fsl/fman: enable FMan Keygen

Add support for the FMan Keygen with a hardcoded scheme to spread
incoming traffic on a FQ range based on source and destination IPs
and ports.
Signed-off-by: Iordache Florinel <florinel.iordache@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/freescale/fman/Makefile

@@ -4,6 +4,6 @@ obj-$(CONFIG_FSL_FMAN) += fsl_fman.o
 obj-$(CONFIG_FSL_FMAN) += fsl_fman_port.o
 obj-$(CONFIG_FSL_FMAN) += fsl_mac.o
 
-fsl_fman-objs	:= fman_muram.o fman.o fman_sp.o
+fsl_fman-objs	:= fman_muram.o fman.o fman_sp.o fman_keygen.o
 fsl_fman_port-objs := fman_port.o
 fsl_mac-objs:= mac.o fman_dtsec.o fman_memac.o fman_tgec.o

drivers/net/ethernet/freescale/fman/fman.c

@@ -45,6 +45,7 @@
 
 #include "fman.h"
 #include "fman_muram.h"
+#include "fman_keygen.h"
 
 /* General defines */
 #define FMAN_LIODN_TBL			64	/* size of LIODN table */
@@ -56,6 +57,7 @@
 /* Modules registers offsets */
 #define BMI_OFFSET		0x00080000
 #define QMI_OFFSET		0x00080400
+#define KG_OFFSET		0x000C1000
 #define DMA_OFFSET		0x000C2000
 #define FPM_OFFSET		0x000C3000
 #define IMEM_OFFSET		0x000C4000
@@ -1737,6 +1739,7 @@ static int fman_config(struct fman *fman)
 	fman->qmi_regs = base_addr + QMI_OFFSET;
 	fman->dma_regs = base_addr + DMA_OFFSET;
 	fman->hwp_regs = base_addr + HWP_OFFSET;
+	fman->kg_regs = base_addr + KG_OFFSET;
 	fman->base_addr = base_addr;
 
 	spin_lock_init(&fman->spinlock);
@@ -2009,6 +2012,11 @@ static int fman_init(struct fman *fman)
 	/* Init HW Parser */
 	hwp_init(fman->hwp_regs);
 
+	/* Init KeyGen */
+	fman->keygen = keygen_init(fman->kg_regs);
+	if (!fman->keygen)
+		return -EINVAL;
+
 	err = enable(fman, cfg);
 	if (err != 0)
 		return err;

drivers/net/ethernet/freescale/fman/fman.h

@@ -328,6 +328,7 @@ struct fman {
 	struct fman_qmi_regs __iomem *qmi_regs;
 	struct fman_dma_regs __iomem *dma_regs;
 	struct fman_hwp_regs __iomem *hwp_regs;
+	struct fman_kg_regs __iomem *kg_regs;
 	fman_exceptions_cb *exception_cb;
 	fman_bus_error_cb *bus_error_cb;
 	/* Spinlock for FMan use */
@@ -336,6 +337,7 @@ struct fman {
 
 	struct fman_cfg *cfg;
 	struct muram_info *muram;
+	struct fman_keygen *keygen;
 	/* cam section in muram */
 	unsigned long cam_offset;
 	size_t cam_size;

drivers/net/ethernet/freescale/fman/fman_keygen.h

+/*
+ * Copyright 2017 NXP
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of NXP nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NXP ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NXP BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __KEYGEN_H
+#define __KEYGEN_H
+
+#include <linux/io.h>
+
+struct fman_keygen;
+struct fman_kg_regs;
+
+struct fman_keygen *keygen_init(struct fman_kg_regs __iomem *keygen_regs);
+
+int keygen_port_hashing_init(struct fman_keygen *keygen, u8 hw_port_id,
+			     u32 hash_base_fqid, u32 hash_size);
+
+#endif /* __KEYGEN_H */

drivers/net/ethernet/freescale/fman/fman_port.c

@@ -44,6 +44,7 @@
 #include "fman.h"
 #include "fman_port.h"
 #include "fman_sp.h"
+#include "fman_keygen.h"
 
 /* Queue ID */
 #define DFLT_FQ_ID		0x00FFFFFF
@@ -184,6 +185,7 @@
 #define NIA_ENG_QMI_ENQ					0x00540000
 #define NIA_ENG_QMI_DEQ					0x00580000
 #define NIA_ENG_HWP					0x00440000
+#define NIA_ENG_HWK					0x00480000
 #define NIA_BMI_AC_ENQ_FRAME				0x00000002
 #define NIA_BMI_AC_TX_RELEASE				0x000002C0
 #define NIA_BMI_AC_RELEASE				0x000000C0
@@ -394,6 +396,8 @@ struct fman_port_bpools {
 struct fman_port_cfg {
 	u32 dflt_fqid;
 	u32 err_fqid;
+	u32 pcd_base_fqid;
+	u32 pcd_fqs_count;
 	u8 deq_sp;
 	bool deq_high_priority;
 	enum fman_port_deq_type deq_type;
@@ -1271,6 +1275,10 @@ static void set_rx_dflt_cfg(struct fman_port *port,
 		port_params->specific_params.rx_params.err_fqid;
 	port->cfg->dflt_fqid =
 		port_params->specific_params.rx_params.dflt_fqid;
+	port->cfg->pcd_base_fqid =
+		port_params->specific_params.rx_params.pcd_base_fqid;
+	port->cfg->pcd_fqs_count =
+		port_params->specific_params.rx_params.pcd_fqs_count;
 }
 
 static void set_tx_dflt_cfg(struct fman_port *port,
@@ -1397,6 +1405,24 @@ int fman_port_config(struct fman_port *port, struct fman_port_params *params)
 }
 EXPORT_SYMBOL(fman_port_config);
 
+/**
+ * fman_port_use_kg_hash
+ * port:        A pointer to a FM Port module.
+ * Sets the HW KeyGen or the BMI as HW Parser next engine, enabling
+ * or bypassing the KeyGen hashing of Rx traffic
+ */
+void fman_port_use_kg_hash(struct fman_port *port, bool enable)
+{
+	if (enable)
+		/* After the Parser frames go to KeyGen */
+		iowrite32be(NIA_ENG_HWK, &port->bmi_regs->rx.fmbm_rfpne);
+	else
+		/* After the Parser frames go to BMI */
+		iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME,
+			    &port->bmi_regs->rx.fmbm_rfpne);
+}
+EXPORT_SYMBOL(fman_port_use_kg_hash);
+
 /**
  * fman_port_init
  * port:	A pointer to a FM Port module.
@@ -1407,9 +1433,10 @@ EXPORT_SYMBOL(fman_port_config);
  */
 int fman_port_init(struct fman_port *port)
 {
+	struct fman_port_init_params params;
+	struct fman_keygen *keygen;
 	struct fman_port_cfg *cfg;
 	int err;
-	struct fman_port_init_params params;
 
 	if (is_init_done(port->cfg))
 		return -EINVAL;
@@ -1472,6 +1499,17 @@ int fman_port_init(struct fman_port *port)
 	if (err)
 		return err;
 
+	if (port->cfg->pcd_fqs_count) {
+		keygen = port->dts_params.fman->keygen;
+		err = keygen_port_hashing_init(keygen, port->port_id,
+					       port->cfg->pcd_base_fqid,
+					       port->cfg->pcd_fqs_count);
+		if (err)
+			return err;
+
+		fman_port_use_kg_hash(port, true);
+	}
+
 	kfree(port->cfg);
 	port->cfg = NULL;
 

drivers/net/ethernet/freescale/fman/fman_port.h

@@ -100,6 +100,9 @@ struct fman_port;
 struct fman_port_rx_params {
 	u32 err_fqid;			/* Error Queue Id. */
 	u32 dflt_fqid;			/* Default Queue Id. */
+	u32 pcd_base_fqid;		/* PCD base Queue Id. */
+	u32 pcd_fqs_count;		/* Number of PCD FQs. */
+
 	/* Which external buffer pools are used
 	 * (up to FMAN_PORT_MAX_EXT_POOLS_NUM), and their sizes.
 	 */
@@ -134,6 +137,8 @@ struct fman_port_params {
 
 int fman_port_config(struct fman_port *port, struct fman_port_params *params);
 
+void fman_port_use_kg_hash(struct fman_port *port, bool enable);
+
 int fman_port_init(struct fman_port *port);
 
 int fman_port_cfg_buf_prefix_content(struct fman_port *port,