Commit 763ad317 authored by Alexey Brodkin's avatar Alexey Brodkin Committed by Greg Kroah-Hartman

ARCv2: SLC: Make sure busy bit is set properly for region ops

commit b37174d9 upstream.

c70c4733 "ARCv2: SLC: Make sure busy bit is set properly on SLC flushing"
fixes problem for entire SLC operation where the problem was initially
caught. But given a nature of the issue it is perfectly possible for
busy bit to be read incorrectly even when region operation was started.

So extending initial fix for regional operation as well.
Signed-off-by: default avatarAlexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: default avatarVineet Gupta <vgupta@synopsys.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 8537b1e0
......@@ -697,6 +697,9 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op)
write_aux_reg(ARC_REG_SLC_RGN_END, (paddr + sz + l2_line_sz - 1));
write_aux_reg(ARC_REG_SLC_RGN_START, paddr);
/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
read_aux_reg(ARC_REG_SLC_CTRL);
while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
spin_unlock_irqrestore(&lock, flags);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment