Commit 754e4382 authored by Pavel Skripkin's avatar Pavel Skripkin Committed by Stefan Schmidt

ieee802154: atusb: fix uninit value in atusb_set_extended_addr

Alexander reported a use of uninitialized value in
atusb_set_extended_addr(), that is caused by reading 0 bytes via
usb_control_msg().

Fix it by validating if the number of bytes transferred is actually
correct, since usb_control_msg() may read less bytes, than was requested
by caller.

Fail log:

BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
 ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
 atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
 atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
 usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396

Fixes: 7490b008 ("ieee802154: add support for atusb transceiver")
Reported-by: default avatarAlexander Potapenko <glider@google.com>
Acked-by: default avatarAlexander Aring <aahringo@redhat.com>
Signed-off-by: default avatarPavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20220104182806.7188-1-paskripkin@gmail.comSigned-off-by: default avatarStefan Schmidt <stefan@datenfreihafen.org>
parent 7d18a078
......@@ -93,7 +93,9 @@ static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
ret = usb_control_msg(usb_dev, pipe, request, requesttype,
value, index, data, size, timeout);
if (ret < 0) {
if (ret < size) {
ret = ret < 0 ? ret : -ENODATA;
atusb->err = ret;
dev_err(&usb_dev->dev,
"%s: req 0x%02x val 0x%x idx 0x%x, error %d\n",
......@@ -861,9 +863,9 @@ static int atusb_get_and_show_build(struct atusb *atusb)
if (!build)
return -ENOMEM;
ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
ATUSB_BUILD, ATUSB_REQ_FROM_DEV, 0, 0,
build, ATUSB_BUILD_SIZE, 1000);
/* We cannot call atusb_control_msg() here, since this request may read various length data */
ret = usb_control_msg(atusb->usb_dev, usb_rcvctrlpipe(usb_dev, 0), ATUSB_BUILD,
ATUSB_REQ_FROM_DEV, 0, 0, build, ATUSB_BUILD_SIZE, 1000);
if (ret >= 0) {
build[ret] = 0;
dev_info(&usb_dev->dev, "Firmware: build %s\n", build);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment