Commit 76e3d7fa authored by David S. Miller's avatar David S. Miller

Merge branch 'rk3308-gmac'

Tobias Schramm says:

====================
Add support for RK3308 gmac

The Rockchip RK3308 SoC features an internal gmac. Only the signals
required for RMII are exposed so it is limited to 10/100 Mbit/s operation.
This patchset adds support for it.
I've tested the patchset on a Rock Pi S, works fine.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 2d1c5f29 8d1a81f2
......@@ -19,6 +19,7 @@ select:
- rockchip,rk3128-gmac
- rockchip,rk3228-gmac
- rockchip,rk3288-gmac
- rockchip,rk3308-gmac
- rockchip,rk3328-gmac
- rockchip,rk3366-gmac
- rockchip,rk3368-gmac
......@@ -38,6 +39,7 @@ properties:
- rockchip,rk3128-gmac
- rockchip,rk3228-gmac
- rockchip,rk3288-gmac
- rockchip,rk3308-gmac
- rockchip,rk3328-gmac
- rockchip,rk3366-gmac
- rockchip,rk3368-gmac
......
......@@ -637,6 +637,28 @@ nfc: nand-controller@ff4b0000 {
status = "disabled";
};
gmac: ethernet@ff4e0000 {
compatible = "rockchip,rk3308-gmac";
reg = <0x0 0xff4e0000 0x0 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX_TX>,
<&cru SCLK_MAC_RX_TX>, <&cru SCLK_MAC_REF>,
<&cru SCLK_MAC>, <&cru ACLK_MAC>,
<&cru PCLK_MAC>, <&cru SCLK_MAC_RMII>;
clock-names = "stmmaceth", "mac_clk_rx",
"mac_clk_tx", "clk_mac_ref",
"clk_mac_refout", "aclk_mac",
"pclk_mac", "clk_mac_speed";
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&rmii_pins &mac_refclk_12ma>;
resets = <&cru SRST_MAC_A>;
reset-names = "stmmaceth";
rockchip,grf = <&grf>;
status = "disabled";
};
cru: clock-controller@ff500000 {
compatible = "rockchip,rk3308-cru";
reg = <0x0 0xff500000 0x0 0x1000>;
......
......@@ -482,6 +482,54 @@ static const struct rk_gmac_ops rk3288_ops = {
.set_rmii_speed = rk3288_set_rmii_speed,
};
#define RK3308_GRF_MAC_CON0 0x04a0
/* RK3308_GRF_MAC_CON0 */
#define RK3308_GMAC_PHY_INTF_SEL_RMII (GRF_CLR_BIT(2) | GRF_CLR_BIT(3) | \
GRF_BIT(4))
#define RK3308_GMAC_FLOW_CTRL GRF_BIT(3)
#define RK3308_GMAC_FLOW_CTRL_CLR GRF_CLR_BIT(3)
#define RK3308_GMAC_SPEED_10M GRF_CLR_BIT(0)
#define RK3308_GMAC_SPEED_100M GRF_BIT(0)
static void rk3308_set_to_rmii(struct rk_priv_data *bsp_priv)
{
struct device *dev = &bsp_priv->pdev->dev;
if (IS_ERR(bsp_priv->grf)) {
dev_err(dev, "Missing rockchip,grf property\n");
return;
}
regmap_write(bsp_priv->grf, RK3308_GRF_MAC_CON0,
RK3308_GMAC_PHY_INTF_SEL_RMII);
}
static void rk3308_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
{
struct device *dev = &bsp_priv->pdev->dev;
if (IS_ERR(bsp_priv->grf)) {
dev_err(dev, "Missing rockchip,grf property\n");
return;
}
if (speed == 10) {
regmap_write(bsp_priv->grf, RK3308_GRF_MAC_CON0,
RK3308_GMAC_SPEED_10M);
} else if (speed == 100) {
regmap_write(bsp_priv->grf, RK3308_GRF_MAC_CON0,
RK3308_GMAC_SPEED_100M);
} else {
dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
}
}
static const struct rk_gmac_ops rk3308_ops = {
.set_to_rmii = rk3308_set_to_rmii,
.set_rmii_speed = rk3308_set_rmii_speed,
};
#define RK3328_GRF_MAC_CON0 0x0900
#define RK3328_GRF_MAC_CON1 0x0904
#define RK3328_GRF_MAC_CON2 0x0908
......@@ -1477,6 +1525,7 @@ static const struct of_device_id rk_gmac_dwmac_match[] = {
{ .compatible = "rockchip,rk3128-gmac", .data = &rk3128_ops },
{ .compatible = "rockchip,rk3228-gmac", .data = &rk3228_ops },
{ .compatible = "rockchip,rk3288-gmac", .data = &rk3288_ops },
{ .compatible = "rockchip,rk3308-gmac", .data = &rk3308_ops },
{ .compatible = "rockchip,rk3328-gmac", .data = &rk3328_ops },
{ .compatible = "rockchip,rk3366-gmac", .data = &rk3366_ops },
{ .compatible = "rockchip,rk3368-gmac", .data = &rk3368_ops },
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment