Commit 7515caf1 authored by Andrew Morton's avatar Andrew Morton Committed by David S. Miller

[CRYPTO]: aes-586-asm: small optimizations

From: Denis Vlasenko <vda@port.imtp.ilyichevsk.odessa.ua>

- recode back-to-back fwd_rnd() pairs to avoid two register moves.

- ditto for inv_rnd().

- optimize out lea 0(%ebp),%ebp

- remove two stray insns

# size aes-i586-asm.o.org aes-i586-asm.o
   text    data     bss     dec     hex filename
   5971       0       0    5971    1753 aes-i586-asm.o.org
   5905       0       0    5905    1711 aes-i586-asm.o

Overall, patch does not add and does not modify any insns, only removes a
handful of them.  However, speed difference is way below noise level.

Run-tested with tcrypt module.
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 45b5913e
......@@ -104,7 +104,8 @@
xor table+3*tlen(,%idx,4),%a4;
// initialise output registers from the key schedule
// NB: original a3 is in idx on exit
// NB1: original value of a3 is in idx on exit
// NB2: original values of a1,a2,a4 aren't used
#define do_fcol(table, a1,a2,a3,a4, idx, tmp, sched) \
mov 0 sched,%a1; \
movzx %l(idx),%tmp; \
......@@ -122,7 +123,8 @@
xor table+2*tlen(,%tmp,4),%a3;
// initialise output registers from the key schedule
// NB: original a3 is in idx on exit
// NB1: original value of a3 is in idx on exit
// NB2: original values of a1,a2,a4 aren't used
#define do_icol(table, a1,a2,a3,a4, idx, tmp, sched) \
mov 0 sched,%a1; \
movzx %l(idx),%tmp; \
......@@ -147,41 +149,75 @@
#define restore(a1, a2) \
mov 4*a2(%esp),%a1
// This macro performs a forward encryption cycle. It is entered with
// the first previous round column values in r0, r1, r4 and r5 and
// exits with the final values in the same registers, using stack
// These macros perform a forward encryption cycle. They are entered with
// the first previous round column values in r0,r1,r4,r5 and
// exit with the final values in the same registers, using stack
// for temporary storage.
// round column values
// on entry: r0,r1,r4,r5
// on exit: r2,r1,r4,r5
#define fwd_rnd1(arg, table) \
save (0,r1); \
save (1,r5); \
\
/* compute new column values */ \
do_fcol(table, r2,r5,r4,r1, r0,r3, arg); /* idx=r0 */ \
do_col (table, r4,r1,r2,r5, r0,r3); /* idx=r4 */ \
restore(r0,0); \
do_col (table, r1,r2,r5,r4, r0,r3); /* idx=r1 */ \
restore(r0,1); \
do_col (table, r5,r4,r1,r2, r0,r3); /* idx=r5 */
// round column values
// on entry: r2,r1,r4,r5
// on exit: r0,r1,r4,r5
#define fwd_rnd2(arg, table) \
save (0,r1); \
save (1,r5); \
\
/* compute new column values */ \
do_fcol(table, r0,r5,r4,r1, r2,r3, arg); /* idx=r2 */ \
do_col (table, r4,r1,r0,r5, r2,r3); /* idx=r4 */ \
restore(r2,0); \
do_col (table, r1,r0,r5,r4, r2,r3); /* idx=r1 */ \
restore(r2,1); \
do_col (table, r5,r4,r1,r0, r2,r3); /* idx=r5 */
// These macros performs an inverse encryption cycle. They are entered with
// the first previous round column values in r0,r1,r4,r5 and
// exit with the final values in the same registers, using stack
// for temporary storage
#define fwd_rnd(arg, table) \
mov %r0,%r2; \
save (0,r1); \
save (1,r5); \
\
/* compute new column values */ \
do_fcol(table, r0,r5,r4,r1, r2,r3, arg); \
do_col (table, r4,r1,r0,r5, r2,r3); \
restore(r2,0); \
do_col (table, r1,r0,r5,r4, r2,r3); \
restore(r2,1); \
do_col (table, r5,r4,r1,r0, r2,r3);
// This macro performs an inverse encryption cycle. It is entered with
// the first previous round column values in r0, r1, r4 and r5 and
// exits with the final values in the same registers, using stack
// for temporary storage
#define inv_rnd(arg, table) \
mov %r0,%r2; \
save (0,r1); \
save (1,r5); \
\
/* compute new column values */ \
do_icol(table, r0,r1,r4,r5, r2,r3, arg); \
do_col (table, r4,r5,r0,r1, r2,r3); \
restore(r2,0); \
do_col (table, r1,r4,r5,r0, r2,r3); \
restore(r2,1); \
do_col (table, r5,r0,r1,r4, r2,r3);
// round column values
// on entry: r0,r1,r4,r5
// on exit: r2,r1,r4,r5
#define inv_rnd1(arg, table) \
save (0,r1); \
save (1,r5); \
\
/* compute new column values */ \
do_icol(table, r2,r1,r4,r5, r0,r3, arg); /* idx=r0 */ \
do_col (table, r4,r5,r2,r1, r0,r3); /* idx=r4 */ \
restore(r0,0); \
do_col (table, r1,r4,r5,r2, r0,r3); /* idx=r1 */ \
restore(r0,1); \
do_col (table, r5,r2,r1,r4, r0,r3); /* idx=r5 */
// round column values
// on entry: r2,r1,r4,r5
// on exit: r0,r1,r4,r5
#define inv_rnd2(arg, table) \
save (0,r1); \
save (1,r5); \
\
/* compute new column values */ \
do_icol(table, r0,r1,r4,r5, r2,r3, arg); /* idx=r2 */ \
do_col (table, r4,r5,r0,r1, r2,r3); /* idx=r4 */ \
restore(r2,0); \
do_col (table, r1,r4,r5,r0, r2,r3); /* idx=r1 */ \
restore(r2,1); \
do_col (table, r5,r0,r1,r4, r2,r3); /* idx=r5 */
// AES (Rijndael) Encryption Subroutine
......@@ -195,7 +231,6 @@
aes_enc_blk:
push %ebp
mov ctx(%esp),%ebp // pointer to context
xor %eax,%eax
// CAUTION: the order and the values used in these assigns
// rely on the register mappings
......@@ -205,7 +240,9 @@ aes_enc_blk:
push %esi
mov nrnd(%ebp),%r3 // number of rounds
push %edi
#if ekey != 0
lea ekey(%ebp),%ebp // key pointer
#endif
// input four columns and xor in first round key
......@@ -227,20 +264,20 @@ aes_enc_blk:
je 3f // 12 rounds for 128-bit key
add $32,%ebp
2: fwd_rnd( -64(%ebp) ,ft_tab) // 14 rounds for 128-bit key
fwd_rnd( -48(%ebp) ,ft_tab)
3: fwd_rnd( -32(%ebp) ,ft_tab) // 12 rounds for 128-bit key
fwd_rnd( -16(%ebp) ,ft_tab)
4: fwd_rnd( (%ebp) ,ft_tab) // 10 rounds for 128-bit key
fwd_rnd( +16(%ebp) ,ft_tab)
fwd_rnd( +32(%ebp) ,ft_tab)
fwd_rnd( +48(%ebp) ,ft_tab)
fwd_rnd( +64(%ebp) ,ft_tab)
fwd_rnd( +80(%ebp) ,ft_tab)
fwd_rnd( +96(%ebp) ,ft_tab)
fwd_rnd(+112(%ebp) ,ft_tab)
fwd_rnd(+128(%ebp) ,ft_tab)
fwd_rnd(+144(%ebp) ,fl_tab) // last round uses a different table
2: fwd_rnd1( -64(%ebp) ,ft_tab) // 14 rounds for 128-bit key
fwd_rnd2( -48(%ebp) ,ft_tab)
3: fwd_rnd1( -32(%ebp) ,ft_tab) // 12 rounds for 128-bit key
fwd_rnd2( -16(%ebp) ,ft_tab)
4: fwd_rnd1( (%ebp) ,ft_tab) // 10 rounds for 128-bit key
fwd_rnd2( +16(%ebp) ,ft_tab)
fwd_rnd1( +32(%ebp) ,ft_tab)
fwd_rnd2( +48(%ebp) ,ft_tab)
fwd_rnd1( +64(%ebp) ,ft_tab)
fwd_rnd2( +80(%ebp) ,ft_tab)
fwd_rnd1( +96(%ebp) ,ft_tab)
fwd_rnd2(+112(%ebp) ,ft_tab)
fwd_rnd1(+128(%ebp) ,ft_tab)
fwd_rnd2(+144(%ebp) ,fl_tab) // last round uses a different table
// move final values to the output array. CAUTION: the
// order of these assigns rely on the register mappings
......@@ -270,7 +307,6 @@ aes_enc_blk:
aes_dec_blk:
push %ebp
mov ctx(%esp),%ebp // pointer to context
xor %eax,%eax
// CAUTION: the order and the values used in these assigns
// rely on the register mappings
......@@ -280,7 +316,9 @@ aes_dec_blk:
push %esi
mov nrnd(%ebp),%r3 // number of rounds
push %edi
#if dkey != 0
lea dkey(%ebp),%ebp // key pointer
#endif
mov %r3,%r0
shl $4,%r0
add %r0,%ebp
......@@ -305,20 +343,20 @@ aes_dec_blk:
je 3f // 12 rounds for 128-bit key
sub $32,%ebp
2: inv_rnd( +64(%ebp), it_tab) // 14 rounds for 128-bit key
inv_rnd( +48(%ebp), it_tab)
3: inv_rnd( +32(%ebp), it_tab) // 12 rounds for 128-bit key
inv_rnd( +16(%ebp), it_tab)
4: inv_rnd( (%ebp), it_tab) // 10 rounds for 128-bit key
inv_rnd( -16(%ebp), it_tab)
inv_rnd( -32(%ebp), it_tab)
inv_rnd( -48(%ebp), it_tab)
inv_rnd( -64(%ebp), it_tab)
inv_rnd( -80(%ebp), it_tab)
inv_rnd( -96(%ebp), it_tab)
inv_rnd(-112(%ebp), it_tab)
inv_rnd(-128(%ebp), it_tab)
inv_rnd(-144(%ebp), il_tab) // last round uses a different table
2: inv_rnd1( +64(%ebp), it_tab) // 14 rounds for 128-bit key
inv_rnd2( +48(%ebp), it_tab)
3: inv_rnd1( +32(%ebp), it_tab) // 12 rounds for 128-bit key
inv_rnd2( +16(%ebp), it_tab)
4: inv_rnd1( (%ebp), it_tab) // 10 rounds for 128-bit key
inv_rnd2( -16(%ebp), it_tab)
inv_rnd1( -32(%ebp), it_tab)
inv_rnd2( -48(%ebp), it_tab)
inv_rnd1( -64(%ebp), it_tab)
inv_rnd2( -80(%ebp), it_tab)
inv_rnd1( -96(%ebp), it_tab)
inv_rnd2(-112(%ebp), it_tab)
inv_rnd1(-128(%ebp), it_tab)
inv_rnd2(-144(%ebp), il_tab) // last round uses a different table
// move final values to the output array. CAUTION: the
// order of these assigns rely on the register mappings
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment