Commit 77332894 authored by Marcus Sundberg's avatar Marcus Sundberg Committed by Francois Romieu

r8169: avoid thrashing PCI conf space above RTL_GIGA_MAC_VER_06

The magic write to register 0x82 will often cause PCI config space on
my 8168 (PCI ID 10ec:8168, revision 2. mounted in an LG P300 laptop)
to be filled with ones during driver load, and thus breaking NIC
operation until reboot. If it does not happen on first driver load it
can easily be reproduced by unloading and loading the driver a few
times.

The magic write was added long ago by this commit:

Author: François Romieu <romieu@fr.zoreil.com>
Date:   Sat Jan 10 06:00:46 2004 -0500

     [netdrvr r8169] Merge of changes done by Realtek to rtl8169_init_one():
     - phy capability settings allows lower or equal capability as suggested
       in Realtek's changes;
     - I/O voodoo;
     - no need to s/mdio_write/RTL8169_WRITE_GMII_REG/;
     - s/rtl8169_hw_PHY_config/rtl8169_hw_phy_config/;
     - rtl8169_hw_phy_config(): ad-hoc struct "phy_magic" to limit duplication
       of code (yep, the u16 -> int conversions should work as expected);
     - variable renames and whitepace changes ignored.

As the 8168 wasn't supported by that version this patch simply removes
the bogus write from mac versions <= RTL_GIGA_MAC_VER_06.

[The change above makes sense for the 8101/8102 too -- Ueimor]
Signed-off-by: default avatarMarcus Sundberg <marcus@ingate.com>
Signed-off-by: default avatarFrancois Romieu <romieu@fr.zoreil.com>
parent f887cce8
......@@ -1418,8 +1418,10 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
rtl_hw_phy_config(dev);
dprintk("Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
RTL_W8(0x82, 0x01);
if (tp->mac_version <= RTL_GIGA_MAC_VER_06) {
dprintk("Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
RTL_W8(0x82, 0x01);
}
pci_write_config_byte(tp->pci_dev, PCI_LATENCY_TIMER, 0x40);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment