Commit 771f8726 authored by Sean Young's avatar Sean Young Committed by Mauro Carvalho Chehab

[media] media: vp7045: port TwinhanDTV Alpha to rc-core

Only the nec protocol is understood, but then it doesn't pass on
the full scancode and it ignores the nec repeats its own remote
sends, so holding buttons does not work.
Signed-off-by: default avatarSean Young <sean@mess.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
parent b9f407e3
...@@ -66,7 +66,7 @@ static struct rc_map_list twinhan_vp1027_map = { ...@@ -66,7 +66,7 @@ static struct rc_map_list twinhan_vp1027_map = {
.map = { .map = {
.scan = twinhan_vp1027, .scan = twinhan_vp1027,
.size = ARRAY_SIZE(twinhan_vp1027), .size = ARRAY_SIZE(twinhan_vp1027),
.rc_proto = RC_PROTO_UNKNOWN, /* Legacy IR type */ .rc_proto = RC_PROTO_NEC,
.name = RC_MAP_TWINHAN_VP1027_DVBS, .name = RC_MAP_TWINHAN_VP1027_DVBS,
} }
}; };
......
...@@ -283,6 +283,7 @@ static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d) ...@@ -283,6 +283,7 @@ static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d)
dev->input_phys = d->rc_phys; dev->input_phys = d->rc_phys;
dev->dev.parent = &d->udev->dev; dev->dev.parent = &d->udev->dev;
dev->priv = d; dev->priv = d;
dev->scancode_mask = d->props.rc.core.scancode_mask;
err = rc_register_device(dev); err = rc_register_device(dev);
if (err < 0) { if (err < 0) {
......
...@@ -207,6 +207,7 @@ struct dvb_rc { ...@@ -207,6 +207,7 @@ struct dvb_rc {
int (*rc_query) (struct dvb_usb_device *d); int (*rc_query) (struct dvb_usb_device *d);
int rc_interval; int rc_interval;
bool bulk_mode; /* uses bulk mode */ bool bulk_mode; /* uses bulk mode */
u32 scancode_mask;
}; };
/** /**
......
...@@ -97,82 +97,22 @@ static int vp7045_power_ctrl(struct dvb_usb_device *d, int onoff) ...@@ -97,82 +97,22 @@ static int vp7045_power_ctrl(struct dvb_usb_device *d, int onoff)
return vp7045_usb_op(d,SET_TUNER_POWER,&v,1,NULL,0,150); return vp7045_usb_op(d,SET_TUNER_POWER,&v,1,NULL,0,150);
} }
/* remote control stuff */ static int vp7045_rc_query(struct dvb_usb_device *d)
/* The keymapping struct. Somehow this should be loaded to the driver, but
* currently it is hardcoded. */
static struct rc_map_table rc_map_vp7045_table[] = {
{ 0x0016, KEY_POWER },
{ 0x0010, KEY_MUTE },
{ 0x0003, KEY_1 },
{ 0x0001, KEY_2 },
{ 0x0006, KEY_3 },
{ 0x0009, KEY_4 },
{ 0x001d, KEY_5 },
{ 0x001f, KEY_6 },
{ 0x000d, KEY_7 },
{ 0x0019, KEY_8 },
{ 0x001b, KEY_9 },
{ 0x0015, KEY_0 },
{ 0x0005, KEY_CHANNELUP },
{ 0x0002, KEY_CHANNELDOWN },
{ 0x001e, KEY_VOLUMEUP },
{ 0x000a, KEY_VOLUMEDOWN },
{ 0x0011, KEY_RECORD },
{ 0x0017, KEY_FAVORITES }, /* Heart symbol - Channel list. */
{ 0x0014, KEY_PLAY },
{ 0x001a, KEY_STOP },
{ 0x0040, KEY_REWIND },
{ 0x0012, KEY_FASTFORWARD },
{ 0x000e, KEY_PREVIOUS }, /* Recall - Previous channel. */
{ 0x004c, KEY_PAUSE },
{ 0x004d, KEY_SCREEN }, /* Full screen mode. */
{ 0x0054, KEY_AUDIO }, /* MTS - Switch to secondary audio. */
{ 0x000c, KEY_CANCEL }, /* Cancel */
{ 0x001c, KEY_EPG }, /* EPG */
{ 0x0000, KEY_TAB }, /* Tab */
{ 0x0048, KEY_INFO }, /* Preview */
{ 0x0004, KEY_LIST }, /* RecordList */
{ 0x000f, KEY_TEXT }, /* Teletext */
{ 0x0041, KEY_PREVIOUSSONG },
{ 0x0042, KEY_NEXTSONG },
{ 0x004b, KEY_UP },
{ 0x0051, KEY_DOWN },
{ 0x004e, KEY_LEFT },
{ 0x0052, KEY_RIGHT },
{ 0x004f, KEY_ENTER },
{ 0x0013, KEY_CANCEL },
{ 0x004a, KEY_CLEAR },
{ 0x0054, KEY_PRINT }, /* Capture */
{ 0x0043, KEY_SUBTITLE }, /* Subtitle/CC */
{ 0x0008, KEY_VIDEO }, /* A/V */
{ 0x0007, KEY_SLEEP }, /* Hibernate */
{ 0x0045, KEY_ZOOM }, /* Zoom+ */
{ 0x0018, KEY_RED},
{ 0x0053, KEY_GREEN},
{ 0x005e, KEY_YELLOW},
{ 0x005f, KEY_BLUE}
};
static int vp7045_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{ {
u8 key; u8 key;
int i;
vp7045_usb_op(d,RC_VAL_READ,NULL,0,&key,1,20); vp7045_usb_op(d,RC_VAL_READ,NULL,0,&key,1,20);
deb_rc("remote query key: %x %d\n",key,key); deb_rc("remote query key: %x %d\n",key,key);
if (key == 0x44) { if (key != 0x44) {
*state = REMOTE_NO_KEY_PRESSED; /*
return 0; * The 8 bit address isn't available, but since the remote uses
* address 0 we'll use that. nec repeats are ignored too, even
* though the remote sends them.
*/
rc_keydown(d->rc_dev, RC_PROTO_NEC, RC_SCANCODE_NEC(0, key), 0);
} }
for (i = 0; i < ARRAY_SIZE(rc_map_vp7045_table); i++)
if (rc5_data(&rc_map_vp7045_table[i]) == key) {
*state = REMOTE_KEY_PRESSED;
*event = rc_map_vp7045_table[i].keycode;
break;
}
return 0; return 0;
} }
...@@ -265,11 +205,13 @@ static struct dvb_usb_device_properties vp7045_properties = { ...@@ -265,11 +205,13 @@ static struct dvb_usb_device_properties vp7045_properties = {
.power_ctrl = vp7045_power_ctrl, .power_ctrl = vp7045_power_ctrl,
.read_mac_address = vp7045_read_mac_addr, .read_mac_address = vp7045_read_mac_addr,
.rc.legacy = { .rc.core = {
.rc_interval = 400, .rc_interval = 400,
.rc_map_table = rc_map_vp7045_table, .rc_codes = RC_MAP_TWINHAN_VP1027_DVBS,
.rc_map_size = ARRAY_SIZE(rc_map_vp7045_table), .module_name = KBUILD_MODNAME,
.rc_query = vp7045_rc_query, .rc_query = vp7045_rc_query,
.allowed_protos = RC_PROTO_BIT_NEC,
.scancode_mask = 0xff,
}, },
.num_device_descs = 2, .num_device_descs = 2,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment