Merge tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "The bulk of the changes this time are for device tree files in the
  rockchips platform, addressing correctness issues on individual
  boards, plus one change in the rk356x SoC file to make it match the
  binding.

  The only other changes that came in are

   - a CPU frequencey scaling fix for JH7110 (RISC-V)

   - a build fix for the cznic hwrandom driver

   - a fix for a deadlock in qualcomm uefi secure application firmware
     driver"

* tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependency
  riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
  firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
  arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
  dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
  arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
  arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
  arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
  arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x

Documentation/devicetree/bindings/soc/rockchip/grf.yaml

@@ -31,10 +31,16 @@ properties:
               - rockchip,rk3588-pcie3-pipe-grf
               - rockchip,rk3588-usb-grf
               - rockchip,rk3588-usbdpphy-grf
-              - rockchip,rk3588-vo-grf
+              - rockchip,rk3588-vo0-grf
+              - rockchip,rk3588-vo1-grf
               - rockchip,rk3588-vop-grf
               - rockchip,rv1108-usbgrf
           - const: syscon
+      - items:
+          - const: rockchip,rk3588-vo-grf
+          - const: syscon
+        deprecated: true
+        description: Use rockchip,rk3588-vo{0,1}-grf instead.
       - items:
           - enum:
               - rockchip,px30-grf
@@ -262,6 +268,8 @@ allOf:
           contains:
             enum:
               - rockchip,rk3588-vo-grf
+              - rockchip,rk3588-vo0-grf
+              - rockchip,rk3588-vo1-grf
 
     then:
       required:

arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts

@@ -387,7 +387,7 @@ led_pin: led-pin {
 
 	pmic {
 		pmic_int_l: pmic-int-l {
-			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 

arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi

@@ -154,6 +154,22 @@ bios-disable-hog {
 	};
 };
 
+&gpio3 {
+	/*
+	 * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
+	 * eMMC and SPI flash powered-down initially (in fact it keeps the
+	 * reset signal asserted). BIOS_DISABLE_OVERRIDE pin allows to override
+	 * that signal so that eMMC and SPI can be used regardless of the state
+	 * of the signal.
+	 */
+	bios-disable-override-hog {
+		gpios = <RK_PD5 GPIO_ACTIVE_LOW>;
+		gpio-hog;
+		line-name = "bios_disable_override";
+		output-high;
+	};
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
 	assigned-clock-parents = <&clkin_gmac>;
@@ -409,6 +425,7 @@ vdd_cpu_b: regulator@60 {
 
 &i2s0 {
 	pinctrl-0 = <&i2s0_2ch_bus>;
+	pinctrl-1 = <&i2s0_2ch_bus_bclk_off>;
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
 	status = "okay";
@@ -417,8 +434,8 @@ &i2s0 {
 /*
  * As Q7 does not specify neither a global nor a RX clock for I2S these
  * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO.
- * Therefore we have to redefine the i2s0_2ch_bus definition to prevent
- * conflicts.
+ * Therefore we have to redefine the i2s0_2ch_bus and i2s0_2ch_bus_bclk_off
+ * definitions to prevent conflicts.
  */
 &i2s0_2ch_bus {
 	rockchip,pins =
@@ -428,6 +445,14 @@ &i2s0_2ch_bus {
 		<3 RK_PD7 1 &pcfg_pull_none>;
 };
 
+&i2s0_2ch_bus_bclk_off {
+	rockchip,pins =
+		<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
+		<3 RK_PD2 1 &pcfg_pull_none>,
+		<3 RK_PD3 1 &pcfg_pull_none>,
+		<3 RK_PD7 1 &pcfg_pull_none>;
+};
+
 &io_domains {
 	status = "okay";
 	bt656-supply = <&vcc_1v8>;
@@ -449,9 +474,14 @@ &pcie_clkreqn_cpm {
 
 &pinctrl {
 	pinctrl-names = "default";
-	pinctrl-0 = <&q7_thermal_pin>;
+	pinctrl-0 = <&q7_thermal_pin &bios_disable_override_hog_pin>;
 
 	gpios {
+		bios_disable_override_hog_pin: bios-disable-override-hog-pin {
+			rockchip,pins =
+				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
 		q7_thermal_pin: q7-thermal-pin {
 			rockchip,pins =
 				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;

arch/arm64/boot/dts/rockchip/rk356x.dtsi

@@ -1592,10 +1592,9 @@ tsadc: tsadc@fe710000 {
 			 <&cru SRST_TSADCPHY>;
 		rockchip,grf = <&grf>;
 		rockchip,hw-tshut-temp = <95000>;
-		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&tsadc_pin>;
-		pinctrl-1 = <&tsadc_shutorg>;
-		pinctrl-2 = <&tsadc_pin>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&tsadc_shutorg>;
+		pinctrl-1 = <&tsadc_pin>;
 		#thermal-sensor-cells = <1>;
 		status = "disabled";
 	};

arch/arm64/boot/dts/rockchip/rk3588-base.dtsi

@@ -582,14 +582,14 @@ vop_grf: syscon@fd5a4000 {
 	};
 
 	vo0_grf: syscon@fd5a6000 {
-		compatible = "rockchip,rk3588-vo-grf", "syscon";
+		compatible = "rockchip,rk3588-vo0-grf", "syscon";
 		reg = <0x0 0xfd5a6000 0x0 0x2000>;
 		clocks = <&cru PCLK_VO0GRF>;
 	};
 
 	vo1_grf: syscon@fd5a8000 {
-		compatible = "rockchip,rk3588-vo-grf", "syscon";
-		reg = <0x0 0xfd5a8000 0x0 0x100>;
+		compatible = "rockchip,rk3588-vo1-grf", "syscon";
+		reg = <0x0 0xfd5a8000 0x0 0x4000>;
 		clocks = <&cru PCLK_VO1GRF>;
 	};
 

arch/riscv/boot/dts/starfive/jh7110-common.dtsi

@@ -365,6 +365,12 @@ spi_dev0: spi@0 {
 	};
 };
 
+&syscrg {
+	assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>,
+			  <&pllclk JH7110_PLLCLK_PLL0_OUT>;
+	assigned-clock-rates = <500000000>, <1500000000>;
+};
+
 &sysgpio {
 	i2c0_pins: i2c0-0 {
 		i2c-pins {

drivers/firmware/qcom/qcom_qseecom_uefisecapp.c

@@ -715,6 +715,10 @@ static int qcuefi_set_reference(struct qcuefi_client *qcuefi)
 static struct qcuefi_client *qcuefi_acquire(void)
 {
 	mutex_lock(&__qcuefi_lock);
+	if (!__qcuefi) {
+		mutex_unlock(&__qcuefi_lock);
+		return NULL;
+	}
 	return __qcuefi;
 }
 

drivers/platform/cznic/Kconfig

@@ -70,7 +70,7 @@ config TURRIS_OMNIA_MCU_TRNG
 	bool "Turris Omnia MCU true random number generator"
 	default y
 	depends on TURRIS_OMNIA_MCU_GPIO
-	depends on HW_RANDOM
+	depends on HW_RANDOM=y || HW_RANDOM=TURRIS_OMNIA_MCU
 	help
 	  Say Y here to add support for the true random number generator
 	  provided by CZ.NIC's Turris Omnia MCU.