e1000e: ESB2 config after link up

On ESB2, the MAC-to-PHY (Kumeran) interface must be configured after link
is up before any traffic is sent; a new PHY operations function pointer is
provided for this.  To facilitate read/write of the Kumeran registers
without blocking PHY register writes, the driver/firmware synchronization
method which previously used a hardware semaphore for both PHY and Kumeran
register accesses is now split.  New Kumeran register read/write functions
utilize this new synchronization method.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/e1000e/82571.c

@@ -1394,6 +1394,7 @@ static struct e1000_phy_operations e82_phy_ops_igp = {
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
 	.write_phy_reg		= e1000e_write_phy_reg_igp,
+	.cfg_on_link_up      	= NULL,
 };
 
 static struct e1000_phy_operations e82_phy_ops_m88 = {
@@ -1410,6 +1411,7 @@ static struct e1000_phy_operations e82_phy_ops_m88 = {
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
 	.write_phy_reg		= e1000e_write_phy_reg_m88,
+	.cfg_on_link_up      	= NULL,
 };
 
 static struct e1000_phy_operations e82_phy_ops_bm = {
@@ -1426,6 +1428,7 @@ static struct e1000_phy_operations e82_phy_ops_bm = {
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
 	.write_phy_reg		= e1000e_write_phy_reg_bm2,
+	.cfg_on_link_up      	= NULL,
 };
 
 static struct e1000_nvm_operations e82571_nvm_ops = {

drivers/net/e1000e/hw.h

@@ -739,6 +739,7 @@ struct e1000_phy_operations {
 	s32  (*set_d0_lplu_state)(struct e1000_hw *, bool);
 	s32  (*set_d3_lplu_state)(struct e1000_hw *, bool);
 	s32  (*write_phy_reg)(struct e1000_hw *, u32, u16);
+	s32  (*cfg_on_link_up)(struct e1000_hw *);
 };
 
 /* Function pointers for the NVM. */

drivers/net/e1000e/netdev.c

@@ -3493,6 +3493,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 					struct e1000_adapter, watchdog_task);
 	struct net_device *netdev = adapter->netdev;
 	struct e1000_mac_info *mac = &adapter->hw.mac;
+	struct e1000_phy_info *phy = &adapter->hw.phy;
 	struct e1000_ring *tx_ring = adapter->tx_ring;
 	struct e1000_hw *hw = &adapter->hw;
 	u32 link, tctl;
@@ -3599,6 +3600,13 @@ static void e1000_watchdog_task(struct work_struct *work)
 			tctl |= E1000_TCTL_EN;
 			ew32(TCTL, tctl);
 
+                        /*
+			 * Perform any post-link-up configuration before
+			 * reporting link up.
+			 */
+			if (phy->ops.cfg_on_link_up)
+				phy->ops.cfg_on_link_up(hw);
+
 			netif_carrier_on(netdev);
 			netif_tx_wake_all_queues(netdev);