Commit 7706e376 authored by Jisheng Zhang's avatar Jisheng Zhang

ARM: dts: berlin: Use generic "ngpios" rather than "snps,nr-gpios"

This is to remove similar errors as below:

OF: /.../gpio-port@0: could not find phandle

Commit 7569486d ("gpio: dwapb: Add ngpios DT-property support")
explained the reason of above errors well and added the generic
"ngpios" property, let's use it.
Signed-off-by: default avatarJisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent b4385b56
......@@ -191,7 +191,7 @@ porta: gpio-port@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
......@@ -209,7 +209,7 @@ portb: gpio-port@1 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
......@@ -227,7 +227,7 @@ portc: gpio-port@2 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
......@@ -245,7 +245,7 @@ portd: gpio-port@3 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
......@@ -446,7 +446,7 @@ portf: gpio-port@5 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
ngpios = <8>;
reg = <0>;
};
};
......@@ -461,7 +461,7 @@ porte: gpio-port@4 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
......
......@@ -181,7 +181,7 @@ porta: gpio-port@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
......@@ -199,7 +199,7 @@ portb: gpio-port@1 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
......@@ -217,7 +217,7 @@ portc: gpio-port@2 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
......@@ -235,7 +235,7 @@ portd: gpio-port@3 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
......@@ -473,7 +473,7 @@ portf: gpio-port@5 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
ngpios = <8>;
reg = <0>;
};
};
......@@ -518,7 +518,7 @@ porte: gpio-port@4 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
ngpios = <8>;
reg = <0>;
};
};
......
......@@ -252,7 +252,7 @@ porta: gpio-port@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
......@@ -270,7 +270,7 @@ portb: gpio-port@1 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
......@@ -288,7 +288,7 @@ portc: gpio-port@2 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
......@@ -306,7 +306,7 @@ portd: gpio-port@3 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
......@@ -552,7 +552,7 @@ portf: gpio-port@5 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
ngpios = <32>;
reg = <0>;
};
};
......@@ -613,7 +613,7 @@ porte: gpio-port@4 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
ngpios = <32>;
reg = <0>;
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment