Commit b741ab9d authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

USB: usbtouchscreen.c: remove dbg() usage

dbg() was a very old USB-specific macro that should no longer
be used. This patch removes it from being used in the driver
and uses dev_dbg() instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Henrik Rydberg <rydberg@euromail.se>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Viresh Kumar <viresh.kumar@st.com>
CC: Armando Visconti <armando.visconti@st.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 6d0f7dcb
......@@ -269,8 +269,9 @@ static int e2i_init(struct usbtouch_usb *usbtouch)
0x01, 0x02, 0x0000, 0x0081,
NULL, 0, USB_CTRL_SET_TIMEOUT);
dbg("%s - usb_control_msg - E2I_RESET - bytes|err: %d",
__func__, ret);
dev_dbg(&usbtouch->input->dev,
"%s - usb_control_msg - E2I_RESET - bytes|err: %d\n",
__func__, ret);
return ret;
}
......@@ -425,8 +426,9 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
MTOUCHUSB_RESET,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d",
__func__, ret);
dev_dbg(&usbtouch->input->dev,
"%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d\n",
__func__, ret);
if (ret < 0)
return ret;
msleep(150);
......@@ -436,8 +438,9 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
MTOUCHUSB_ASYNC_REPORT,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
__func__, ret);
dev_dbg(&usbtouch->input->dev,
"%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d\n",
__func__, ret);
if (ret >= 0)
break;
if (ret != -EPIPE)
......@@ -737,27 +740,29 @@ static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
struct input_dev *input = dev->input;
switch (pkt[0]) {
case 0x3A: /* command response */
dbg("%s: Command response %d", __func__, pkt[1]);
dev_dbg(&input->dev, "%s: Command response %d\n", __func__, pkt[1]);
break;
case 0xC0: /* down */
dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
dev->touch = 1;
dbg("%s: down %d,%d", __func__, dev->x, dev->y);
dev_dbg(&input->dev, "%s: down %d,%d\n", __func__, dev->x, dev->y);
return 1;
case 0x80: /* up */
dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
dev->touch = 0;
dbg("%s: up %d,%d", __func__, dev->x, dev->y);
dev_dbg(&input->dev, "%s: up %d,%d\n", __func__, dev->x, dev->y);
return 1;
default:
dbg("%s: Unknown return %d", __func__, pkt[0]);
dev_dbg(&input->dev, "%s: Unknown return %d\n", __func__, pkt[0]);
break;
}
......@@ -812,7 +817,8 @@ static int nexio_alloc(struct usbtouch_usb *usbtouch)
priv->ack = usb_alloc_urb(0, GFP_KERNEL);
if (!priv->ack) {
dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__);
dev_dbg(&usbtouch->input->dev,
"%s - usb_alloc_urb failed: usbtouch->ack\n", __func__);
goto err_ack_buf;
}
......@@ -1349,6 +1355,7 @@ static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
static void usbtouch_irq(struct urb *urb)
{
struct usbtouch_usb *usbtouch = urb->context;
struct device *dev = &usbtouch->input->dev;
int retval;
switch (urb->status) {
......@@ -1357,20 +1364,21 @@ static void usbtouch_irq(struct urb *urb)
break;
case -ETIME:
/* this urb is timing out */
dbg("%s - urb timed out - was the device unplugged?",
__func__);
dev_dbg(dev,
"%s - urb timed out - was the device unplugged?\n",
__func__);
return;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
case -EPIPE:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
__func__, urb->status);
dev_dbg(dev, "%s - urb shutting down with status: %d\n",
__func__, urb->status);
return;
default:
dbg("%s - nonzero urb status received: %d",
__func__, urb->status);
dev_dbg(dev, "%s - nonzero urb status received: %d\n",
__func__, urb->status);
goto exit;
}
......@@ -1457,8 +1465,9 @@ static int usbtouch_reset_resume(struct usb_interface *intf)
if (usbtouch->type->init) {
err = usbtouch->type->init(usbtouch);
if (err) {
dbg("%s - type->init() failed, err: %d",
__func__, err);
dev_dbg(&input->dev,
"%s - type->init() failed, err: %d\n",
__func__, err);
return err;
}
}
......@@ -1533,7 +1542,8 @@ static int usbtouch_probe(struct usb_interface *intf,
usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
if (!usbtouch->irq) {
dbg("%s - usb_alloc_urb failed: usbtouch->irq", __func__);
dev_dbg(&intf->dev,
"%s - usb_alloc_urb failed: usbtouch->irq\n", __func__);
goto out_free_buffers;
}
......@@ -1595,7 +1605,9 @@ static int usbtouch_probe(struct usb_interface *intf,
if (type->alloc) {
err = type->alloc(usbtouch);
if (err) {
dbg("%s - type->alloc() failed, err: %d", __func__, err);
dev_dbg(&intf->dev,
"%s - type->alloc() failed, err: %d\n",
__func__, err);
goto out_free_urb;
}
}
......@@ -1604,14 +1616,18 @@ static int usbtouch_probe(struct usb_interface *intf,
if (type->init) {
err = type->init(usbtouch);
if (err) {
dbg("%s - type->init() failed, err: %d", __func__, err);
dev_dbg(&intf->dev,
"%s - type->init() failed, err: %d\n",
__func__, err);
goto out_do_exit;
}
}
err = input_register_device(usbtouch->input);
if (err) {
dbg("%s - input_register_device failed, err: %d", __func__, err);
dev_dbg(&intf->dev,
"%s - input_register_device failed, err: %d\n",
__func__, err);
goto out_do_exit;
}
......@@ -1652,12 +1668,12 @@ static void usbtouch_disconnect(struct usb_interface *intf)
{
struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
dbg("%s - called", __func__);
if (!usbtouch)
return;
dbg("%s - usbtouch is initialized, cleaning up", __func__);
dev_dbg(&usbtouch->input->dev,
"%s - usbtouch is initialized, cleaning up\n", __func__);
usb_set_intfdata(intf, NULL);
/* this will stop IO via close */
input_unregister_device(usbtouch->input);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment