Commit 760bb977 authored by Heiko Stuebner's avatar Heiko Stuebner

ARM: dts: rockchip: add usb phys to Cortex-A9 socs

This adds the usbphy nodes to rk3066 and rk3188, which share the usb hosts
in rk3xxx.dtsi and also enables it on boards based around these socs.

The usb-phy itself is the same as used on the rk3288 already.
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent ec32bd9f
......@@ -202,6 +202,10 @@ &uart3 {
status = "okay";
};
&usbphy {
status = "okay";
};
&wdt {
status = "okay";
};
......@@ -460,6 +460,10 @@ &usb_host {
status = "okay";
};
&usbphy {
status = "okay";
};
&usb_otg {
status = "okay";
};
......
......@@ -169,6 +169,28 @@ timer@2003a000 {
clock-names = "timer", "pclk";
};
usbphy: phy {
compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy";
rockchip,grf = <&grf>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
usbphy0: usb-phy0 {
#phy-cells = <0>;
reg = <0x17c>;
clocks = <&cru SCLK_OTGPHY0>;
clock-names = "phyclk";
};
usbphy1: usb-phy1 {
#phy-cells = <0>;
reg = <0x188>;
clocks = <&cru SCLK_OTGPHY1>;
clock-names = "phyclk";
};
};
pinctrl: pinctrl {
compatible = "rockchip,rk3066a-pinctrl";
rockchip,grf = <&grf>;
......
......@@ -359,6 +359,10 @@ &uart3 {
status = "okay";
};
&usbphy {
status = "okay";
};
&usb_host {
status = "okay";
};
......
......@@ -130,6 +130,28 @@ cru: clock-controller@20000000 {
#reset-cells = <1>;
};
usbphy: phy {
compatible = "rockchip,rk3188-usb-phy", "rockchip,rk3288-usb-phy";
rockchip,grf = <&grf>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
usbphy0: usb-phy0 {
#phy-cells = <0>;
reg = <0x10c>;
clocks = <&cru SCLK_OTGPHY0>;
clock-names = "phyclk";
};
usbphy1: usb-phy1 {
#phy-cells = <0>;
reg = <0x11c>;
clocks = <&cru SCLK_OTGPHY1>;
clock-names = "phyclk";
};
};
pinctrl: pinctrl {
compatible = "rockchip,rk3188-pinctrl";
rockchip,grf = <&grf>;
......
......@@ -177,6 +177,8 @@ usb_otg: usb@10180000 {
g-rx-fifo-size = <275>;
g-tx-fifo-size = <256 128 128 64 64 32>;
g-use-dma;
phys = <&usbphy0>;
phy-names = "usb2-phy";
status = "disabled";
};
......@@ -187,6 +189,8 @@ usb_host: usb@101c0000 {
clocks = <&cru HCLK_OTG1>;
clock-names = "otg";
dr_mode = "host";
phys = <&usbphy1>;
phy-names = "usb2-phy";
status = "disabled";
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment