power/reset: xgene: Use mdelay instead of jiffies based timeout

jiffies are not running at this stage of system shutdown, meaning an
error in the reset function would never be reported. Replace with mdelay().

Cc: Loc Ho <lho@apm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

drivers/power/reset/xgene-reboot.c

@@ -24,6 +24,7 @@
  * For system shutdown, this is board specify. If a board designer
  * implements GPIO shutdown, use the gpio-poweroff.c driver.
  */
+#include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
@@ -43,15 +44,12 @@ static struct xgene_reboot_context *xgene_restart_ctx;
 static void xgene_restart(enum reboot_mode mode, const char *cmd)
 {
 	struct xgene_reboot_context *ctx = xgene_restart_ctx;
-	unsigned long timeout;
 
 	/* Issue the reboot */
 	if (ctx)
 		writel(ctx->mask, ctx->csr);
 
-	timeout = jiffies + HZ;
-	while (time_before(jiffies, timeout))
-		cpu_relax();
+	mdelay(1000);
 
 	dev_emerg(ctx->dev, "Unable to restart system\n");
 }