Commit 74ded659 authored by Alexander Shiyan's avatar Alexander Shiyan Committed by Shawn Guo

ARM: dts: imx27-phytec-phycore-som: Add USBOTG node

This patch adds USBOTG devicetree node of Phytec PCM038 module.
Signed-off-by: default avatarAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 9089ce52
...@@ -250,6 +250,23 @@ MX27_PAD_NFRE_B__NFRE_B 0x0 ...@@ -250,6 +250,23 @@ MX27_PAD_NFRE_B__NFRE_B 0x0
MX27_PAD_NFWE_B__NFWE_B 0x0 MX27_PAD_NFWE_B__NFWE_B 0x0
>; >;
}; };
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
>;
};
}; };
}; };
...@@ -262,6 +279,19 @@ &nfc { ...@@ -262,6 +279,19 @@ &nfc {
status = "okay"; status = "okay";
}; };
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
dr_mode = "otg";
phy_type = "ulpi";
vbus-supply = <&sw3_reg>;
status = "okay";
};
&usbphy0 {
vcc-supply = <&sw3_reg>;
};
&weim { &weim {
status = "okay"; status = "okay";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment