Merge tag 'samsung-dt-6.6' of...

Merge tag 'samsung-dt-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt

Samsung DTS ARM changes for v6.6

1. Galaxy S II: correct LCD screen's physical size.
2. Add Samsung Galaxy Tab 3 8.0 boards (Exynos4212).
3. Galaxy S3 family: add USB connector and USB OTG. Full USB OTG still
   seems not to work, but at least HDMI improved and dtbs_check is
   happy.
4. Fix issues pointed out by dtbs_check and W=1: unit addresses, use
   'gpios' suffix over 'gpio', update i2c-arb device node to newer
   binding.
5. Few white-space cleanups.

* tag 'samsung-dt-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: samsung: exynos4412-midas: add USB connector and USB OTG
  ARM: dts: samsung: exynos5250-snow: switch i2c-arb to new child variant
  ARM: dts: samsung: exynos5250-snow: use 'gpios' suffix for i2c-arb
  ARM: dts: samsung: fix Exynos4212 Tab3 makefile entries
  ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards
  ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)
  ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)
  ARM: dts: samsung: exynos4210-i9100: Fix LCD screen's physical size
  ARM: dts: s5pv210: minor whitespace cleanup around '='
  ARM: dts: exynos: minor whitespace cleanup around '='

Link: https://lore.kernel.org/r/20230810151250.220202-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/samsung/Makefile

@@ -9,6 +9,9 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
 	exynos4210-universal_c210.dtb \
+	exynos4212-tab3-3g8.dtb \
+	exynos4212-tab3-lte8.dtb \
+	exynos4212-tab3-wifi8.dtb \
 	exynos4412-i9300.dtb \
 	exynos4412-i9305.dtb \
 	exynos4412-itop-elite.dtb \

arch/arm/boot/dts/samsung/exynos4210-i9100.dts

@@ -207,8 +207,8 @@ lcd@0 {
 			power-on-delay = <10>;
 			reset-delay = <10>;
 
-			panel-width-mm = <90>;
-			panel-height-mm = <154>;
+			panel-width-mm = <56>;
+			panel-height-mm = <93>;
 
 			display-timings {
 				timing {

arch/arm/boot/dts/samsung/exynos4210-trats.dts

@@ -20,10 +20,10 @@ / {
 
 	memory@40000000 {
 		device_type = "memory";
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000
-			0x60000000 0x10000000
-			0x70000000 0x10000000>;
+		reg = <0x40000000 0x10000000
+		       0x50000000 0x10000000
+		       0x60000000 0x10000000
+		       0x70000000 0x10000000>;
 	};
 
 	aliases {

arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts

@@ -20,8 +20,8 @@ / {
 
 	memory@40000000 {
 		device_type = "memory";
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000>;
+		reg = <0x40000000 0x10000000
+		       0x50000000 0x10000000>;
 	};
 
 	aliases {

arch/arm/boot/dts/samsung/exynos4212-tab3-3g8.dts

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 based Galaxy Tab 3 8.0 3G board device tree
+ * source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4212-tab3.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 3 8.0 3G (SM-T311) based on Exynos4212";
+	compatible = "samsung,t311", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
+	chassis-type = "tablet";
+};
+
+/* Pin control sleep state overrides */
+&sleep0 {
+	PIN_SLP(gpb-5, INPUT, UP);
+};
+
+&sleep1 {
+	PIN_SLP(gpl0-0, OUT0, NONE);
+	PIN_SLP(gpl1-0, OUT0, NONE);
+	PIN_SLP(gpl2-4, OUT0, NONE);
+	PIN_SLP(gpm3-3, OUT1, NONE);
+};

arch/arm/boot/dts/samsung/exynos4212-tab3-lte8.dts

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 based Galaxy Tab 3 8.0 LTE board device tree
+ * source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4212-tab3.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 3 8.0 LTE (SM-T315) based on Exynos4212";
+	compatible = "samsung,t315", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
+	chassis-type = "tablet";
+};
+
+/* Pin control sleep state overrides */
+&sleep0 {
+	PIN_SLP(gpa0-4, INPUT, UP);
+	PIN_SLP(gpa0-5, INPUT, UP);
+
+	PIN_SLP(gpb-5, INPUT, UP);
+
+	PIN_SLP(gpc0-0, PREV, NONE);
+	PIN_SLP(gpc1-3, INPUT, NONE);
+
+	PIN_SLP(gpf1-6, INPUT, NONE);
+	PIN_SLP(gpf2-2, PREV, NONE);
+};
+
+&sleep1 {
+	PIN_SLP(gpl0-0, PREV, NONE);
+
+	PIN_SLP(gpl1-0, PREV, NONE);
+
+	PIN_SLP(gpl2-1, INPUT, DOWN);
+	PIN_SLP(gpl2-2, INPUT, DOWN);
+	PIN_SLP(gpl2-4, OUT0, NONE);
+	PIN_SLP(gpl2-5, PREV, NONE);
+
+	PIN_SLP(gpm3-3, OUT1, NONE);
+};

arch/arm/boot/dts/samsung/exynos4212-tab3-wifi8.dts

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 based Galaxy Tab 3 8.0 WiFi board device tree
+ * source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4212-tab3.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 3 8.0 WiFi (SM-T310) based on Exynos4212";
+	compatible = "samsung,t310", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
+	chassis-type = "tablet";
+};
+
+&i2c_lightsensor {
+	status = "okay";
+
+	lightsensor@10 {
+		compatible = "capella,cm3323";
+		reg = <0x10>;
+	};
+};

arch/arm/boot/dts/samsung/exynos4412-midas.dtsi

@@ -182,6 +182,38 @@ pmic@66 {
 			pinctrl-0 = <&max77693_irq>;
 			reg = <0x66>;
 
+			muic {
+				compatible = "maxim,max77693-muic";
+
+				connector {
+					compatible = "samsung,usb-connector-11pin",
+						     "usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							muic_to_usb: endpoint {
+								remote-endpoint = <&usb_to_muic>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							muic_to_mhl: endpoint {
+								remote-endpoint = <&mhl_to_muic>;
+							};
+						};
+					};
+				};
+			};
+
 			regulators {
 				esafeout1_reg: ESAFEOUT1 {
 					regulator-name = "ESAFEOUT1";
@@ -287,6 +319,14 @@ mhl_to_hdmi: endpoint {
 						remote-endpoint = <&hdmi_to_mhl>;
 					};
 				};
+
+				port@1 {
+					reg = <1>;
+
+					mhl_to_muic: endpoint {
+						remote-endpoint = <&muic_to_mhl>;
+					};
+				};
 			};
 		};
 	};
@@ -545,8 +585,16 @@ hdmi_to_mhl: endpoint {
 &hsotg {
 	vusb_d-supply = <&ldo15_reg>;
 	vusb_a-supply = <&ldo12_reg>;
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	role-switch-default-mode = "peripheral";
+	usb-role-switch;
 	status = "okay";
+
+	port {
+		usb_to_muic: endpoint {
+			remote-endpoint = <&muic_to_usb>;
+		};
+	};
 };
 
 &i2c_0 {
@@ -990,7 +1038,7 @@ &mshc_0 {
 
 &pmu_system_controller {
 	assigned-clocks = <&pmu_system_controller 0>;
-	assigned-clock-parents =  <&clock CLK_XUSBXTI>;
+	assigned-clock-parents = <&clock CLK_XUSBXTI>;
 };
 
 &pinctrl_0 {

arch/arm/boot/dts/samsung/exynos5250-snow-common.dtsi

@@ -60,12 +60,9 @@ vbat: vbat-fixed-regulator {
 
 	i2c-arbitrator {
 		compatible = "i2c-arb-gpio-challenge";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		i2c-parent = <&i2c_4>;
 
-		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+		our-claim-gpios = <&gpf0 3 GPIO_ACTIVE_LOW>;
 		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
 		slew-delay-us = <10>;
 		wait-retry-us = <3000>;
@@ -75,8 +72,7 @@ i2c-arbitrator {
 		pinctrl-0 = <&arb_our_claim &arb_their_claim>;
 
 		/* Use ID 104 as a hint that we're on physical bus 4 */
-		i2c_104: i2c@0 {
-			reg = <0>;
+		i2c_104: i2c-arb {
 			#address-cells = <1>;
 			#size-cells = <0>;
 

arch/arm/boot/dts/samsung/s3c6410-mini6410.dts

@@ -51,7 +51,7 @@ srom-cs1-bus@18000000 {
 
 		ethernet@18000000 {
 			compatible = "davicom,dm9000";
-			reg = <0x18000000 0x2 0x18000004 0x2>;
+			reg = <0x18000000 0x2>, <0x18000004 0x2>;
 			interrupt-parent = <&gpn>;
 			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 			davicom,no-eeprom;

arch/arm/boot/dts/samsung/s5pv210-pinctrl.dtsi

@@ -832,12 +832,12 @@ lcd_clk: lcd-clk-pins {
 	};
 
 	lcd_data24: lcd-data-width24-pins {
-		samsung,pins =  "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+			       "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+			       "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+			       "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+			       "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
 		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
 		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;

arch/arm/boot/dts/samsung/s5pv210-smdkv210.dts

@@ -41,7 +41,7 @@ pmic_ap_clk: clock-0 {
 
 	ethernet@a8000000 {
 		compatible = "davicom,dm9000";
-		reg = <0xA8000000 0x2 0xA8000002 0x2>;
+		reg = <0xa8000000 0x2>, <0xa8000002 0x2>;
 		interrupt-parent = <&gph1>;
 		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 		local-mac-address = [00 00 de ad be ef];