Commit 75ad2ab2 authored by Leela Krishna Amudala's avatar Leela Krishna Amudala Committed by Kukjin Kim

ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling

A common macro v7_exit_coherency_flush available which does the below
tasks in the seqeunce.
-clearing C bit
-clearing L1 cache
-exit SMP
-instruction and data synchronization

So removing the local functions which does the same thing and use the
macro instead.
Signed-off-by: default avatarLeela Krishna Amudala <leela.krishna@linaro.org>
Acked-by: default avatarNicolas Pitre <nico@linaro.org>
[cw00.choi@samsung.com: tested on exynos3250 based board]
Tested-by: default avatarChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent b5783dca
......@@ -24,56 +24,6 @@
#include "common.h"
#include "regs-pmu.h"
static inline void cpu_enter_lowpower_a9(void)
{
unsigned int v;
asm volatile(
" mcr p15, 0, %1, c7, c5, 0\n"
" mcr p15, 0, %1, c7, c10, 4\n"
/*
* Turn off coherency
*/
" mrc p15, 0, %0, c1, c0, 1\n"
" bic %0, %0, %3\n"
" mcr p15, 0, %0, c1, c0, 1\n"
" mrc p15, 0, %0, c1, c0, 0\n"
" bic %0, %0, %2\n"
" mcr p15, 0, %0, c1, c0, 0\n"
: "=&r" (v)
: "r" (0), "Ir" (CR_C), "Ir" (0x40)
: "cc");
}
static inline void cpu_enter_lowpower_a15(void)
{
unsigned int v;
asm volatile(
" mrc p15, 0, %0, c1, c0, 0\n"
" bic %0, %0, %1\n"
" mcr p15, 0, %0, c1, c0, 0\n"
: "=&r" (v)
: "Ir" (CR_C)
: "cc");
flush_cache_louis();
asm volatile(
/*
* Turn off coherency
*/
" mrc p15, 0, %0, c1, c0, 1\n"
" bic %0, %0, %1\n"
" mcr p15, 0, %0, c1, c0, 1\n"
: "=&r" (v)
: "Ir" (0x40)
: "cc");
isb();
dsb();
}
static inline void cpu_leave_lowpower(void)
{
unsigned int v;
......@@ -132,19 +82,8 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
void __ref exynos_cpu_die(unsigned int cpu)
{
int spurious = 0;
int primary_part = 0;
/*
* we're ready for shutdown now, so do it.
* Exynos4 is A9 based while Exynos5 is A15; check the CPU part
* number by reading the Main ID register and then perform the
* appropriate sequence for entering low power.
*/
asm("mrc p15, 0, %0, c0, c0, 0" : "=r"(primary_part) : : "cc");
if ((primary_part & 0xfff0) == 0xc0f0)
cpu_enter_lowpower_a15();
else
cpu_enter_lowpower_a9();
v7_exit_coherency_flush(louis);
platform_do_lowpower(cpu, &spurious);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment