Commit 761ed4a9 authored by Rob Herring's avatar Rob Herring Committed by Greg Kroah-Hartman

tty: serial_core: convert uart_close to use tty_port_close

tty_port_close handles much of the common parts of tty close. Convert
uart_close to use it and move the serial_core specific parts into
tty_port.shutdown function. This will be needed to use tty_port functions
directly from in kernel clients.

This change causes ops->stop_rx() to be called after uart_wait_until_sent()
is called which I think should be fine. Otherwise, the sequence of the
close should be the same.

Cc: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: default avatarRob Herring <robh@kernel.org>
Acked-by: default avatarAlan Cox <alan@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent b3b57646
......@@ -1461,7 +1461,6 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
{
struct uart_state *state = tty->driver_data;
struct tty_port *port;
struct uart_port *uport;
if (!state) {
struct uart_driver *drv = tty->driver->driver_state;
......@@ -1477,56 +1476,36 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
port = &state->port;
pr_debug("uart_close(%d) called\n", tty->index);
if (tty_port_close_start(port, tty, filp) == 0)
return;
tty_port_close(tty->port, tty, filp);
}
mutex_lock(&port->mutex);
uport = uart_port_check(state);
static void uart_tty_port_shutdown(struct tty_port *port)
{
struct uart_state *state = container_of(port, struct uart_state, port);
struct uart_port *uport = uart_port_check(state);
spin_lock_irq(&uport->lock);
/*
* At this point, we stop accepting input. To do this, we
* disable the receive line status interrupts.
*/
if (tty_port_initialized(port) &&
!WARN(!uport, "detached port still initialized!\n")) {
spin_lock_irq(&uport->lock);
uport->ops->stop_rx(uport);
spin_unlock_irq(&uport->lock);
/*
* Before we drop DTR, make sure the UART transmitter
* has completely drained; this is especially
* important if there is a transmit FIFO!
*/
uart_wait_until_sent(tty, uport->timeout);
}
WARN(!uport, "detached port still initialized!\n");
uart_shutdown(tty, state);
tty_port_tty_set(port, NULL);
uport->ops->stop_rx(uport);
spin_lock_irq(&port->lock);
spin_unlock_irq(&uport->lock);
if (port->blocked_open) {
spin_unlock_irq(&port->lock);
if (port->close_delay)
msleep_interruptible(jiffies_to_msecs(port->close_delay));
spin_lock_irq(&port->lock);
} else if (uport && !uart_console(uport)) {
spin_unlock_irq(&port->lock);
uart_change_pm(state, UART_PM_STATE_OFF);
spin_lock_irq(&port->lock);
}
spin_unlock_irq(&port->lock);
tty_port_set_active(port, 0);
uart_port_shutdown(port);
/*
* Wake up anyone trying to open this port.
* It's possible for shutdown to be called after suspend if we get
* a DCD drop (hangup) at just the right time. Clear suspended bit so
* we don't try to resume a port that has been shutdown.
*/
wake_up_interruptible(&port->open_wait);
tty_port_set_suspended(port, 0);
mutex_unlock(&port->mutex);
uart_change_pm(state, UART_PM_STATE_OFF);
tty_ldisc_flush(tty);
tty->closing = 0;
}
static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
......@@ -2446,6 +2425,7 @@ static const struct tty_port_operations uart_port_ops = {
.carrier_raised = uart_carrier_raised,
.dtr_rts = uart_dtr_rts,
.activate = uart_port_activate,
.shutdown = uart_tty_port_shutdown,
};
/**
......@@ -2762,6 +2742,8 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
uport->cons = drv->cons;
uport->minor = drv->tty_driver->minor_start + uport->line;
port->console = uart_console(uport);
/*
* If this port is a console, then the spinlock is already
* initialised.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment