Commit 74e1f252 authored by Martin Blumenstingl's avatar Martin Blumenstingl Committed by Neil Armstrong

clk: meson: meson8b: add the GPU clock tree

Add the GPU clock tree on Meson8, Meson8b and Meson8m2.

The GPU clock tree on Meson8b and Meson8m2 is almost identical to the
one one GXBB:
- there's a glitch-free mux at HHI_MALI_CLK_CNTL[31]
- there are two identical parents for this mux: mali_0 and mali_1, each
  with a gate, divider and mux
- the parents of mali_0_sel and mali_1_sel are identical to GXBB except
  there's no GP0_PLL on these 32-bit SoCs

Meson8 is different because it does not have the glitch-free mux.
Instead if only has the mali_0 clock tree. The parents of mali_0_sel are
identical to the ones on Meson8b and Meson8m2.
Signed-off-by: default avatarMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181208171247.22238-4-martin.blumenstingl@googlemail.com
parent cce433e6
...@@ -1573,6 +1573,135 @@ static struct clk_regmap meson8b_hdmi_sys = { ...@@ -1573,6 +1573,135 @@ static struct clk_regmap meson8b_hdmi_sys = {
}, },
}; };
/*
* The MALI IP is clocked by two identical clocks (mali_0 and mali_1)
* muxed by a glitch-free switch on Meson8b and Meson8m2. Meson8 only
* has mali_0 and no glitch-free mux.
*/
static const char * const meson8b_mali_0_1_parent_names[] = {
"xtal", "mpll2", "mpll1", "fclk_div7", "fclk_div4", "fclk_div3",
"fclk_div5"
};
static u32 meson8b_mali_0_1_mux_table[] = { 0, 2, 3, 4, 5, 6, 7 };
static struct clk_regmap meson8b_mali_0_sel = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_MALI_CLK_CNTL,
.mask = 0x7,
.shift = 9,
.table = meson8b_mali_0_1_mux_table,
},
.hw.init = &(struct clk_init_data){
.name = "mali_0_sel",
.ops = &clk_regmap_mux_ops,
.parent_names = meson8b_mali_0_1_parent_names,
.num_parents = ARRAY_SIZE(meson8b_mali_0_1_parent_names),
/*
* Don't propagate rate changes up because the only changeable
* parents are mpll1 and mpll2 but we need those for audio and
* RGMII (Ethernet). We don't want to change the audio or
* Ethernet clocks when setting the GPU frequency.
*/
.flags = 0,
},
};
static struct clk_regmap meson8b_mali_0_div = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_MALI_CLK_CNTL,
.shift = 0,
.width = 7,
},
.hw.init = &(struct clk_init_data){
.name = "mali_0_div",
.ops = &clk_regmap_divider_ops,
.parent_names = (const char *[]){ "mali_0_sel" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap meson8b_mali_0 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MALI_CLK_CNTL,
.bit_idx = 8,
},
.hw.init = &(struct clk_init_data){
.name = "mali_0",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "mali_0_div" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap meson8b_mali_1_sel = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_MALI_CLK_CNTL,
.mask = 0x7,
.shift = 25,
.table = meson8b_mali_0_1_mux_table,
},
.hw.init = &(struct clk_init_data){
.name = "mali_1_sel",
.ops = &clk_regmap_mux_ops,
.parent_names = meson8b_mali_0_1_parent_names,
.num_parents = ARRAY_SIZE(meson8b_mali_0_1_parent_names),
/*
* Don't propagate rate changes up because the only changeable
* parents are mpll1 and mpll2 but we need those for audio and
* RGMII (Ethernet). We don't want to change the audio or
* Ethernet clocks when setting the GPU frequency.
*/
.flags = 0,
},
};
static struct clk_regmap meson8b_mali_1_div = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_MALI_CLK_CNTL,
.shift = 16,
.width = 7,
},
.hw.init = &(struct clk_init_data){
.name = "mali_1_div",
.ops = &clk_regmap_divider_ops,
.parent_names = (const char *[]){ "mali_1_sel" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap meson8b_mali_1 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MALI_CLK_CNTL,
.bit_idx = 24,
},
.hw.init = &(struct clk_init_data){
.name = "mali_1",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "mali_1_div" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap meson8b_mali = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_MALI_CLK_CNTL,
.mask = 1,
.shift = 31,
},
.hw.init = &(struct clk_init_data){
.name = "mali",
.ops = &clk_regmap_mux_ops,
.parent_names = (const char *[]){ "mali_0", "mali_1" },
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
};
/* Everything Else (EE) domain gates */ /* Everything Else (EE) domain gates */
static MESON_GATE(meson8b_ddr, HHI_GCLK_MPEG0, 0); static MESON_GATE(meson8b_ddr, HHI_GCLK_MPEG0, 0);
...@@ -1833,6 +1962,9 @@ static struct clk_hw_onecell_data meson8_hw_onecell_data = { ...@@ -1833,6 +1962,9 @@ static struct clk_hw_onecell_data meson8_hw_onecell_data = {
[CLKID_HDMI_SYS_SEL] = &meson8b_hdmi_sys_sel.hw, [CLKID_HDMI_SYS_SEL] = &meson8b_hdmi_sys_sel.hw,
[CLKID_HDMI_SYS_DIV] = &meson8b_hdmi_sys_div.hw, [CLKID_HDMI_SYS_DIV] = &meson8b_hdmi_sys_div.hw,
[CLKID_HDMI_SYS] = &meson8b_hdmi_sys.hw, [CLKID_HDMI_SYS] = &meson8b_hdmi_sys.hw,
[CLKID_MALI_0_SEL] = &meson8b_mali_0_sel.hw,
[CLKID_MALI_0_DIV] = &meson8b_mali_0_div.hw,
[CLKID_MALI] = &meson8b_mali_0.hw,
[CLK_NR_CLKS] = NULL, [CLK_NR_CLKS] = NULL,
}, },
.num = CLK_NR_CLKS, .num = CLK_NR_CLKS,
...@@ -2012,6 +2144,13 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = { ...@@ -2012,6 +2144,13 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
[CLKID_HDMI_SYS_SEL] = &meson8b_hdmi_sys_sel.hw, [CLKID_HDMI_SYS_SEL] = &meson8b_hdmi_sys_sel.hw,
[CLKID_HDMI_SYS_DIV] = &meson8b_hdmi_sys_div.hw, [CLKID_HDMI_SYS_DIV] = &meson8b_hdmi_sys_div.hw,
[CLKID_HDMI_SYS] = &meson8b_hdmi_sys.hw, [CLKID_HDMI_SYS] = &meson8b_hdmi_sys.hw,
[CLKID_MALI_0_SEL] = &meson8b_mali_0_sel.hw,
[CLKID_MALI_0_DIV] = &meson8b_mali_0_div.hw,
[CLKID_MALI_0] = &meson8b_mali_0.hw,
[CLKID_MALI_1_SEL] = &meson8b_mali_1_sel.hw,
[CLKID_MALI_1_DIV] = &meson8b_mali_1_div.hw,
[CLKID_MALI_1] = &meson8b_mali_1.hw,
[CLKID_MALI] = &meson8b_mali.hw,
[CLK_NR_CLKS] = NULL, [CLK_NR_CLKS] = NULL,
}, },
.num = CLK_NR_CLKS, .num = CLK_NR_CLKS,
...@@ -2167,6 +2306,13 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = { ...@@ -2167,6 +2306,13 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
&meson8b_hdmi_sys_sel, &meson8b_hdmi_sys_sel,
&meson8b_hdmi_sys_div, &meson8b_hdmi_sys_div,
&meson8b_hdmi_sys, &meson8b_hdmi_sys,
&meson8b_mali_0_sel,
&meson8b_mali_0_div,
&meson8b_mali_0,
&meson8b_mali_1_sel,
&meson8b_mali_1_div,
&meson8b_mali_1,
&meson8b_mali,
}; };
static const struct meson8b_clk_reset_line { static const struct meson8b_clk_reset_line {
......
...@@ -33,6 +33,7 @@ ...@@ -33,6 +33,7 @@
#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */ #define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */
#define HHI_VID_DIVIDER_CNTL 0x198 /* 0x66 offset in data sheet */ #define HHI_VID_DIVIDER_CNTL 0x198 /* 0x66 offset in data sheet */
#define HHI_SYS_CPU_CLK_CNTL0 0x19c /* 0x67 offset in data sheet */ #define HHI_SYS_CPU_CLK_CNTL0 0x19c /* 0x67 offset in data sheet */
#define HHI_MALI_CLK_CNTL 0x1b0 /* 0x6c offset in data sheet */
#define HHI_HDMI_CLK_CNTL 0x1cc /* 0x73 offset in data sheet */ #define HHI_HDMI_CLK_CNTL 0x1cc /* 0x73 offset in data sheet */
#define HHI_NAND_CLK_CNTL 0x25c /* 0x97 offset in data sheet */ #define HHI_NAND_CLK_CNTL 0x25c /* 0x97 offset in data sheet */
#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */ #define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */
...@@ -139,8 +140,14 @@ ...@@ -139,8 +140,14 @@
#define CLKID_HDMI_SYS_SEL 172 #define CLKID_HDMI_SYS_SEL 172
#define CLKID_HDMI_SYS_DIV 173 #define CLKID_HDMI_SYS_DIV 173
#define CLKID_HDMI_SYS 174 #define CLKID_HDMI_SYS 174
#define CLKID_MALI_0_SEL 175
#define CLKID_MALI_0_DIV 176
#define CLKID_MALI_0 177
#define CLKID_MALI_1_SEL 178
#define CLKID_MALI_1_DIV 179
#define CLKID_MALI_1 180
#define CLK_NR_CLKS 175 #define CLK_NR_CLKS 181
/* /*
* include the CLKID and RESETID that have * include the CLKID and RESETID that have
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment