[PATCH] Remove duplicate config.help

(is already in drivers/char/agp/Config.help)

drivers/char/Config.help

@@ -40,93 +40,6 @@ CONFIG_MWAVE
   The module will be called mwave.o. If you want to compile it as
   a module, say M here and read Documentation/modules.txt.
 
-CONFIG_AGP
-  AGP (Accelerated Graphics Port) is a bus system mainly used to
-  connect graphics cards to the rest of the system.
-
-  If you have an AGP system and you say Y here, it will be possible to
-  use the AGP features of your 3D rendering video card. This code acts
-  as a sort of "AGP driver" for the motherboard's chipset.
-
-  If you need more texture memory than you can get with the AGP GART
-  (theoretically up to 256 MB, but in practice usually 64 or 128 MB
-  due to kernel allocation issues), you could use PCI accesses
-  and have up to a couple gigs of texture space.
-
-  Note that this is the only means to have XFree4/GLX use
-  write-combining with MTRR support on the AGP bus. Without it, OpenGL
-  direct rendering will be a lot slower but still faster than PIO.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-  This driver is available as a module.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.  The
-  module will be called agpgart.o.
-
-CONFIG_AGP_INTEL
-  This option gives you AGP support for the GLX component of the
-  XFree86 4.x on Intel 440LX/BX/GX, 815, 820, 830, 840, 845, 850 and 860 chipsets.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-CONFIG_AGP_I810
-  This option gives you AGP support for the Xserver on the Intel 810
-  815 and 830m chipset boards for their on-board integrated graphics. This
-  is required to do any useful video modes with these boards.
-
-CONFIG_AGP_I460
-  This option gives you AGP GART support for the Intel 460GX chipset
-  for IA64 processors.
-
-CONFIG_AGP_VIA
-  This option gives you AGP support for the GLX component of the
-  XFree86 4.x on VIA MPV3/Apollo Pro chipsets.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-CONFIG_AGP_AMD
-  This option gives you AGP support for the GLX component of the
-  XFree86 4.x on AMD Irongate, 761, and 762 chipsets.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-CONFIG_AGP_SIS
-  This option gives you AGP support for the GLX component of the "soon
-  to be released" XFree86 4.x on Silicon Integrated Systems [SiS]
-  chipsets.
-
-  Note that 5591/5592 AGP chipsets are NOT supported.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-CONFIG_AGP_SWORKS
-  Say Y here to support the Serverworks AGP card.  See 
-  <http://www.serverworks.com/> for product descriptions and images.
-
-CONFIG_AGP_ALI
-  This option gives you AGP support for the GLX component of the
-  XFree86 4.x on the following ALi chipsets.  The supported chipsets
-  include M1541, M1621, M1631, M1632, M1641,M1647,and M1651.
-  For the ALi-chipset question, ALi suggests you refer to
-  <http://www.ali.com.tw/eng/support/index.shtml>.
-
-  The M1541 chipset can do AGP 1x and 2x, but note that there is an
-  acknowledged incompatibility with Matrox G200 cards. Due to
-  timing issues, this chipset cannot do AGP 2x with the G200.
-  This is a hardware limitation. AGP 1x seems to be fine, though.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-CONFIG_AGP_HP_ZX1
-  This option gives you AGP GART support for the HP ZX1 chipset
-  for IA64 processors.
-
 CONFIG_I810_TCO
   Hardware driver for the TCO timer built into the Intel i810 and i815
   chipset family.  The TCO (Total Cost of Ownership) timer is a