udev,
  * holding the device lock because these tasks should always call
  * usb_autopm_resume_device(), thereby preventing any unwanted autoresume.
  */
-int usb_reset_device(struct usb_device *udev)
+static int usb_reset_and_verify_device(struct usb_device *udev)
 {
 	struct usb_device		*parent_hdev = udev->parent;
 	struct usb_hub			*parent_hub;
@@ -3350,24 +3352,23 @@ int usb_reset_device(struct usb_device *udev)
 	hub_port_logical_disconnect(parent_hub, port1);
 	return -ENODEV;
 }
-EXPORT_SYMBOL_GPL(usb_reset_device);
 
 /**
- * usb_reset_composite_device - warn interface drivers and perform a USB port reset
+ * usb_reset_device - warn interface drivers and perform a USB port reset
  * @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
  *
  * Warns all drivers bound to registered interfaces (using their pre_reset
  * method), performs the port reset, and then lets the drivers know that
  * the reset is over (using their post_reset method).
  *
- * Return value is the same as for usb_reset_device().
+ * Return value is the same as for usb_reset_and_verify_device().
  *
  * The caller must own the device lock.  For example, it's safe to use
  * this from a driver probe() routine after downloading new firmware.
  * For calls that might not occur during probe(), drivers should lock
  * the device using usb_lock_device_for_reset().
  */
-int usb_reset_composite_device(struct usb_device *udev)
+int usb_reset_device(struct usb_device *udev)
 {
 	int ret;
 	int i;
@@ -3397,7 +3398,7 @@ int usb_reset_composite_device(struct usb_device *udev)
 		}
 	}
 
-	ret = usb_reset_device(udev);
+	ret = usb_reset_and_verify_device(udev);
 
 	if (config) {
 		for (i = config->desc.bNumInterfaces - 1; i >= 0; --i) {
@@ -3416,4 +3417,4 @@ int usb_reset_composite_device(struct usb_device *udev)
 	usb_autosuspend_device(udev);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(usb_reset_composite_device);
+EXPORT_SYMBOL_GPL(usb_reset_device);

drivers/usb/storage/transport.c

@@ -1172,8 +1172,8 @@ int usb_stor_port_reset(struct us_data *us)
 			result = -EIO;
 			US_DEBUGP("No reset during disconnect\n");
 		} else {
-			result = usb_reset_composite_device(us->pusb_dev);
-			US_DEBUGP("usb_reset_composite_device returns %d\n",
+			result = usb_reset_device(us->pusb_dev);
+			US_DEBUGP("usb_reset_device returns %d\n",
 					result);
 		}
 		if (rc_lock)

include/linux/usb.h

@@ -497,7 +497,6 @@ extern int usb_lock_device_for_reset(struct usb_device *udev,
 
 /* USB port reset for device reinitialization */
 extern int usb_reset_device(struct usb_device *dev);
-extern int usb_reset_composite_device(struct usb_device *dev);
 
 extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
 
@@ -957,9 +956,9 @@ struct usbdrv_wrap {
  * @resume: Called when the device is being resumed by the system.
  * @reset_resume: Called when the suspended device has been reset instead
  *	of being resumed.
- * @pre_reset: Called by usb_reset_composite_device() when the device
+ * @pre_reset: Called by usb_reset_device() when the device
  *	is about to be reset.
- * @post_reset: Called by usb_reset_composite_device() after the device
+ * @post_reset: Called by usb_reset_device() after the device
  *	has been reset
  * @id_table: USB drivers use ID table to support hotplugging.
  *	Export this with MODULE_DEVICE_TABLE(usb,...).  This must be set