[PATCH] ppc32: Update chestnut platform files

- Set up mtd partition from arch-specific platform file and remove
  obsoleted mtd map.

- Update default config file (now enables embedded ethernet driver).

- Make some minor fixups.

- General code cleanup.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/ppc/configs/chestnut_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc2
-# Tue Dec  7 16:02:09 2004
+# Linux kernel version: 2.6.11
+# Fri Mar 11 14:32:49 2005
 #
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_PPC=y
 CONFIG_PPC32=y
@@ -35,6 +36,7 @@ CONFIG_KOBJECT_UEVENT=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -44,6 +46,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -78,7 +81,9 @@ CONFIG_NOT_COHERENT_CACHE=y
 #
 # CONFIG_PPC_MULTIPLATFORM is not set
 # CONFIG_APUS is not set
+# CONFIG_KATANA is not set
 # CONFIG_WILLOW is not set
+# CONFIG_CPCI690 is not set
 # CONFIG_PCORE is not set
 # CONFIG_POWERPMC250 is not set
 CONFIG_CHESTNUT=y
@@ -91,6 +96,7 @@ CONFIG_CHESTNUT=y
 # CONFIG_PRPMC750 is not set
 # CONFIG_PRPMC800 is not set
 # CONFIG_SANDPOINT is not set
+# CONFIG_RADSTONE_PPC7D is not set
 # CONFIG_ADIR is not set
 # CONFIG_K2 is not set
 # CONFIG_PAL4 is not set
@@ -101,7 +107,9 @@ CONFIG_CHESTNUT=y
 # CONFIG_RPX8260 is not set
 # CONFIG_TQM8260 is not set
 # CONFIG_ADS8272 is not set
+# CONFIG_PQ2FADS is not set
 # CONFIG_LITE5200 is not set
+# CONFIG_MPC834x_SYS is not set
 CONFIG_MV64360=y
 CONFIG_MV64X60=y
 
@@ -127,6 +135,15 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
 
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PC-card bridges
+#
+
 #
 # Advanced setup
 #
@@ -154,6 +171,7 @@ CONFIG_BOOT_LOAD=0x00800000
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -181,6 +199,9 @@ CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_GEN_PROBE=y
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -198,13 +219,16 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_CHESTNUT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xfc000000
+CONFIG_MTD_PHYSMAP_LEN=0x02000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 
 #
 # Self-contained MTD device drivers
@@ -214,6 +238,7 @@ CONFIG_MTD_CHESTNUT=y
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
 
 #
 # Disk-On-Chip Device Drivers
@@ -244,11 +269,13 @@ CONFIG_MTD_CHESTNUT=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
@@ -262,6 +289,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -404,7 +432,6 @@ CONFIG_NET_PCI=y
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -429,6 +456,10 @@ CONFIG_E100=y
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+CONFIG_MV643XX_ETH=y
+CONFIG_MV643XX_ETH_0=y
+CONFIG_MV643XX_ETH_1=y
+# CONFIG_MV643XX_ETH_2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -484,14 +515,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
 #
 # Input Device Drivers
 #
@@ -501,6 +524,13 @@ CONFIG_SOUND_GAMEPORT=y
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
 #
 # Character devices
 #
@@ -520,6 +550,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MPSC is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -549,6 +580,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
 #
 # I2C support
 #
@@ -605,6 +641,16 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 # CONFIG_USB_GADGET is not set
 
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
 #
 # File systems
 #
@@ -614,6 +660,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -664,6 +714,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 # CONFIG_JFFS2_FS_NAND is not set
+# CONFIG_JFFS2_FS_NOR_ECC is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -686,7 +737,6 @@ CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -725,6 +775,7 @@ CONFIG_ZLIB_DEFLATE=y
 # Kernel hacking
 #
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_SERIAL_TEXT_DEBUG is not set
 
 #
@@ -737,3 +788,7 @@ CONFIG_ZLIB_DEFLATE=y
 # Cryptographic options
 #
 # CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#

arch/ppc/platforms/chestnut.h

@@ -24,11 +24,12 @@
  * implement at 0xf1000000 only at this time
  *
  *    0xfff00000-0xffffffff      - 8 Flash
+ *    0xffe00000-0xffefffff      - BOOT SRAM
  *    0xffd00000-0xffd00004      - CPLD
  *    0xffc00000-0xffc0000f      - UART
  *    0xffb00000-0xffb07fff      - FRAM
  *    0xffa00000-0xffafffff      - *** HOLE ***
- *    0xff900000-0xff9fffff      - MV64460 Integrated SRAM
+ *    0xff800000-0xff9fffff      - MV64460 Integrated SRAM
  *    0xfe000000-0xff8fffff      - *** HOLE ***
  *    0xfc000000-0xfdffffff      - 32bit Flash
  *    0xf1010000-0xfbffffff      - *** HOLE ***
@@ -49,9 +50,7 @@
 #define CHESTNUT_UART_SIZE_ACTUAL		16
 #define CHESTNUT_FRAM_BASE			0xffb00000
 #define CHESTNUT_FRAM_SIZE_ACTUAL		(32*1024)
-#define CHESTNUT_BRIDGE_REG_BASE		0xf1000000
-#define CHESTNUT_INTERNAL_SRAM_BASE		0xff900000
-#define CHESTNUT_INTERNAL_SRAM_SIZE_ACTUAL	(256*1024)
+#define CHESTNUT_INTERNAL_SRAM_BASE		0xff800000
 #define CHESTNUT_32BIT_BASE			0xfc000000
 #define CHESTNUT_32BIT_SIZE			(32*1024*1024)
 
@@ -65,14 +64,16 @@
 					CHESTNUT_UART_SIZE_ACTUAL)
 #define CHESTNUT_FRAM_SIZE		max(MV64360_WINDOW_SIZE_MIN, \
 					CHESTNUT_FRAM_SIZE_ACTUAL)
-#define CHESTNUT_INTERNAL_SRAM_SIZE	max(MV64360_WINDOW_SIZE_MIN, \
-					CHESTNUT_INTERNAL_SRAM_SIZE_ACTUAL)
 
 #define CHESTNUT_BUS_SPEED		200000000
 #define CHESTNUT_PIBS_DATABASE		0xf0000 /* from PIBS src code */
 
-#define MV64360_ETH_PORT_SERIAL_CONTROL_REG_PORT0 	0x243c
-#define MV64360_ETH_PORT_SERIAL_CONTROL_REG_PORT1 	0x283c
+#define	KATANA_ETH0_PHY_ADDR			12
+#define	KATANA_ETH1_PHY_ADDR			11
+#define	KATANA_ETH2_PHY_ADDR			4
+
+#define CHESTNUT_ETH_TX_QUEUE_SIZE		800
+#define CHESTNUT_ETH_RX_QUEUE_SIZE		400
 
 /*
  * PCI windows
@@ -89,17 +90,17 @@
 /*
  * Board-specific IRQ info
  */
-#define CHESTNUT_PCI_SLOT0_IRQ	64+31
-#define CHESTNUT_PCI_SLOT1_IRQ	64+30
-#define CHESTNUT_PCI_SLOT2_IRQ	64+29
-#define CHESTNUT_PCI_SLOT3_IRQ	64+28
+#define CHESTNUT_PCI_SLOT0_IRQ	(64 + 31)
+#define CHESTNUT_PCI_SLOT1_IRQ	(64 + 30)
+#define CHESTNUT_PCI_SLOT2_IRQ	(64 + 29)
+#define CHESTNUT_PCI_SLOT3_IRQ	(64 + 28)
 
 /* serial port definitions */
-#define CHESTNUT_UART0_IO_BASE  CHESTNUT_UART_BASE+8
+#define CHESTNUT_UART0_IO_BASE  (CHESTNUT_UART_BASE + 8)
 #define CHESTNUT_UART1_IO_BASE  CHESTNUT_UART_BASE
 
-#define UART0_INT           	64+25
-#define UART1_INT        	64+26
+#define UART0_INT           	(64 + 25)
+#define UART1_INT        	(64 + 26)
 
 #ifdef CONFIG_SERIAL_MANY_PORTS
 #define RS_TABLE_SIZE  64
@@ -108,7 +109,7 @@
 #endif
 
 /* Rate for the 3.6864 Mhz clock for the onboard serial chip */
-#define BASE_BAUD 		( 3686400 / 16 )
+#define BASE_BAUD 		(3686400 / 16)
 
 #ifdef CONFIG_SERIAL_DETECT_IRQ
 #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)

drivers/mtd/maps/Kconfig

@@ -405,14 +405,6 @@ config MTD_REDWOOD
 	  Redwood board. If you have one of these boards and would like to
 	  use the flash chips on it, say 'Y'.
 
-config MTD_CHESTNUT
-	tristate "CFI Flash devices mapped on IBM 750FX or IBM 750GX Eval Boards"
-	depends on MTD_CFI && PPC32 && CHESTNUT && MTD_PARTITIONS
-	help
-	  This enables access routines for the flash chips on the IBM
-	  750FX and 750GX Eval Boards. If you have one of these boards and
-	  would like to use the flash chips on it, say 'Y'
-
 config MTD_CSTM_MIPS_IXX
 	tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board"
 	depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS

drivers/mtd/maps/Makefile

@@ -54,7 +54,6 @@ obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
 obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
 obj-$(CONFIG_MTD_FORTUNET)	+= fortunet.o
 obj-$(CONFIG_MTD_REDWOOD)	+= redwood.o
-obj-$(CONFIG_MTD_CHESTNUT)	+= chestnut.o
 obj-$(CONFIG_MTD_UCLINUX)	+= uclinux.o
 obj-$(CONFIG_MTD_NETtel)	+= nettel.o
 obj-$(CONFIG_MTD_SCB2_FLASH)	+= scb2_flash.o

drivers/mtd/maps/chestnut.c

-/*
- * drivers/mtd/maps/chestnut.c
- *
- * $Id: chestnut.c,v 1.1 2005/01/05 16:59:50 dwmw2 Exp $
- *
- * Flash map driver for IBM Chestnut (750FXGX Eval)
- *
- * Chose not to enable 8 bit flash as it contains the firmware and board
- * info.  Thus only the 32bit flash is supported.
- *
- * Author: <source@mvista.com>
- *
- * 2004 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <platforms/chestnut.h>
-
-static struct map_info chestnut32_map = {
-   	.name 		= "User FS",
-   	.size 		= CHESTNUT_32BIT_SIZE,
-   	.bankwidth 	= 4,
-	.phys 		= CHESTNUT_32BIT_BASE,
-};
-
-static struct mtd_partition chestnut32_partitions[] = {
-	{
-		.name 	= "User FS",
-		.offset	= 0,
-		.size	= CHESTNUT_32BIT_SIZE,
-	}
-};
-
-static struct mtd_info *flash32;
-
-int __init init_chestnut(void)
-{
-	/* 32-bit FLASH */
-
-   	chestnut32_map.virt = ioremap(chestnut32_map.phys, chestnut32_map.size);
-
-   	if (!chestnut32_map.virt) {
-      		printk(KERN_NOTICE "Failed to ioremap 32-bit flash\n");
-		return -EIO;
-   	}
-
-	simple_map_init(&chestnut32_map);
-
-   	flash32 = do_map_probe("cfi_probe", &chestnut32_map);
-   	if (flash32) {
-   		flash32->owner = THIS_MODULE;
-   		add_mtd_partitions(flash32, chestnut32_partitions,
-					ARRAY_SIZE(chestnut32_partitions));
-   	} else {
-      		printk(KERN_NOTICE "map probe failed for 32-bit flash\n");
-		return -ENXIO;
-	}
-
-   	return 0;
-}
-
-static void __exit
-cleanup_chestnut(void)
-{
-   	if (flash32) {
-      		del_mtd_partitions(flash32);
-		map_destroy(flash32);
-   	}
-
-   	if (chestnut32_map.virt) {
-      		iounmap((void *)chestnut32_map.virt);
-	  	chestnut32_map.virt = 0;
-   	}
-}
-
-module_init(init_chestnut);
-module_exit(cleanup_chestnut);
-
-MODULE_DESCRIPTION("MTD map and partitions for IBM Chestnut (750fxgx Eval)");
-MODULE_AUTHOR("<source@mvista.com>");
-MODULE_LICENSE("GPL");