Commit 765b7d4c authored by Soren Brinkmann's avatar Soren Brinkmann Committed by Mike Turquette

clk/zynq/clkc: Add CLK_SET_RATE_PARENT flag to ethernet muxes

Zynq's Ethernet clocks are created by the following hierarchy:
	mux0 ---> div0 ---> div1 ---> mux1 ---> gate
Rate change requests on the gate have to propagate all the way up to
div0 to properly leverage all dividers. Mux1 was missing the
CLK_SET_RATE_PARENT flag, which is required to achieve this.

This does not fix a specific regression but the clock driver was merged
for 3.11-rc1, so best to fix the known bugs before the release.
Signed-off-by: default avatarSoren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
Signed-off-by: default avatarMike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: added to changelog]
parent 252957cc
......@@ -365,8 +365,9 @@ static void __init zynq_clk_setup(struct device_node *np)
CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 20, 6,
CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
&gem0clk_lock);
clk = clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2, 0,
SLCR_GEM0_CLK_CTRL, 6, 1, 0, &gem0clk_lock);
clk = clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2,
CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 6, 1, 0,
&gem0clk_lock);
clks[gem0] = clk_register_gate(NULL, clk_output_name[gem0],
"gem0_emio_mux", CLK_SET_RATE_PARENT,
SLCR_GEM0_CLK_CTRL, 0, 0, &gem0clk_lock);
......@@ -387,8 +388,9 @@ static void __init zynq_clk_setup(struct device_node *np)
CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 20, 6,
CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
&gem1clk_lock);
clk = clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2, 0,
SLCR_GEM1_CLK_CTRL, 6, 1, 0, &gem1clk_lock);
clk = clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2,
CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 6, 1, 0,
&gem1clk_lock);
clks[gem1] = clk_register_gate(NULL, clk_output_name[gem1],
"gem1_emio_mux", CLK_SET_RATE_PARENT,
SLCR_GEM1_CLK_CTRL, 0, 0, &gem1clk_lock);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment