Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2022-02-03

We've added 6 non-merge commits during the last 10 day(s) which contain
a total of 7 files changed, 11 insertions(+), 236 deletions(-).

The main changes are:

1) Fix BPF ringbuf to allocate its area with VM_MAP instead of VM_ALLOC
   flag which otherwise trips over KASAN, from Hou Tao.

2) Fix unresolved symbol warning in resolve_btfids due to LSM callback
   rename, from Alexei Starovoitov.

3) Fix a possible race in inc_misses_counter() when IRQ would trigger
   during counter update, from He Fengqing.

4) Fix tooling infra for cross-building with clang upon probing whether
   gcc provides the standard libraries, from Jean-Philippe Brucker.

5) Fix silent mode build for resolve_btfids, from Nathan Chancellor.

6) Drop unneeded and outdated lirc.h header copy from tooling infra as
   BPF does not require it anymore, from Sean Young.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  tools/resolve_btfids: Do not print any commands when building silently
  bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
  tools: Ignore errors from `which' when searching a GCC toolchain
  tools headers UAPI: remove stale lirc.h
  bpf: Fix possible race in inc_misses_counter
  bpf: Fix renaming task_getsecid_subj->current_getsecid_subj.
====================

Link: https://lore.kernel.org/r/20220203155815.25689-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

kernel/bpf/bpf_lsm.c

@@ -207,7 +207,7 @@ BTF_ID(func, bpf_lsm_socket_socketpair)
 
 BTF_ID(func, bpf_lsm_syslog)
 BTF_ID(func, bpf_lsm_task_alloc)
-BTF_ID(func, bpf_lsm_task_getsecid_subj)
+BTF_ID(func, bpf_lsm_current_getsecid_subj)
 BTF_ID(func, bpf_lsm_task_getsecid_obj)
 BTF_ID(func, bpf_lsm_task_prctl)
 BTF_ID(func, bpf_lsm_task_setscheduler)

kernel/bpf/ringbuf.c

@@ -104,7 +104,7 @@ static struct bpf_ringbuf *bpf_ringbuf_area_alloc(size_t data_sz, int numa_node)
 	}
 
 	rb = vmap(pages, nr_meta_pages + 2 * nr_data_pages,
-		  VM_ALLOC | VM_USERMAP, PAGE_KERNEL);
+		  VM_MAP | VM_USERMAP, PAGE_KERNEL);
 	if (rb) {
 		kmemleak_not_leak(pages);
 		rb->pages = pages;

kernel/bpf/trampoline.c

@@ -550,11 +550,12 @@ static __always_inline u64 notrace bpf_prog_start_time(void)
 static void notrace inc_misses_counter(struct bpf_prog *prog)
 {
 	struct bpf_prog_stats *stats;
+	unsigned int flags;
 
 	stats = this_cpu_ptr(prog->stats);
-	u64_stats_update_begin(&stats->syncp);
+	flags = u64_stats_update_begin_irqsave(&stats->syncp);
 	u64_stats_inc(&stats->misses);
-	u64_stats_update_end(&stats->syncp);
+	u64_stats_update_end_irqrestore(&stats->syncp, flags);
 }
 
 /* The logic is similar to bpf_prog_run(), but with an explicit

tools/bpf/resolve_btfids/Makefile

@@ -9,7 +9,11 @@ ifeq ($(V),1)
   msg =
 else
   Q = @
-  msg = @printf '  %-8s %s%s\n' "$(1)" "$(notdir $(2))" "$(if $(3), $(3))";
+  ifeq ($(silent),1)
+    msg =
+  else
+    msg = @printf '  %-8s %s%s\n' "$(1)" "$(notdir $(2))" "$(if $(3), $(3))";
+  endif
   MAKEFLAGS=--no-print-directory
 endif
 

tools/include/uapi/linux/lirc.h

-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * lirc.h - linux infrared remote control header file
- * last modified 2010/07/13 by Jarod Wilson
- */
-
-#ifndef _LINUX_LIRC_H
-#define _LINUX_LIRC_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-#define PULSE_BIT       0x01000000
-#define PULSE_MASK      0x00FFFFFF
-
-#define LIRC_MODE2_SPACE     0x00000000
-#define LIRC_MODE2_PULSE     0x01000000
-#define LIRC_MODE2_FREQUENCY 0x02000000
-#define LIRC_MODE2_TIMEOUT   0x03000000
-
-#define LIRC_VALUE_MASK      0x00FFFFFF
-#define LIRC_MODE2_MASK      0xFF000000
-
-#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
-#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
-#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
-#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
-
-#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK)
-#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK)
-
-#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE)
-#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE)
-#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
-#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
-
-/* used heavily by lirc userspace */
-#define lirc_t int
-
-/*** lirc compatible hardware features ***/
-
-#define LIRC_MODE2SEND(x) (x)
-#define LIRC_SEND2MODE(x) (x)
-#define LIRC_MODE2REC(x) ((x) << 16)
-#define LIRC_REC2MODE(x) ((x) >> 16)
-
-#define LIRC_MODE_RAW                  0x00000001
-#define LIRC_MODE_PULSE                0x00000002
-#define LIRC_MODE_MODE2                0x00000004
-#define LIRC_MODE_SCANCODE             0x00000008
-#define LIRC_MODE_LIRCCODE             0x00000010
-
-
-#define LIRC_CAN_SEND_RAW              LIRC_MODE2SEND(LIRC_MODE_RAW)
-#define LIRC_CAN_SEND_PULSE            LIRC_MODE2SEND(LIRC_MODE_PULSE)
-#define LIRC_CAN_SEND_MODE2            LIRC_MODE2SEND(LIRC_MODE_MODE2)
-#define LIRC_CAN_SEND_LIRCCODE         LIRC_MODE2SEND(LIRC_MODE_LIRCCODE)
-
-#define LIRC_CAN_SEND_MASK             0x0000003f
-
-#define LIRC_CAN_SET_SEND_CARRIER      0x00000100
-#define LIRC_CAN_SET_SEND_DUTY_CYCLE   0x00000200
-#define LIRC_CAN_SET_TRANSMITTER_MASK  0x00000400
-
-#define LIRC_CAN_REC_RAW               LIRC_MODE2REC(LIRC_MODE_RAW)
-#define LIRC_CAN_REC_PULSE             LIRC_MODE2REC(LIRC_MODE_PULSE)
-#define LIRC_CAN_REC_MODE2             LIRC_MODE2REC(LIRC_MODE_MODE2)
-#define LIRC_CAN_REC_SCANCODE          LIRC_MODE2REC(LIRC_MODE_SCANCODE)
-#define LIRC_CAN_REC_LIRCCODE          LIRC_MODE2REC(LIRC_MODE_LIRCCODE)
-
-#define LIRC_CAN_REC_MASK              LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
-
-#define LIRC_CAN_SET_REC_CARRIER       (LIRC_CAN_SET_SEND_CARRIER << 16)
-#define LIRC_CAN_SET_REC_DUTY_CYCLE    (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16)
-
-#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000
-#define LIRC_CAN_SET_REC_CARRIER_RANGE    0x80000000
-#define LIRC_CAN_GET_REC_RESOLUTION       0x20000000
-#define LIRC_CAN_SET_REC_TIMEOUT          0x10000000
-#define LIRC_CAN_SET_REC_FILTER           0x08000000
-
-#define LIRC_CAN_MEASURE_CARRIER          0x02000000
-#define LIRC_CAN_USE_WIDEBAND_RECEIVER    0x04000000
-
-#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
-#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
-
-#define LIRC_CAN_NOTIFY_DECODE            0x01000000
-
-/*** IOCTL commands for lirc driver ***/
-
-#define LIRC_GET_FEATURES              _IOR('i', 0x00000000, __u32)
-
-#define LIRC_GET_SEND_MODE             _IOR('i', 0x00000001, __u32)
-#define LIRC_GET_REC_MODE              _IOR('i', 0x00000002, __u32)
-#define LIRC_GET_REC_RESOLUTION        _IOR('i', 0x00000007, __u32)
-
-#define LIRC_GET_MIN_TIMEOUT           _IOR('i', 0x00000008, __u32)
-#define LIRC_GET_MAX_TIMEOUT           _IOR('i', 0x00000009, __u32)
-
-/* code length in bits, currently only for LIRC_MODE_LIRCCODE */
-#define LIRC_GET_LENGTH                _IOR('i', 0x0000000f, __u32)
-
-#define LIRC_SET_SEND_MODE             _IOW('i', 0x00000011, __u32)
-#define LIRC_SET_REC_MODE              _IOW('i', 0x00000012, __u32)
-/* Note: these can reset the according pulse_width */
-#define LIRC_SET_SEND_CARRIER          _IOW('i', 0x00000013, __u32)
-#define LIRC_SET_REC_CARRIER           _IOW('i', 0x00000014, __u32)
-#define LIRC_SET_SEND_DUTY_CYCLE       _IOW('i', 0x00000015, __u32)
-#define LIRC_SET_TRANSMITTER_MASK      _IOW('i', 0x00000017, __u32)
-
-/*
- * when a timeout != 0 is set the driver will send a
- * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is
- * never sent, timeout is disabled by default
- */
-#define LIRC_SET_REC_TIMEOUT           _IOW('i', 0x00000018, __u32)
-
-/* 1 enables, 0 disables timeout reports in MODE2 */
-#define LIRC_SET_REC_TIMEOUT_REPORTS   _IOW('i', 0x00000019, __u32)
-
-/*
- * if enabled from the next key press on the driver will send
- * LIRC_MODE2_FREQUENCY packets
- */
-#define LIRC_SET_MEASURE_CARRIER_MODE	_IOW('i', 0x0000001d, __u32)
-
-/*
- * to set a range use LIRC_SET_REC_CARRIER_RANGE with the
- * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound
- */
-#define LIRC_SET_REC_CARRIER_RANGE     _IOW('i', 0x0000001f, __u32)
-
-#define LIRC_SET_WIDEBAND_RECEIVER     _IOW('i', 0x00000023, __u32)
-
-/*
- * Return the recording timeout, which is either set by
- * the ioctl LIRC_SET_REC_TIMEOUT or by the kernel after setting the protocols.
- */
-#define LIRC_GET_REC_TIMEOUT	       _IOR('i', 0x00000024, __u32)
-
-/*
- * struct lirc_scancode - decoded scancode with protocol for use with
- *	LIRC_MODE_SCANCODE
- *
- * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR
- *	was decoded.
- * @flags: should be 0 for transmit. When receiving scancodes,
- *	LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set
- *	depending on the protocol
- * @rc_proto: see enum rc_proto
- * @keycode: the translated keycode. Set to 0 for transmit.
- * @scancode: the scancode received or to be sent
- */
-struct lirc_scancode {
-	__u64	timestamp;
-	__u16	flags;
-	__u16	rc_proto;
-	__u32	keycode;
-	__u64	scancode;
-};
-
-/* Set if the toggle bit of rc-5 or rc-6 is enabled */
-#define LIRC_SCANCODE_FLAG_TOGGLE	1
-/* Set if this is a nec or sanyo repeat */
-#define LIRC_SCANCODE_FLAG_REPEAT	2
-
-/**
- * enum rc_proto - the Remote Controller protocol
- *
- * @RC_PROTO_UNKNOWN: Protocol not known
- * @RC_PROTO_OTHER: Protocol known but proprietary
- * @RC_PROTO_RC5: Philips RC5 protocol
- * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol
- * @RC_PROTO_RC5_SZ: StreamZap variant of RC5
- * @RC_PROTO_JVC: JVC protocol
- * @RC_PROTO_SONY12: Sony 12 bit protocol
- * @RC_PROTO_SONY15: Sony 15 bit protocol
- * @RC_PROTO_SONY20: Sony 20 bit protocol
- * @RC_PROTO_NEC: NEC protocol
- * @RC_PROTO_NECX: Extended NEC protocol
- * @RC_PROTO_NEC32: NEC 32 bit protocol
- * @RC_PROTO_SANYO: Sanyo protocol
- * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard
- * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse
- * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol
- * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol
- * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol
- * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol
- * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol
- * @RC_PROTO_SHARP: Sharp protocol
- * @RC_PROTO_XMP: XMP protocol
- * @RC_PROTO_CEC: CEC protocol
- * @RC_PROTO_IMON: iMon Pad protocol
- * @RC_PROTO_RCMM12: RC-MM protocol 12 bits
- * @RC_PROTO_RCMM24: RC-MM protocol 24 bits
- * @RC_PROTO_RCMM32: RC-MM protocol 32 bits
- */
-enum rc_proto {
-	RC_PROTO_UNKNOWN	= 0,
-	RC_PROTO_OTHER		= 1,
-	RC_PROTO_RC5		= 2,
-	RC_PROTO_RC5X_20	= 3,
-	RC_PROTO_RC5_SZ		= 4,
-	RC_PROTO_JVC		= 5,
-	RC_PROTO_SONY12		= 6,
-	RC_PROTO_SONY15		= 7,
-	RC_PROTO_SONY20		= 8,
-	RC_PROTO_NEC		= 9,
-	RC_PROTO_NECX		= 10,
-	RC_PROTO_NEC32		= 11,
-	RC_PROTO_SANYO		= 12,
-	RC_PROTO_MCIR2_KBD	= 13,
-	RC_PROTO_MCIR2_MSE	= 14,
-	RC_PROTO_RC6_0		= 15,
-	RC_PROTO_RC6_6A_20	= 16,
-	RC_PROTO_RC6_6A_24	= 17,
-	RC_PROTO_RC6_6A_32	= 18,
-	RC_PROTO_RC6_MCE	= 19,
-	RC_PROTO_SHARP		= 20,
-	RC_PROTO_XMP		= 21,
-	RC_PROTO_CEC		= 22,
-	RC_PROTO_IMON		= 23,
-	RC_PROTO_RCMM12		= 24,
-	RC_PROTO_RCMM24		= 25,
-	RC_PROTO_RCMM32		= 26,
-};
-
-#endif

tools/scripts/Makefile.include

@@ -90,7 +90,7 @@ EXTRA_WARNINGS += -Wstrict-aliasing=3
 
 else ifneq ($(CROSS_COMPILE),)
 CLANG_CROSS_FLAGS := --target=$(notdir $(CROSS_COMPILE:%-=%))
-GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE)gcc))
+GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE)gcc 2>/dev/null))
 ifneq ($(GCC_TOOLCHAIN_DIR),)
 CLANG_CROSS_FLAGS += --prefix=$(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE))
 CLANG_CROSS_FLAGS += --sysroot=$(shell $(CROSS_COMPILE)gcc -print-sysroot)

tools/testing/selftests/bpf/test_lirc_mode2_user.c

@@ -28,7 +28,6 @@
 // 5. We can read keycode from same /dev/lirc device
 
 #include <linux/bpf.h>
-#include <linux/lirc.h>
 #include <linux/input.h>
 #include <errno.h>
 #include <stdio.h>