USB: cxacru.c: remove dbg() usage

dbg() was a very old USB-specific macro that should no longer
be used. This patch removes it from being used in the driver
and uses dev_dbg() instead.

CC: Simon Arlott <cxacru@fire.lp0.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/atm/cxacru.c

@@ -674,7 +674,7 @@ static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
 	}
 
 	ret = offd;
-	dbg("cm %#x", cm);
+	usb_dbg(instance->usbatm, "cm %#x\n", cm);
 fail:
 	mutex_unlock(&instance->cm_serialize);
 err:
@@ -733,7 +733,7 @@ static int cxacru_card_status(struct cxacru_data *instance)
 {
 	int ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0);
 	if (ret < 0) {		/* firmware not loaded */
-		dbg("cxacru_adsl_start: CARD_GET_STATUS returned %d", ret);
+		usb_dbg(instance->usbatm, "cxacru_adsl_start: CARD_GET_STATUS returned %d\n", ret);
 		return ret;
 	}
 	return 0;
@@ -758,7 +758,7 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
 	int ret;
 	int start_polling = 1;
 
-	dbg("cxacru_atm_start");
+	dev_dbg(&intf->dev, "%s\n", __func__);
 
 	/* Read MAC address */
 	ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_MAC_ADDRESS, NULL, 0,
@@ -962,13 +962,13 @@ static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw,
 			ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD),
 					   buf, offb, NULL, CMD_TIMEOUT);
 			if (ret < 0) {
-				dbg("sending fw %#x failed", fw);
+				dev_dbg(&usb_dev->dev, "sending fw %#x failed\n", fw);
 				goto cleanup;
 			}
 			offb = 0;
 		}
 	} while (offd < size);
-	dbg("sent fw %#x", fw);
+	dev_dbg(&usb_dev->dev, "sent fw %#x\n", fw);
 
 	ret = 0;
 
@@ -988,7 +988,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance,
 			       usb_dev->descriptor.idProduct };
 	__le32 val;
 
-	dbg("cxacru_upload_firmware");
+	usb_dbg(usbatm, "%s\n", __func__);
 
 	/* FirmwarePllFClkValue */
 	val = cpu_to_le32(instance->modem_type->pll_f_clk);
@@ -1074,7 +1074,7 @@ static int cxacru_find_firmware(struct cxacru_data *instance,
 	char buf[16];
 
 	sprintf(buf, "cxacru-%s.bin", phase);
-	dbg("cxacru_find_firmware: looking for %s", buf);
+	usb_dbg(usbatm, "cxacru_find_firmware: looking for %s\n", buf);
 
 	if (request_firmware(fw_p, buf, dev)) {
 		usb_dbg(usbatm, "no stage %s firmware found\n", phase);
@@ -1115,9 +1115,9 @@ static int cxacru_heavy_init(struct usbatm_data *usbatm_instance,
 
 	ret = cxacru_card_status(instance);
 	if (ret)
-		dbg("modem initialisation failed");
+		usb_dbg(usbatm_instance, "modem initialisation failed\n");
 	else
-		dbg("done setting up the modem");
+		usb_dbg(usbatm_instance, "done setting up the modem\n");
 
 	return ret;
 }
@@ -1133,7 +1133,7 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
 	/* instance init */
 	instance = kzalloc(sizeof(*instance), GFP_KERNEL);
 	if (!instance) {
-		dbg("cxacru_bind: no memory for instance data");
+		usb_dbg(usbatm_instance, "cxacru_bind: no memory for instance data\n");
 		return -ENOMEM;
 	}
 
@@ -1149,31 +1149,31 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
 
 	instance->rcv_buf = (u8 *) __get_free_page(GFP_KERNEL);
 	if (!instance->rcv_buf) {
-		dbg("cxacru_bind: no memory for rcv_buf");
+		usb_dbg(usbatm_instance, "cxacru_bind: no memory for rcv_buf\n");
 		ret = -ENOMEM;
 		goto fail;
 	}
 	instance->snd_buf = (u8 *) __get_free_page(GFP_KERNEL);
 	if (!instance->snd_buf) {
-		dbg("cxacru_bind: no memory for snd_buf");
+		usb_dbg(usbatm_instance, "cxacru_bind: no memory for snd_buf\n");
 		ret = -ENOMEM;
 		goto fail;
 	}
 	instance->rcv_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!instance->rcv_urb) {
-		dbg("cxacru_bind: no memory for rcv_urb");
+		usb_dbg(usbatm_instance, "cxacru_bind: no memory for rcv_urb\n");
 		ret = -ENOMEM;
 		goto fail;
 	}
 	instance->snd_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!instance->snd_urb) {
-		dbg("cxacru_bind: no memory for snd_urb");
+		usb_dbg(usbatm_instance, "cxacru_bind: no memory for snd_urb\n");
 		ret = -ENOMEM;
 		goto fail;
 	}
 
 	if (!cmd_ep) {
-		dbg("cxacru_bind: no command endpoint");
+		usb_dbg(usbatm_instance, "cxacru_bind: no command endpoint\n");
 		ret = -ENODEV;
 		goto fail;
 	}
@@ -1227,10 +1227,10 @@ static void cxacru_unbind(struct usbatm_data *usbatm_instance,
 	struct cxacru_data *instance = usbatm_instance->driver_data;
 	int is_polling = 1;
 
-	dbg("cxacru_unbind entered");
+	usb_dbg(usbatm_instance, "cxacru_unbind entered\n");
 
 	if (!instance) {
-		dbg("cxacru_unbind: NULL instance!");
+		usb_dbg(usbatm_instance, "cxacru_unbind: NULL instance!\n");
 		return;
 	}