Commit 77c2061d authored by Walter Goldens's avatar Walter Goldens Committed by John W. Linville

wireless: fix several minor description typos

Signed-off-by: default avatarWalter Goldens <goldenstranger@yahoo.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent aed8e1f9
......@@ -715,7 +715,7 @@ ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode,
/* Only one curve for RF5111
* find out which one and place
* in in pd_curves.
* in pd_curves.
* Note: ee_x_gain is reversed here */
for (idx = 0; idx < AR5K_EEPROM_N_PD_CURVES; idx++) {
......
......@@ -461,7 +461,7 @@ struct ath9k_hw_version {
#define AR_GENTMR_BIT(_index) (1 << (_index))
/*
* Using de Bruijin sequence to to look up 1's index in a 32 bit number
* Using de Bruijin sequence to look up 1's index in a 32 bit number
* debruijn32 = 0000 0111 0111 1100 1011 0101 0011 0001
*/
#define debruijn32 0x077CB531U
......
......@@ -54,7 +54,7 @@
* LMAC. If you look at LMAC commands you'll se that they
* are actually regular iwlwifi target commands encapsulated
* into a special UMAC command called UMAC passthrough.
* This is due to the fact the the host talks exclusively
* This is due to the fact the host talks exclusively
* to the UMAC and so there needs to be a special UMAC
* command for talking to the LMAC.
* This is how a wifi command is layed out:
......
......@@ -666,7 +666,7 @@ void lbs_scan_worker(struct work_struct *work)
/**
* @brief Interpret a BSS scan response returned from the firmware
*
* Parse the various fixed fields and IEs passed back for a a BSS probe
* Parse the various fixed fields and IEs passed back for a BSS probe
* response or beacon from the scan command. Record information as needed
* in the scan table struct bss_descriptor for that entry.
*
......
......@@ -68,7 +68,7 @@ struct dblock {
} __attribute__ ((packed));
/*
* Plug Data References are located in in the image after the last data
* Plug Data References are located in the image after the last data
* block. They refer to areas in the adapter memory where the plug data
* items with matching ID should be written.
*/
......
......@@ -224,7 +224,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
/*
* If the IV/EIV data was stripped from the frame before it was
* passed to the hardware, we should now reinsert it again because
* mac80211 will expect the the same data to be present it the
* mac80211 will expect the same data to be present it the
* frame as it was passed to us.
*/
if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
......
......@@ -855,7 +855,7 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length)
if (skb == NULL)
return -ENOMEM;
if (need_padding) {
/* Make sure the the payload data is 4 byte aligned. */
/* Make sure the payload data is 4 byte aligned. */
skb_reserve(skb, 2);
}
......
......@@ -844,7 +844,7 @@ static struct urb *alloc_tx_urb(struct zd_usb *usb)
* @usb: a &struct zd_usb pointer
* @urb: URB to be freed
*
* Frees the the transmission URB, which means to put it on the free URB
* Frees the transmission URB, which means to put it on the free URB
* list.
*/
static void free_tx_urb(struct zd_usb *usb, struct urb *urb)
......
......@@ -132,7 +132,7 @@
* %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
* %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
* @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
* to the the specified ISO/IEC 3166-1 alpha2 country code. The core will
* to the specified ISO/IEC 3166-1 alpha2 country code. The core will
* store this as a valid request and then query userspace for it.
*
* @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the
......
......@@ -89,7 +89,7 @@ enum ieee80211_channel_flags {
* @max_power: maximum transmission power (in dBm)
* @beacon_found: helper to regulatory code to indicate when a beacon
* has been found on this channel. Use regulatory_hint_found_beacon()
* to enable this, this is is useful only on 5 GHz band.
* to enable this, this is useful only on 5 GHz band.
* @orig_mag: internal use
* @orig_mpwr: internal use
*/
......
......@@ -1763,7 +1763,7 @@ static void ieee80211_sta_work(struct work_struct *work)
/*
* ieee80211_queue_work() should have picked up most cases,
* here we'll pick the the rest.
* here we'll pick the rest.
*/
if (WARN(local->suspended, "STA MLME work scheduled while "
"going to suspend\n"))
......
......@@ -47,7 +47,7 @@ static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
/*
* This skb 'survived' a round-trip through the driver, and
* hopefully the driver didn't mangle it too badly. However,
* we can definitely not rely on the the control information
* we can definitely not rely on the control information
* being correct. Clear it so we don't get junk there, and
* indicate that it needs new processing, but must not be
* modified/encrypted again.
......
......@@ -840,7 +840,7 @@ static void ieee80211_work_work(struct work_struct *work)
/*
* ieee80211_queue_work() should have picked up most cases,
* here we'll pick the the rest.
* here we'll pick the rest.
*/
if (WARN(local->suspended, "work scheduled while going to suspend\n"))
return;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment