Commit 76ba59f8 authored by Marc Zyngier's avatar Marc Zyngier Committed by Jason Cooper

genirq: Add irq_domain-aware core IRQ handler

Calling irq_find_mapping from outside a irq_{enter,exit} section is
unsafe and produces ugly messages if CONFIG_PROVE_RCU is enabled:
If coming from the idle state, the rcu_read_lock call in irq_find_mapping
will generate an unpleasant warning:

<quote>
===============================
[ INFO: suspicious RCU usage. ]
3.16.0-rc1+ #135 Not tainted
-------------------------------
include/linux/rcupdate.h:871 rcu_read_lock() used illegally while idle!

other info that might help us debug this:

RCU used illegally from idle CPU!
rcu_scheduler_active = 1, debug_locks = 0
RCU used illegally from extended quiescent state!
1 lock held by swapper/0/0:
 #0:  (rcu_read_lock){......}, at: [<ffffffc00010206c>]
irq_find_mapping+0x4c/0x198
</quote>

As this issue is fairly widespread and involves at least three
different architectures, a possible solution is to add a new
handle_domain_irq entry point into the generic IRQ code that
the interrupt controller code can call.

This new function takes an irq_domain, and calls into irq_find_domain
inside the irq_{enter,exit} block. An additional "lookup" parameter is
used to allow non-domain architecture code to be replaced by this as well.

Interrupt controllers can then be updated to use the new mechanism.

This code is sitting behind a new CONFIG_HANDLE_DOMAIN_IRQ, as not all
architectures implement set_irq_regs (yes, mn10300, I'm looking at you...).
Reported-by: default avatarVladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1409047421-27649-2-git-send-email-marc.zyngier@arm.comSigned-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 7d1311b9
......@@ -12,6 +12,8 @@ struct irq_affinity_notify;
struct proc_dir_entry;
struct module;
struct irq_desc;
struct irq_domain;
struct pt_regs;
/**
* struct irq_desc - interrupt descriptor
......@@ -118,6 +120,23 @@ static inline void generic_handle_irq_desc(unsigned int irq, struct irq_desc *de
int generic_handle_irq(unsigned int irq);
#ifdef CONFIG_HANDLE_DOMAIN_IRQ
/*
* Convert a HW interrupt number to a logical one using a IRQ domain,
* and handle the result interrupt number. Return -EINVAL if
* conversion failed. Providing a NULL domain indicates that the
* conversion has already been done.
*/
int __handle_domain_irq(struct irq_domain *domain, unsigned int hwirq,
bool lookup, struct pt_regs *regs);
static inline int handle_domain_irq(struct irq_domain *domain,
unsigned int hwirq, struct pt_regs *regs)
{
return __handle_domain_irq(domain, hwirq, true, regs);
}
#endif
/* Test to see if a driver has successfully requested an irq */
static inline int irq_has_action(unsigned int irq)
{
......
......@@ -55,6 +55,9 @@ config GENERIC_IRQ_CHIP
config IRQ_DOMAIN
bool
config HANDLE_DOMAIN_IRQ
bool
config IRQ_DOMAIN_DEBUG
bool "Expose hardware/virtual IRQ mapping via debugfs"
depends on IRQ_DOMAIN && DEBUG_FS
......
......@@ -14,6 +14,7 @@
#include <linux/kernel_stat.h>
#include <linux/radix-tree.h>
#include <linux/bitmap.h>
#include <linux/irqdomain.h>
#include "internals.h"
......@@ -336,6 +337,47 @@ int generic_handle_irq(unsigned int irq)
}
EXPORT_SYMBOL_GPL(generic_handle_irq);
#ifdef CONFIG_HANDLE_DOMAIN_IRQ
/**
* __handle_domain_irq - Invoke the handler for a HW irq belonging to a domain
* @domain: The domain where to perform the lookup
* @hwirq: The HW irq number to convert to a logical one
* @lookup: Whether to perform the domain lookup or not
* @regs: Register file coming from the low-level handling code
*
* Returns: 0 on success, or -EINVAL if conversion has failed
*/
int __handle_domain_irq(struct irq_domain *domain, unsigned int hwirq,
bool lookup, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
unsigned int irq = hwirq;
int ret = 0;
irq_enter();
#ifdef CONFIG_IRQ_DOMAIN
if (lookup)
irq = irq_find_mapping(domain, hwirq);
#endif
/*
* Some hardware gives randomly wrong interrupts. Rather
* than crashing, do something sensible.
*/
if (unlikely(!irq || irq >= nr_irqs)) {
ack_bad_irq(irq);
ret = -EINVAL;
} else {
generic_handle_irq(irq);
}
irq_exit();
set_irq_regs(old_regs);
return ret;
}
#endif
/* Dynamic interrupt handling */
/**
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment