Merge tag 'docs-4.15' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "A relatively calm cycle for the docs tree again.

  - The old driver statement has been added to the kernel docs.

  - We have a couple of new helper scripts. find-unused-docs.sh from
    Sayli Karnic will point out kerneldoc comments that are not actually
    used in the documentation. Jani Nikula's
    documentation-file-ref-check finds references to non-existing files.

  - A new ftrace document from Steve Rostedt.

  - Vinod Koul converted the dmaengine docs to RST

  Beyond that, it's mostly simple fixes.

  This set reaches outside of Documentation/ a bit more than most. In
  all cases, the changes are to comment docs, mostly from Randy, in
  places where there didn't seem to be anybody better to take them"

* tag 'docs-4.15' of git://git.lwn.net/linux: (52 commits)
  documentation: fb: update list of available compiled-in fonts
  MAINTAINERS: update DMAengine documentation location
  dmaengine: doc: ReSTize pxa_dma doc
  dmaengine: doc: ReSTize dmatest doc
  dmaengine: doc: ReSTize client API doc
  dmaengine: doc: ReSTize provider doc
  dmaengine: doc: Add ReST style dmaengine document
  ftrace/docs: Add documentation on how to use ftrace from within the kernel
  bug-hunting.rst: Fix an example and a typo in a Sphinx tag
  scripts: Add a script to find unused documentation
  samples: Convert timers to use timer_setup()
  documentation: kernel-api: add more info on bitmap functions
  Documentation: fix selftests related file refs
  Documentation: fix ref to power basic-pm-debugging
  Documentation: fix ref to trace stm content
  Documentation: fix ref to coccinelle content
  Documentation: fix ref to workqueue content
  Documentation: fix ref to sphinx/kerneldoc.py
  Documentation: fix locking rt-mutex doc refs
  docs: dev-tools: correct Coccinelle version number
  ...

Documentation/ABI/stable/sysfs-devices

 # Note: This documents additional properties of any device beyond what
-# is documented in Documentation/sysfs-rules.txt
+# is documented in Documentation/admin-guide/sysfs-rules.rst
 
 What:		/sys/devices/*/of_node
 Date:		February 2015

Documentation/ABI/testing/evm

@@ -18,6 +18,6 @@ Description:
 		in the initramfs, which has already been measured as part
 		of the trusted boot.  For more information on creating and
 		loading existing trusted/encrypted keys, refer to:
-		Documentation/keys-trusted-encrypted.txt.  (A sample dracut
-		patch, which loads the trusted/encrypted key and enables
+		Documentation/security/keys/trusted-encrypted.rst.  (A sample
+		dracut patch, which loads the trusted/encrypted key and enables
 		EVM, is available from http://linux-ima.sourceforge.net/#EVM.)

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -187,7 +187,8 @@ Description:	Processor frequency boosting control
 		This switch controls the boost setting for the whole system.
 		Boosting allows the CPU and the firmware to run at a frequency
 		beyound it's nominal limit.
-		More details can be found in Documentation/cpu-freq/boost.txt
+		More details can be found in
+		Documentation/admin-guide/pm/cpufreq.rst
 
 
 What:		/sys/devices/system/cpu/cpu#/crash_notes
@@ -223,7 +224,8 @@ Description:	Parameters for the Intel P-state driver
 		no_turbo: limits the driver to selecting P states below the turbo
 		frequency range.
 
-		More details can be found in Documentation/cpu-freq/intel-pstate.txt
+		More details can be found in
+		Documentation/admin-guide/pm/intel_pstate.rst
 
 What:		/sys/devices/system/cpu/cpu*/cache/index*/<set_of_attributes_mentioned_below>
 Date:		July 2014(documented, existed before August 2008)

Documentation/ABI/testing/sysfs-power

@@ -18,7 +18,8 @@ Description:
 		Writing one of the above strings to this file causes the system
 		to transition into the corresponding state, if available.
 
-		See Documentation/power/states.txt for more information.
+		See Documentation/admin-guide/pm/sleep-states.rst for more
+		information.
 
 What:		/sys/power/mem_sleep
 Date:		November 2016
@@ -35,7 +36,8 @@ Description:
 		represented by it to be used on subsequent attempts to suspend
 		the system.
 
-		See Documentation/power/states.txt for more information.
+		See Documentation/admin-guide/pm/sleep-states.rst for more
+		information.
 
 What:		/sys/power/disk
 Date:		September 2006

Documentation/Makefile

@@ -97,6 +97,9 @@ endif # HAVE_SPHINX
 # The following targets are independent of HAVE_SPHINX, and the rules should
 # work or silently pass without Sphinx.
 
+refcheckdocs:
+	$(Q)cd $(srctree);scripts/documentation-file-ref-check
+
 cleandocs:
 	$(Q)rm -rf $(BUILDDIR)
 	$(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media clean
@@ -109,6 +112,7 @@ dochelp:
 	@echo  '  epubdocs        - EPUB'
 	@echo  '  xmldocs         - XML'
 	@echo  '  linkcheckdocs   - check for broken external links (will connect to external hosts)'
+	@echo  '  refcheckdocs    - check for references to non-existing files under Documentation'
 	@echo  '  cleandocs       - clean all generated files'
 	@echo
 	@echo  '  make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2'
@@ -116,3 +120,5 @@ dochelp:
 	@echo
 	@echo  '  make SPHINX_CONF={conf-file} [target] use *additional* sphinx-build'
 	@echo  '  configuration. This is e.g. useful to build with nit-picking config.'
+	@echo
+	@echo  '  Default location for the generated documents is Documentation/output'

Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html

@@ -527,7 +527,7 @@ grace period also drove it to completion.
 This straightforward approach had the disadvantage of needing to
 account for POSIX signals sent to user tasks,
 so more recent implemementations use the Linux kernel's
-<a href="https://www.kernel.org/doc/Documentation/workqueue.txt">workqueues</a>.
+<a href="https://www.kernel.org/doc/Documentation/core-api/workqueue.rst">workqueues</a>.
 
 <p>
 The requesting task still does counter snapshotting and funnel-lock

Documentation/admin-guide/README.rst

@@ -350,7 +350,7 @@ If something goes wrong
    help debugging the problem.  The text above the dump is also
    important: it tells something about why the kernel dumped code (in
    the above example, it's due to a bad kernel pointer). More information
-   on making sense of the dump is in Documentation/admin-guide/oops-tracing.rst
+   on making sense of the dump is in Documentation/admin-guide/bug-hunting.rst
 
  - If you compiled the kernel with CONFIG_KALLSYMS you can send the dump
    as is, otherwise you will have to use the ``ksymoops`` program to make

Documentation/admin-guide/bug-hunting.rst

@@ -240,7 +240,7 @@ In order to report it upstream, you should identify the mailing list
 used for the development of the affected code. This can be done by using
 the ``get_maintainer.pl`` script.
 
-For example, if you find a bug at the gspca's conex.c file, you can get
+For example, if you find a bug at the gspca's sonixj.c file, you can get
 their maintainers with::
 
 	$ ./scripts/get_maintainer.pl -f drivers/media/usb/gspca/sonixj.c
@@ -257,7 +257,7 @@ Please notice that it will point to:
   Tejun and Bhaktipriya (in this specific case, none really envolved on the
   development of this file);
 - The driver maintainer (Hans Verkuil);
-- The subsystem maintainer (Mauro Carvalho Chehab)
+- The subsystem maintainer (Mauro Carvalho Chehab);
 - The driver and/or subsystem mailing list (linux-media@vger.kernel.org);
 - the Linux Kernel mailing list (linux-kernel@vger.kernel.org).
 
@@ -274,14 +274,14 @@ Fixing the bug
 --------------
 
 If you know programming, you could help us by not only reporting the bug,
-but also providing us with a solution. After all open source is about
+but also providing us with a solution. After all, open source is about
 sharing what you do and don't you want to be recognised for your genius?
 
 If you decide to take this way, once you have worked out a fix please submit
 it upstream.
 
 Please do read
-ref:`Documentation/process/submitting-patches.rst <submittingpatches>` though
+:ref:`Documentation/process/submitting-patches.rst <submittingpatches>` though
 to help your code get accepted.
 
 

Documentation/admin-guide/kernel-parameters.txt

@@ -314,7 +314,7 @@
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
 			Format: <a>,<b>
-			See also Documentation/input/joystick.txt
+			See also Documentation/input/joydev/joystick.rst
 
 	analog.map=	[HW,JOY] Analog joystick and gamepad support
 			Specifies type or capabilities of an analog joystick
@@ -439,7 +439,7 @@
 	bttv.card=	[HW,V4L] bttv (bt848 + bt878 based grabber cards)
 	bttv.radio=	Most important insmod options are available as
 			kernel args too.
-	bttv.pll=	See Documentation/video4linux/bttv/Insmod-options
+	bttv.pll=	See Documentation/media/v4l-drivers/bttv.rst
 	bttv.tuner=
 
 	bulk_remove=off	[PPC]  This parameter disables the use of the pSeries
@@ -641,8 +641,8 @@
 		For now, only VisioBraille is supported.
 
 	consoleblank=	[KNL] The console blank (screen saver) timeout in
-			seconds. Defaults to 10*60 = 10mins. A value of 0
-			disables the blank timer.
+			seconds. A value of 0 disables the blank timer.
+                       Defaults to 0.
 
 	coredump_filter=
 			[KNL] Change the default value for
@@ -724,7 +724,7 @@
 	db9.dev[2|3]=	[HW,JOY] Multisystem joystick support via parallel port
 			(one device per port)
 			Format: <port#>,<type>
-			See also Documentation/input/joystick-parport.txt
+			See also Documentation/input/devices/joystick-parport.rst
 
 	ddebug_query=   [KNL,DYNAMIC_DEBUG] Enable debug messages at early boot
 			time. See
@@ -1220,7 +1220,7 @@
 			[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
 			support via parallel port (up to 5 devices per port)
 			Format: <port#>,<pad1>,<pad2>,<pad3>,<pad4>,<pad5>
-			See also Documentation/input/joystick-parport.txt
+			See also Documentation/input/devices/joystick-parport.rst
 
 	gamma=		[HW,DRM]
 
@@ -1766,7 +1766,7 @@
 				ivrs_acpihid[00:14.5]=AMD0020:0
 
 	js=		[HW,JOY] Analog joystick
-			See Documentation/input/joystick.txt.
+			See Documentation/input/joydev/joystick.rst.
 
 	nokaslr		[KNL]
 			When CONFIG_RANDOMIZE_BASE is set, this disables
@@ -2248,10 +2248,10 @@
 			s2idle  - Suspend-To-Idle
 			shallow - Power-On Suspend or equivalent (if supported)
 			deep    - Suspend-To-RAM or equivalent (if supported)
-			See Documentation/power/states.txt.
+			See Documentation/admin-guide/pm/sleep-states.rst.
 
 	meye.*=		[HW] Set MotionEye Camera parameters
-			See Documentation/video4linux/meye.txt.
+			See Documentation/media/v4l-drivers/meye.rst.
 
 	mfgpt_irq=	[IA-32] Specify the IRQ to use for the
 			Multi-Function General Purpose Timers on AMD Geode
@@ -3134,7 +3134,7 @@
 
 	plip=		[PPT,NET] Parallel port network link
 			Format: { parport<nr> | timid | 0 }
-			See also Documentation/parport.txt.
+			See also Documentation/admin-guide/parport.rst.
 
 	pmtmr=		[X86] Manual setup of pmtmr I/O Port.
 			Override pmtimer IOPort with a hex value.
@@ -3885,6 +3885,12 @@
 			[KNL] Should the soft-lockup detector generate panics.
 			Format: <integer>
 
+			A nonzero value instructs the soft-lockup detector
+			to panic the machine when a soft-lockup occurs. This
+			is also controlled by CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC
+			which is the respective build-time switch to that
+			functionality.
+
 	softlockup_all_cpu_backtrace=
 			[KNL] Should the soft-lockup detector generate
 			backtraces on all cpus.
@@ -4199,7 +4205,7 @@
 			TurboGraFX parallel port interface
 			Format:
 			<port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
-			See also Documentation/input/joystick-parport.txt
+			See also Documentation/input/devices/joystick-parport.rst
 
 	udbg-immortal	[PPC] When debugging early kernel crashes that
 			happen after console_init() and before a proper

Documentation/admin-guide/reporting-bugs.rst

@@ -94,7 +94,7 @@ step-by-step instructions for how a user can trigger the bug.
 
 If the failure includes an "OOPS:", take a picture of the screen, capture
 a netconsole trace, or type the message from your screen into the bug
-report.  Please read "Documentation/admin-guide/oops-tracing.rst" before posting your
+report.  Please read "Documentation/admin-guide/bug-hunting.rst" before posting your
 bug report. This explains what you should do with the "Oops" information
 to make it useful to the recipient.
 
@@ -120,7 +120,7 @@ summary from [1.]>" for easy identification by the developers::
   [4.2.] Kernel .config file:
   [5.] Most recent kernel version which did not have the bug:
   [6.] Output of Oops.. message (if applicable) with symbolic information
-       resolved (see Documentation/admin-guide/oops-tracing.rst)
+       resolved (see Documentation/admin-guide/bug-hunting.rst)
   [7.] A small shell script or example program which triggers the
        problem (if possible)
   [8.] Environment

Documentation/cdrom/ide-cd

@@ -55,13 +55,9 @@ This driver provides the following features:
    (to compile support as a module which can be loaded and unloaded)
    to the options: 
 
-      Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support
+      ATA/ATAPI/MFM/RLL support
       Include IDE/ATAPI CDROM support
 
-   and `no' to
-
-      Use old disk-only driver on primary interface
-
    Depending on what type of IDE interface you have, you may need to
    specify additional configuration options.  See
    Documentation/ide/ide.txt.

Documentation/core-api/kernel-api.rst

@@ -2,11 +2,9 @@
 The Linux Kernel API
 ====================
 
-Data Types
-==========
 
-Doubly Linked Lists
--------------------
+List Management Functions
+=========================
 
 .. kernel-doc:: include/linux/list.h
    :internal:
@@ -55,12 +53,27 @@ The Linux kernel provides more basic utility functions.
 Bitmap Operations
 -----------------
 
+.. kernel-doc:: lib/bitmap.c
+   :doc: bitmap introduction
+
+.. kernel-doc:: include/linux/bitmap.h
+   :doc: declare bitmap
+
+.. kernel-doc:: include/linux/bitmap.h
+   :doc: bitmap overview
+
+.. kernel-doc:: include/linux/bitmap.h
+   :doc: bitmap bitops
+
 .. kernel-doc:: lib/bitmap.c
    :export:
 
 .. kernel-doc:: lib/bitmap.c
    :internal:
 
+.. kernel-doc:: include/linux/bitmap.h
+   :internal:
+
 Command-line Parsing
 --------------------
 
@@ -70,13 +83,16 @@ Command-line Parsing
 CRC Functions
 -------------
 
+.. kernel-doc:: lib/crc4.c
+   :export:
+
 .. kernel-doc:: lib/crc7.c
    :export:
 
-.. kernel-doc:: lib/crc16.c
+.. kernel-doc:: lib/crc8.c
    :export:
 
-.. kernel-doc:: lib/crc-itu-t.c
+.. kernel-doc:: lib/crc16.c
    :export:
 
 .. kernel-doc:: lib/crc32.c
@@ -84,6 +100,9 @@ CRC Functions
 .. kernel-doc:: lib/crc-ccitt.c
    :export:
 
+.. kernel-doc:: lib/crc-itu-t.c
+   :export:
+
 idr/ida Functions
 -----------------
 
@@ -96,6 +115,30 @@ idr/ida Functions
 .. kernel-doc:: lib/idr.c
    :export:
 
+Math Functions in Linux
+=======================
+
+Base 2 log and power Functions
+------------------------------
+
+.. kernel-doc:: include/linux/log2.h
+   :internal:
+
+Division Functions
+------------------
+
+.. kernel-doc:: include/asm-generic/div64.h
+   :functions: do_div
+
+.. kernel-doc:: include/linux/math64.h
+   :internal:
+
+.. kernel-doc:: lib/div64.c
+   :functions: div_s64_rem div64_u64_rem div64_u64 div64_s64
+
+.. kernel-doc:: lib/gcd.c
+   :export:
+
 Memory Management in Linux
 ==========================
 

Documentation/dev-tools/coccinelle.rst

@@ -209,7 +209,7 @@ err.log will now have the profiling information, while stdout will
 provide some progress information as Coccinelle moves forward with
 work.
 
-DEBUG_FILE support is only supported when using coccinelle >= 1.2.
+DEBUG_FILE support is only supported when using coccinelle >= 1.0.2.
 
 .cocciconfig support
 --------------------

Documentation/dev-tools/kselftest.rst

@@ -31,6 +31,17 @@ To build and run the tests with a single command, use::
 
 Note that some tests will require root privileges.
 
+Build and run from user specific object directory (make O=dir)::
+
+  $ make O=/tmp/kselftest kselftest
+
+Build and run KBUILD_OUTPUT directory (make KBUILD_OUTPUT=)::
+
+  $ make KBUILD_OUTPUT=/tmp/kselftest kselftest
+
+The above commands run the tests and print pass/fail summary to make it
+easier to understand the test results. Please find the detailed individual
+test results for each test in /tmp/testname file(s).
 
 Running a subset of selftests
 =============================
@@ -46,10 +57,21 @@ You can specify multiple tests to build and run::
 
   $  make TARGETS="size timers" kselftest
 
+Build and run from user specific object directory (make O=dir)::
+
+  $ make O=/tmp/kselftest TARGETS="size timers" kselftest
+
+Build and run KBUILD_OUTPUT directory (make KBUILD_OUTPUT=)::
+
+  $ make KBUILD_OUTPUT=/tmp/kselftest TARGETS="size timers" kselftest
+
+The above commands run the tests and print pass/fail summary to make it
+easier to understand the test results. Please find the detailed individual
+test results for each test in /tmp/testname file(s).
+
 See the top-level tools/testing/selftests/Makefile for the list of all
 possible targets.
 
-
 Running the full range hotplug selftests
 ========================================
 
@@ -113,9 +135,17 @@ Contributing new tests (details)
  * Use TEST_GEN_XXX if such binaries or files are generated during
    compiling.
 
-   TEST_PROGS, TEST_GEN_PROGS mean it is the excutable tested by
+   TEST_PROGS, TEST_GEN_PROGS mean it is the executable tested by
    default.
 
+   TEST_CUSTOM_PROGS should be used by tests that require custom build
+   rule and prevent common build rule use.
+
+   TEST_PROGS are for test shell scripts. Please ensure shell script has
+   its exec bit set. Otherwise, lib.mk run_tests will generate a warning.
+
+   TEST_CUSTOM_PROGS and TEST_PROGS will be run by common run_tests.
+
    TEST_PROGS_EXTENDED, TEST_GEN_PROGS_EXTENDED mean it is the
    executable which is not tested by default.
    TEST_FILES, TEST_GEN_FILES mean it is the file which is used by

Documentation/dmaengine/00-INDEX

-00-INDEX
-	- this file.
-client.txt
-	-the DMA Engine API Guide.
-dmatest.txt
-	- how to compile, configure and use the dmatest system.
-provider.txt
-	- the DMA controller API.
\ No newline at end of file

Documentation/dmaengine/pxa_dma.txt

-PXA/MMP - DMA Slave controller
-==============================
-
-Constraints
------------
-  a) Transfers hot queuing
-     A driver submitting a transfer and issuing it should be granted the transfer
-     is queued even on a running DMA channel.
-     This implies that the queuing doesn't wait for the previous transfer end,
-     and that the descriptor chaining is not only done in the irq/tasklet code
-     triggered by the end of the transfer.
-     A transfer which is submitted and issued on a phy doesn't wait for a phy to
-     stop and restart, but is submitted on a "running channel". The other
-     drivers, especially mmp_pdma waited for the phy to stop before relaunching
-     a new transfer.
-
-  b) All transfers having asked for confirmation should be signaled
-     Any issued transfer with DMA_PREP_INTERRUPT should trigger a callback call.
-     This implies that even if an irq/tasklet is triggered by end of tx1, but
-     at the time of irq/dma tx2 is already finished, tx1->complete() and
-     tx2->complete() should be called.
-
-  c) Channel running state
-     A driver should be able to query if a channel is running or not. For the
-     multimedia case, such as video capture, if a transfer is submitted and then
-     a check of the DMA channel reports a "stopped channel", the transfer should
-     not be issued until the next "start of frame interrupt", hence the need to
-     know if a channel is in running or stopped state.
-
-  d) Bandwidth guarantee
-     The PXA architecture has 4 levels of DMAs priorities : high, normal, low.
-     The high priorities get twice as much bandwidth as the normal, which get twice
-     as much as the low priorities.
-     A driver should be able to request a priority, especially the real-time
-     ones such as pxa_camera with (big) throughputs.
-
-Design
-------
-  a) Virtual channels
-     Same concept as in sa11x0 driver, ie. a driver was assigned a "virtual
-     channel" linked to the requestor line, and the physical DMA channel is
-     assigned on the fly when the transfer is issued.
-
-  b) Transfer anatomy for a scatter-gather transfer
-     +------------+-----+---------------+----------------+-----------------+
-     | desc-sg[0] | ... | desc-sg[last] | status updater | finisher/linker |
-     +------------+-----+---------------+----------------+-----------------+
-
-     This structure is pointed by dma->sg_cpu.
-     The descriptors are used as follows :
-      - desc-sg[i]: i-th descriptor, transferring the i-th sg
-        element to the video buffer scatter gather
-      - status updater
-        Transfers a single u32 to a well known dma coherent memory to leave
-        a trace that this transfer is done. The "well known" is unique per
-        physical channel, meaning that a read of this value will tell which
-        is the last finished transfer at that point in time.
-      - finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN
-      - linker: has ddadr= desc-sg[0] of next transfer, dcmd=0
-
-  c) Transfers hot-chaining
-     Suppose the running chain is :
-         Buffer 1         Buffer 2
-     +---------+----+---+  +----+----+----+---+
-     | d0 | .. | dN | l |  | d0 | .. | dN | f |
-     +---------+----+-|-+  ^----+----+----+---+
-                      |    |
-                      +----+
-
-     After a call to dmaengine_submit(b3), the chain will look like :
-          Buffer 1              Buffer 2             Buffer 3
-     +---------+----+---+  +----+----+----+---+  +----+----+----+---+
-     | d0 | .. | dN | l |  | d0 | .. | dN | l |  | d0 | .. | dN | f |
-     +---------+----+-|-+  ^----+----+----+-|-+  ^----+----+----+---+
-                      |    |                |    |
-                      +----+                +----+
-                                           new_link
-
-     If while new_link was created the DMA channel stopped, it is _not_
-     restarted. Hot-chaining doesn't break the assumption that
-     dma_async_issue_pending() is to be used to ensure the transfer is actually started.
-
-     One exception to this rule :
-       - if Buffer1 and Buffer2 had all their addresses 8 bytes aligned
-       - and if Buffer3 has at least one address not 4 bytes aligned
-       - then hot-chaining cannot happen, as the channel must be stopped, the
-         "align bit" must be set, and the channel restarted As a consequence,
-         such a transfer tx_submit() will be queued on the submitted queue, and
-         this specific case if the DMA is already running in aligned mode.
-
-  d) Transfers completion updater
-     Each time a transfer is completed on a channel, an interrupt might be
-     generated or not, up to the client's request. But in each case, the last
-     descriptor of a transfer, the "status updater", will write the latest
-     transfer being completed into the physical channel's completion mark.
-
-     This will speed up residue calculation, for large transfers such as video
-     buffers which hold around 6k descriptors or more. This also allows without
-     any lock to find out what is the latest completed transfer in a running
-     DMA chain.
-
-  e) Transfers completion, irq and tasklet
-     When a transfer flagged as "DMA_PREP_INTERRUPT" is finished, the dma irq
-     is raised. Upon this interrupt, a tasklet is scheduled for the physical
-     channel.
-     The tasklet is responsible for :
-      - reading the physical channel last updater mark
-      - calling all the transfer callbacks of finished transfers, based on
-        that mark, and each transfer flags.
-     If a transfer is completed while this handling is done, a dma irq will
-     be raised, and the tasklet will be scheduled once again, having a new
-     updater mark.
-
-  f) Residue
-     Residue granularity will be descriptor based. The issued but not completed
-     transfers will be scanned for all of their descriptors against the
-     currently running descriptor.
-
-  g) Most complicated case of driver's tx queues
-     The most tricky situation is when :
-       - there are not "acked" transfers (tx0)
-       - a driver submitted an aligned tx1, not chained
-       - a driver submitted an aligned tx2 => tx2 is cold chained to tx1
-       - a driver issued tx1+tx2 => channel is running in aligned mode
-       - a driver submitted an aligned tx3 => tx3 is hot-chained
-       - a driver submitted an unaligned tx4 => tx4 is put in submitted queue,
-         not chained
-       - a driver issued tx4 => tx4 is put in issued queue, not chained
-       - a driver submitted an aligned tx5 => tx5 is put in submitted queue, not
-         chained
-       - a driver submitted an aligned tx6 => tx6 is put in submitted queue,
-         cold chained to tx5
-
-     This translates into (after tx4 is issued) :
-       - issued queue
-     +-----+ +-----+ +-----+ +-----+
-     | tx1 | | tx2 | | tx3 | | tx4 |
-     +---|-+ ^---|-+ ^-----+ +-----+
-         |   |   |   |
-         +---+   +---+
-       - submitted queue
-     +-----+ +-----+
-     | tx5 | | tx6 |
-     +---|-+ ^-----+
-         |   |
-         +---+
-       - completed queue : empty
-       - allocated queue : tx0
-
-     It should be noted that after tx3 is completed, the channel is stopped, and
-     restarted in "unaligned mode" to handle tx4.
-
-Author: Robert Jarzmik <robert.jarzmik@free.fr>

Documentation/doc-guide/kernel-doc.rst

@@ -65,7 +65,7 @@ Without options, the kernel-doc directive includes all documentation comments
 from the source file.
 
 The kernel-doc extension is included in the kernel source tree, at
-``Documentation/sphinx/kernel-doc.py``. Internally, it uses the
+``Documentation/sphinx/kerneldoc.py``. Internally, it uses the
 ``scripts/kernel-doc`` script to extract the documentation comments from the
 source.
 

Documentation/dmaengine/dmatest.txt → Documentation/driver-api/dmaengine/dmatest.rst

-				DMA Test Guide
-				==============
+==============
+DMA Test Guide
+==============
 
-		Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 
 This small document introduces how to test DMA drivers using dmatest module.
 
-	Part 1 - How to build the test module
+Part 1 - How to build the test module
+=====================================
 
 The menuconfig contains an option that could be found by following path:
 	Device Drivers -> DMA Engine support -> DMA Test client
@@ -13,25 +15,31 @@ The menuconfig contains an option that could be found by following path:
 In the configuration file the option called CONFIG_DMATEST. The dmatest could
 be built as module or inside kernel. Let's consider those cases.
 
-	Part 2 - When dmatest is built as a module...
+Part 2 - When dmatest is built as a module
+==========================================
 
-Example of usage:
-	% modprobe dmatest channel=dma0chan0 timeout=2000 iterations=1 run=1
+Example of usage: ::
 
-...or:
-	% modprobe dmatest
-	% echo dma0chan0 > /sys/module/dmatest/parameters/channel
-	% echo 2000 > /sys/module/dmatest/parameters/timeout
-	% echo 1 > /sys/module/dmatest/parameters/iterations
-	% echo 1 > /sys/module/dmatest/parameters/run
+    % modprobe dmatest channel=dma0chan0 timeout=2000 iterations=1 run=1
 
-...or on the kernel command line:
+...or: ::
 
-	dmatest.channel=dma0chan0 dmatest.timeout=2000 dmatest.iterations=1 dmatest.run=1
+    % modprobe dmatest
+    % echo dma0chan0 > /sys/module/dmatest/parameters/channel
+    % echo 2000 > /sys/module/dmatest/parameters/timeout
+    % echo 1 > /sys/module/dmatest/parameters/iterations
+    % echo 1 > /sys/module/dmatest/parameters/run
 
-Hint: available channel list could be extracted by running the following
-command:
-	% ls -1 /sys/class/dma/
+...or on the kernel command line: ::
+
+    dmatest.channel=dma0chan0 dmatest.timeout=2000 dmatest.iterations=1 dmatest.run=1
+
+..hint:: available channel list could be extracted by running the following
+         command:
+
+::
+
+    % ls -1 /sys/class/dma/
 
 Once started a message like "dmatest: Started 1 threads using dma0chan0" is
 emitted. After that only test failure messages are reported until the test
@@ -39,8 +47,9 @@ stops.
 
 Note that running a new test will not stop any in progress test.
 
-The following command returns the state of the test.
-	% cat /sys/module/dmatest/parameters/run
+The following command returns the state of the test. ::
+
+    % cat /sys/module/dmatest/parameters/run
 
 To wait for test completion userpace can poll 'run' until it is false, or use
 the wait parameter. Specifying 'wait=1' when loading the module causes module
@@ -50,15 +59,19 @@ before returning. For example, the following scripts wait for 42 tests
 to complete before exiting. Note that if 'iterations' is set to 'infinite' then
 waiting is disabled.
 
-Example:
-	% modprobe dmatest run=1 iterations=42 wait=1
-	% modprobe -r dmatest
-...or:
-	% modprobe dmatest run=1 iterations=42
-	% cat /sys/module/dmatest/parameters/wait
-	% modprobe -r dmatest
+Example: ::
+
+    % modprobe dmatest run=1 iterations=42 wait=1
+    % modprobe -r dmatest
 
-	Part 3 - When built-in in the kernel...
+...or: ::
+
+    % modprobe dmatest run=1 iterations=42
+    % cat /sys/module/dmatest/parameters/wait
+    % modprobe -r dmatest
+
+Part 3 - When built-in in the kernel
+====================================
 
 The module parameters that is supplied to the kernel command line will be used
 for the first performed test. After user gets a control, the test could be
@@ -66,27 +79,32 @@ re-run with the same or different parameters. For the details see the above
 section "Part 2 - When dmatest is built as a module..."
 
 In both cases the module parameters are used as the actual values for the test
-case. You always could check them at run-time by running
-	% grep -H . /sys/module/dmatest/parameters/*
+case. You always could check them at run-time by running ::
+
+    % grep -H . /sys/module/dmatest/parameters/*
 
-	Part 4 - Gathering the test results
+Part 4 - Gathering the test results
+===================================
 
-Test results are printed to the kernel log buffer with the format:
+Test results are printed to the kernel log buffer with the format: ::
 
-"dmatest: result <channel>: <test id>: '<error msg>' with src_off=<val> dst_off=<val> len=<val> (<err code>)"
+    "dmatest: result <channel>: <test id>: '<error msg>' with src_off=<val> dst_off=<val> len=<val> (<err code>)"
 
-Example of output:
-	% dmesg | tail -n 1
-	dmatest: result dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0)
+Example of output: ::
+
+
+    % dmesg | tail -n 1
+    dmatest: result dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0)
 
 The message format is unified across the different types of errors. A number in
 the parens represents additional information, e.g. error code, error counter,
 or status. A test thread also emits a summary line at completion listing the
 number of tests executed, number that failed, and a result code.
 
-Example:
-	% dmesg | tail -n 1
-	dmatest: dma0chan0-copy0: summary 1 test, 0 failures 1000 iops 100000 KB/s (0)
+Example: ::
+
+    % dmesg | tail -n 1
+    dmatest: dma0chan0-copy0: summary 1 test, 0 failures 1000 iops 100000 KB/s (0)
 
 The details of a data miscompare error are also emitted, but do not follow the
 above format.

Documentation/driver-api/dmaengine/index.rst

+=======================
+DMAEngine documentation
+=======================
+
+DMAEngine documentation provides documents for various aspects of DMAEngine
+framework.
+
+DMAEngine documentation
+-----------------------
+
+This book helps with DMAengine internal APIs and guide for DMAEngine device
+driver writers.
+
+.. toctree::
+   :maxdepth: 1
+
+   provider
+
+DMAEngine client documentation
+------------------------------
+
+This book is a guide to device driver writers on how to use the Slave-DMA
+API of the DMAEngine. This is applicable only for slave DMA usage only.
+
+.. toctree::
+   :maxdepth: 1
+
+   client
+
+DMA Test documentation
+----------------------
+
+This book introduces how to test DMA drivers using dmatest module.
+
+.. toctree::
+   :maxdepth: 1
+
+   dmatest
+
+PXA DMA documentation
+----------------------
+
+This book adds some notes about PXA DMA
+
+.. toctree::
+   :maxdepth: 1
+
+   pxa_dma
+
+.. only::  subproject
+
+   Indices
+   =======
+
+   * :ref:`genindex`

Documentation/driver-api/dmaengine/pxa_dma.rst

+==============================
+PXA/MMP - DMA Slave controller
+==============================
+
+Constraints
+===========
+
+a) Transfers hot queuing
+A driver submitting a transfer and issuing it should be granted the transfer
+is queued even on a running DMA channel.
+This implies that the queuing doesn't wait for the previous transfer end,
+and that the descriptor chaining is not only done in the irq/tasklet code
+triggered by the end of the transfer.
+A transfer which is submitted and issued on a phy doesn't wait for a phy to
+stop and restart, but is submitted on a "running channel". The other
+drivers, especially mmp_pdma waited for the phy to stop before relaunching
+a new transfer.
+
+b) All transfers having asked for confirmation should be signaled
+Any issued transfer with DMA_PREP_INTERRUPT should trigger a callback call.
+This implies that even if an irq/tasklet is triggered by end of tx1, but
+at the time of irq/dma tx2 is already finished, tx1->complete() and
+tx2->complete() should be called.
+
+c) Channel running state
+A driver should be able to query if a channel is running or not. For the
+multimedia case, such as video capture, if a transfer is submitted and then
+a check of the DMA channel reports a "stopped channel", the transfer should
+not be issued until the next "start of frame interrupt", hence the need to
+know if a channel is in running or stopped state.
+
+d) Bandwidth guarantee
+The PXA architecture has 4 levels of DMAs priorities : high, normal, low.
+The high priorities get twice as much bandwidth as the normal, which get twice
+as much as the low priorities.
+A driver should be able to request a priority, especially the real-time
+ones such as pxa_camera with (big) throughputs.
+
+Design
+======
+a) Virtual channels
+Same concept as in sa11x0 driver, ie. a driver was assigned a "virtual
+channel" linked to the requestor line, and the physical DMA channel is
+assigned on the fly when the transfer is issued.
+
+b) Transfer anatomy for a scatter-gather transfer
+
+::
+
+   +------------+-----+---------------+----------------+-----------------+
+   | desc-sg[0] | ... | desc-sg[last] | status updater | finisher/linker |
+   +------------+-----+---------------+----------------+-----------------+
+
+This structure is pointed by dma->sg_cpu.
+The descriptors are used as follows :
+
+    - desc-sg[i]: i-th descriptor, transferring the i-th sg
+      element to the video buffer scatter gather
+
+    - status updater
+      Transfers a single u32 to a well known dma coherent memory to leave
+      a trace that this transfer is done. The "well known" is unique per
+      physical channel, meaning that a read of this value will tell which
+      is the last finished transfer at that point in time.
+
+    - finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN
+
+    - linker: has ddadr= desc-sg[0] of next transfer, dcmd=0
+
+c) Transfers hot-chaining
+Suppose the running chain is:
+
+::
+
+   Buffer 1              Buffer 2
+   +---------+----+---+  +----+----+----+---+
+   | d0 | .. | dN | l |  | d0 | .. | dN | f |
+   +---------+----+-|-+  ^----+----+----+---+
+                    |    |
+                    +----+
+
+After a call to dmaengine_submit(b3), the chain will look like:
+
+::
+
+   Buffer 1              Buffer 2              Buffer 3
+   +---------+----+---+  +----+----+----+---+  +----+----+----+---+
+   | d0 | .. | dN | l |  | d0 | .. | dN | l |  | d0 | .. | dN | f |
+   +---------+----+-|-+  ^----+----+----+-|-+  ^----+----+----+---+
+                    |    |                |    |
+                    +----+                +----+
+                                         new_link
+
+If while new_link was created the DMA channel stopped, it is _not_
+restarted. Hot-chaining doesn't break the assumption that
+dma_async_issue_pending() is to be used to ensure the transfer is actually started.
+
+One exception to this rule :
+
+- if Buffer1 and Buffer2 had all their addresses 8 bytes aligned
+
+- and if Buffer3 has at least one address not 4 bytes aligned
+
+- then hot-chaining cannot happen, as the channel must be stopped, the
+  "align bit" must be set, and the channel restarted As a consequence,
+  such a transfer tx_submit() will be queued on the submitted queue, and
+  this specific case if the DMA is already running in aligned mode.
+
+d) Transfers completion updater
+Each time a transfer is completed on a channel, an interrupt might be
+generated or not, up to the client's request. But in each case, the last
+descriptor of a transfer, the "status updater", will write the latest
+transfer being completed into the physical channel's completion mark.
+
+This will speed up residue calculation, for large transfers such as video
+buffers which hold around 6k descriptors or more. This also allows without
+any lock to find out what is the latest completed transfer in a running
+DMA chain.
+
+e) Transfers completion, irq and tasklet
+When a transfer flagged as "DMA_PREP_INTERRUPT" is finished, the dma irq
+is raised. Upon this interrupt, a tasklet is scheduled for the physical
+channel.
+
+The tasklet is responsible for :
+
+- reading the physical channel last updater mark
+
+- calling all the transfer callbacks of finished transfers, based on
+  that mark, and each transfer flags.
+
+If a transfer is completed while this handling is done, a dma irq will
+be raised, and the tasklet will be scheduled once again, having a new
+updater mark.
+
+f) Residue
+Residue granularity will be descriptor based. The issued but not completed
+transfers will be scanned for all of their descriptors against the
+currently running descriptor.
+
+g) Most complicated case of driver's tx queues
+The most tricky situation is when :
+
+ - there are not "acked" transfers (tx0)
+
+ - a driver submitted an aligned tx1, not chained
+
+ - a driver submitted an aligned tx2 => tx2 is cold chained to tx1
+
+ - a driver issued tx1+tx2 => channel is running in aligned mode
+
+ - a driver submitted an aligned tx3 => tx3 is hot-chained
+
+ - a driver submitted an unaligned tx4 => tx4 is put in submitted queue,
+   not chained
+
+ - a driver issued tx4 => tx4 is put in issued queue, not chained
+
+ - a driver submitted an aligned tx5 => tx5 is put in submitted queue, not
+   chained
+
+ - a driver submitted an aligned tx6 => tx6 is put in submitted queue,
+   cold chained to tx5
+
+ This translates into (after tx4 is issued) :
+
+ - issued queue
+
+ ::
+
+      +-----+ +-----+ +-----+ +-----+
+      | tx1 | | tx2 | | tx3 | | tx4 |
+      +---|-+ ^---|-+ ^-----+ +-----+
+          |   |   |   |
+          +---+   +---+
+        - submitted queue
+      +-----+ +-----+
+      | tx5 | | tx6 |
+      +---|-+ ^-----+
+          |   |
+          +---+
+
+- completed queue : empty
+
+- allocated queue : tx0
+
+It should be noted that after tx3 is completed, the channel is stopped, and
+restarted in "unaligned mode" to handle tx4.
+
+Author: Robert Jarzmik <robert.jarzmik@free.fr>

Documentation/driver-api/index.rst

@@ -46,6 +46,7 @@ available subsections can be seen below.
    pinctl
    gpio
    misc_devices
+   dmaengine/index
 
 .. only::  subproject and html
 

Documentation/driver-api/usb/usb.rst

@@ -690,9 +690,7 @@ The USB devices are now exported via debugfs:
 This file is handy for status viewing tools in user mode, which can scan
 the text format and ignore most of it. More detailed device status
 (including class and vendor status) is available from device-specific
-files. For information about the current format of this file, see the
-``Documentation/usb/proc_usb_info.txt`` file in your Linux kernel
-sources.
+files. For information about the current format of this file, see below.
 
 This file, in combination with the poll() system call, can also be used
 to detect when devices are added or removed::

Documentation/fb/fbcon.txt

@@ -77,8 +77,8 @@ C. Boot options
 1. fbcon=font:<name>
 
         Select the initial font to use. The value 'name' can be any of the
-        compiled-in fonts: VGA8x16, 7x14, 10x18, VGA8x8, MINI4x6, RomanLarge,
-        SUN8x16, SUN12x22, ProFont6x11, Acorn8x8, PEARL8x8.
+        compiled-in fonts: 10x18, 6x10, 7x14, Acorn8x8, MINI4x6,
+        PEARL8x8, ProFont6x11, SUN12x22, SUN8x16, VGA8x16, VGA8x8.
 
 	Note, not all drivers can handle font with widths not divisible by 8,
         such as vga16fb.

Documentation/features/debug/KASAN/arch-support.txt

@@ -34,6 +34,6 @@
     |        tile: | TODO |
     |          um: | TODO |
     |   unicore32: | TODO |
-    |         x86: |  ok  |
+    |         x86: |  ok  | 64-bit only
     |      xtensa: | TODO |
     -----------------------

Documentation/filesystems/dnotify.txt

@@ -62,7 +62,7 @@ disabled, fcntl(fd, F_NOTIFY, ...) will return -EINVAL.
 
 Example
 -------
-See Documentation/filesystems/dnotify_test.c for an example.
+See tools/testing/selftests/filesystems/dnotify_test.c for an example.
 
 NOTE
 ----

Documentation/filesystems/ext4.txt

@@ -94,10 +94,10 @@ Note: More extensive information for getting started with ext4 can be
 * ability to pack bitmaps and inode tables into larger virtual groups via the
   flex_bg feature
 * large file support
-* Inode allocation using large virtual block groups via flex_bg
+* inode allocation using large virtual block groups via flex_bg
 * delayed allocation
 * large block (up to pagesize) support
-* efficient new ordered mode in JBD2 and ext4(avoid using buffer head to force
+* efficient new ordered mode in JBD2 and ext4 (avoid using buffer head to force
   the ordering)
 
 [1] Filesystems with a block size of 1k may see a limit imposed by the
@@ -105,7 +105,7 @@ directory hash tree having a maximum depth of two.
 
 2.2 Candidate features for future inclusion
 
-* Online defrag (patches available but not well tested)
+* online defrag (patches available but not well tested)
 * reduced mke2fs time via lazy itable initialization in conjunction with
   the uninit_bg feature (capability to do this is available in e2fsprogs
   but a kernel thread to do lazy zeroing of unused inode table blocks
@@ -602,7 +602,7 @@ Table of Ext4 specific ioctls
 			      bitmaps and inode table, the userspace tool thus
 			      just passes the new number of blocks.
 
-EXT4_IOC_SWAP_BOOT	      Swap i_blocks and associated attributes
+ EXT4_IOC_SWAP_BOOT	      Swap i_blocks and associated attributes
 			      (like i_blocks, i_size, i_flags, ...) from
 			      the specified inode with inode
 			      EXT4_BOOT_LOADER_INO (#5). This is typically

Documentation/hid/hiddev.txt

@@ -12,7 +12,7 @@ To support these disparate requirements, the Linux USB system provides
 HID events to two separate interfaces:
 * the input subsystem, which converts HID events into normal input
 device interfaces (such as keyboard, mouse and joystick) and a
-normalised event interface - see Documentation/input/input.txt
+normalised event interface - see Documentation/input/input.rst
 * the hiddev interface, which provides fairly raw HID events
 
 The data flow for a HID event produced by a device is something like

Documentation/input/devices/xpad.rst

@@ -230,4 +230,5 @@ Historic Edits
 2005-03-19 - Dominic Cerquetti <binary1230@yahoo.com>
  - added stuff for dance pads, new d-pad->axes mappings
 
-Later changes may be viewed with 'git log Documentation/input/xpad.txt'
+Later changes may be viewed with
+'git log --follow Documentation/input/devices/xpad.rst'

Documentation/laptops/laptop-mode.txt

@@ -184,7 +184,7 @@ is done when dirty_ratio is reached.
 DO_CPU:
 
 Enable CPU frequency scaling when in laptop mode. (Requires CPUFreq to be setup.
-See Documentation/cpu-freq/user-guide.txt for more info. Disabled by default.)
+See Documentation/admin-guide/pm/cpufreq.rst for more info. Disabled by default.)
 
 CPU_MAXFREQ:
 
@@ -287,7 +287,7 @@ MINIMUM_BATTERY_MINUTES=10
 
 # Should the maximum CPU frequency be adjusted down while on battery?
 # Requires CPUFreq to be setup.
-# See Documentation/cpu-freq/user-guide.txt for more info
+# See Documentation/admin-guide/pm/cpufreq.rst for more info
 #DO_CPU=0
 
 # When on battery what is the maximum CPU speed that the system should
@@ -378,7 +378,7 @@ BATT_HD=${BATT_HD:-'4'}
 DIRTY_RATIO=${DIRTY_RATIO:-'40'}
 
 # cpu frequency scaling
-# See Documentation/cpu-freq/user-guide.txt for more info
+# See Documentation/admin-guide/pm/cpufreq.rst for more info
 DO_CPU=${CPU_MANAGE:-'0'}
 CPU_MAXFREQ=${CPU_MAXFREQ:-'slowest'}
 

Documentation/locking/rt-mutex-design.txt

@@ -8,7 +8,7 @@ RT-mutex implementation design
 
 This document tries to describe the design of the rtmutex.c implementation.
 It doesn't describe the reasons why rtmutex.c exists. For that please see
-Documentation/rt-mutex.txt.  Although this document does explain problems
+Documentation/locking/rt-mutex.txt.  Although this document does explain problems
 that happen without this code, but that is in the concept to understand
 what the code actually is doing.
 

Documentation/media/dvb-drivers/bt8xx.rst

@@ -18,7 +18,7 @@ General information
 
 This class of cards has a bt878a as the PCI interface, and require the bttv driver
 for accessing the i2c bus and the gpio pins of the bt8xx chipset.
-Please see Documentation/dvb/cards.txt => o Cards based on the Conexant Bt8xx PCI bridge:
+Please see Documentation/media/dvb-drivers/cards.rst => o Cards based on the Conexant Bt8xx PCI bridge:
 
 Compiling kernel please enable:
 
@@ -45,7 +45,7 @@ Loading Modules
 Regular case: If the bttv driver detects a bt8xx-based DVB card, all frontend and backend modules will be loaded automatically.
 Exceptions are:
 - Old TwinHan DST cards or clones with or without CA slot and not containing an Eeprom.
-People running udev please see Documentation/dvb/udev.txt.
+People running udev please see Documentation/media/dvb-drivers/udev.rst.
 
 In the following cases overriding the PCI type detection for dvb-bt8xx might be necessary:
 
@@ -72,7 +72,7 @@ Useful parameters for verbosity level and debugging the dst module:
 The autodetected values are determined by the cards' "response string".
 In your logs see f. ex.: dst_get_device_id: Recognize [DSTMCI].
 For bug reports please send in a complete log with verbose=4 activated.
-Please also see Documentation/dvb/ci.txt.
+Please also see Documentation/media/dvb-drivers/ci.rst.
 
 Running multiple cards
 ~~~~~~~~~~~~~~~~~~~~~~
@@ -100,7 +100,7 @@ Examples of card ID's:
 
 	$ modprobe bttv card=113 card=135
 
-For a full list of card ID's please see Documentation/video4linux/CARDLIST.bttv.
+For a full list of card ID's please see Documentation/media/v4l-drivers/bttv-cardlist.rst.
 In case of further problems please subscribe and send questions to the mailing list: linux-dvb@linuxtv.org.
 
 Probing the cards with broken PCI subsystem ID

Documentation/media/uapi/v4l/dev-sliced-vbi.rst

@@ -431,7 +431,7 @@ MPEG stream.
 *Historical context*: This format specification originates from a
 custom, embedded, sliced VBI data format used by the ``ivtv`` driver.
 This format has already been informally specified in the kernel sources
-in the file ``Documentation/video4linux/cx2341x/README.vbi`` . The
+in the file ``Documentation/media/v4l-drivers/cx2341x.rst`` . The
 maximum size of the payload and other aspects of this format are driven
 by the CX23415 MPEG decoder's capabilities and limitations with respect
 to extracting, decoding, and displaying sliced VBI data embedded within

Documentation/media/uapi/v4l/extended-controls.rst

@@ -284,7 +284,7 @@ enum v4l2_mpeg_stream_vbi_fmt -
     * - ``V4L2_MPEG_STREAM_VBI_FMT_IVTV``
       - VBI in private packets, IVTV format (documented in the kernel
 	sources in the file
-	``Documentation/video4linux/cx2341x/README.vbi``)
+	``Documentation/media/v4l-drivers/cx2341x.rst``)
 
 
 

Documentation/media/uapi/v4l/pixfmt-reserved.rst

@@ -52,7 +52,7 @@ please make a proposal on the linux-media mailing list.
 	`http://www.ivtvdriver.org/ <http://www.ivtvdriver.org/>`__
 
 	The format is documented in the kernel sources in the file
-	``Documentation/video4linux/cx2341x/README.hm12``
+	``Documentation/media/v4l-drivers/cx2341x.rst``
     * .. _V4L2-PIX-FMT-CPIA1:
 
       - ``V4L2_PIX_FMT_CPIA1``

Documentation/media/v4l-drivers/bttv.rst

@@ -307,7 +307,7 @@ console and let some terminal application log the messages.  /me uses
 screen.  See Documentation/admin-guide/serial-console.rst for details on setting
 up a serial console.
 
-Read Documentation/admin-guide/oops-tracing.rst to learn how to get any useful
+Read Documentation/admin-guide/bug-hunting.rst to learn how to get any useful
 information out of a register+stack dump printed by the kernel on
 protection faults (so-called "kernel oops").
 

Documentation/media/v4l-drivers/max2175.rst

@@ -7,7 +7,7 @@ The MAX2175 driver implements the following driver-specific controls:
 -------------------------------
     Enable/Disable I2S output of the tuner. This is a private control
     that can be accessed only using the subdev interface.
-    Refer to Documentation/media/kapi/v4l2-controls for more details.
+    Refer to Documentation/media/kapi/v4l2-controls.rst for more details.
 
 .. flat-table::
     :header-rows:  0

Documentation/networking/cdc_mbim.txt

@@ -332,8 +332,8 @@ References
 [5] "MBIM (Mobile Broadband Interface Model) Registry"
        - http://compliance.usb.org/mbim/
 
-[6] "/dev/bus/usb filesystem output"
-       - Documentation/usb/proc_usb_info.txt
+[6] "/sys/kernel/debug/usb/devices output format"
+       - Documentation/driver-api/usb/usb.rst
 
 [7] "/sys/bus/usb/devices/.../descriptors"
        - Documentation/ABI/stable/sysfs-bus-usb

Documentation/networking/checksum-offloads.txt

@@ -47,7 +47,7 @@ The requirements for GSO are more complicated, because when segmenting an
  (section 'E') for more details.
 
 A driver declares its offload capabilities in netdev->hw_features; see
- Documentation/networking/netdev-features for more.  Note that a device
+ Documentation/networking/netdev-features.txt for more.  Note that a device
  which only advertises NETIF_F_IP[V6]_CSUM must still obey the csum_start
  and csum_offset given in the SKB; if it tries to deduce these itself in
  hardware (as some NICs do) the driver should check that the values in the

Documentation/networking/packet_mmap.txt

@@ -1055,7 +1055,7 @@ TX_RING part only TP_STATUS_AVAILABLE is set, then the tp_sec and tp_{n,u}sec
 members do not contain a valid value. For TX_RINGs, by default no timestamp
 is generated!
 
-See include/linux/net_tstamp.h and Documentation/networking/timestamping
+See include/linux/net_tstamp.h and Documentation/networking/timestamping.txt
 for more information on hardware timestamps.
 
 -------------------------------------------------------------------------------

Documentation/pi-futex.txt

@@ -119,4 +119,4 @@ properties of futexes, and all four combinations are possible: futex,
 robust-futex, PI-futex, robust+PI-futex.
 
 More details about priority inheritance can be found in
-Documentation/rt-mutex.txt.
+Documentation/locking/rt-mutex.txt.

Documentation/power/interface.txt

@@ -24,7 +24,8 @@ platform.
 
 If one of the strings listed in /sys/power/state is written to it, the system
 will attempt to transition into the corresponding sleep state.  Refer to
-Documentation/power/states.txt for a description of each of those states.
+Documentation/admin-guide/pm/sleep-states.rst for a description of each of
+those states.
 
 /sys/power/disk controls the operating mode of hibernation (Suspend-to-Disk).
 Specifically, it tells the kernel what to do after creating a hibernation image.
@@ -42,7 +43,7 @@ The currently selected option is printed in square brackets.
 The 'platform' option is only available if the platform provides a special
 mechanism to put the system to sleep after creating a hibernation image (ACPI
 does that, for example).  The 'suspend' option is available if Suspend-to-RAM
-is supported.  Refer to Documentation/power/basic_pm_debugging.txt for the
+is supported.  Refer to Documentation/power/basic-pm-debugging.txt for the
 description of the 'test_resume' option.
 
 To select an option, write the string representing it to /sys/power/disk.

Documentation/power/pci.txt

@@ -8,7 +8,7 @@ management.  Based on previous work by Patrick Mochel <mochel@transmeta.com>
 
 This document only covers the aspects of power management specific to PCI
 devices.  For general description of the kernel's interfaces related to device
-power management refer to Documentation/power/admin-guide/devices.rst and
+power management refer to Documentation/driver-api/pm/devices.rst and
 Documentation/power/runtime_pm.txt.
 
 ---------------------------------------------------------------------------
@@ -417,7 +417,7 @@ pm->runtime_idle() callback.
 2.4. System-Wide Power Transitions
 ----------------------------------
 There are a few different types of system-wide power transitions, described in
-Documentation/power/admin-guide/devices.rst.  Each of them requires devices to be handled
+Documentation/driver-api/pm/devices.rst.  Each of them requires devices to be handled
 in a specific way and the PM core executes subsystem-level power management
 callbacks for this purpose.  They are executed in phases such that each phase
 involves executing the same subsystem-level callback for every device belonging
@@ -623,7 +623,7 @@ System restore requires a hibernation image to be loaded into memory and the
 pre-hibernation memory contents to be restored before the pre-hibernation system
 activity can be resumed.
 
-As described in Documentation/power/admin-guide/devices.rst, the hibernation image is loaded
+As described in Documentation/driver-api/pm/devices.rst, the hibernation image is loaded
 into memory by a fresh instance of the kernel, called the boot kernel, which in
 turn is loaded and run by a boot loader in the usual way.  After the boot kernel
 has loaded the image, it needs to replace its own code and data with the code
@@ -677,7 +677,7 @@ controlling the runtime power management of their devices.
 
 At the time of this writing there are two ways to define power management
 callbacks for a PCI device driver, the recommended one, based on using a
-dev_pm_ops structure described in Documentation/power/admin-guide/devices.rst, and the
+dev_pm_ops structure described in Documentation/driver-api/pm/devices.rst, and the
 "legacy" one, in which the .suspend(), .suspend_late(), .resume_early(), and
 .resume() callbacks from struct pci_driver are used.  The legacy approach,
 however, doesn't allow one to define runtime power management callbacks and is
@@ -1046,5 +1046,5 @@ PCI Local Bus Specification, Rev. 3.0
 PCI Bus Power Management Interface Specification, Rev. 1.2
 Advanced Configuration and Power Interface (ACPI) Specification, Rev. 3.0b
 PCI Express Base Specification, Rev. 2.0
-Documentation/power/admin-guide/devices.rst
+Documentation/driver-api/pm/devices.rst
 Documentation/power/runtime_pm.txt

Documentation/power/runtime_pm.txt

@@ -680,7 +680,7 @@ left in runtime suspend.  If that happens, the PM core will not execute any
 system suspend and resume callbacks for all of those devices, except for the
 complete callback, which is then entirely responsible for handling the device
 as appropriate.  This only applies to system suspend transitions that are not
-related to hibernation (see Documentation/power/admin-guide/devices.rst for more
+related to hibernation (see Documentation/driver-api/pm/devices.rst for more
 information).
 
 The PM core does its best to reduce the probability of race conditions between

Documentation/process/3.Early-stage.rst

@@ -178,7 +178,7 @@ matter is (1) kernel developers tend to be busy, (2) there is no shortage
 of people with grand plans and little code (or even prospect of code) to
 back them up, and (3) nobody is obligated to review or comment on ideas
 posted by others.  Beyond that, high-level designs often hide problems
-which are only reviewed when somebody actually tries to implement those
+which are only revealed when somebody actually tries to implement those
 designs; for that reason, kernel developers would rather see the code.
 
 If a request-for-comments posting yields little in the way of comments, do

Documentation/process/4.Coding.rst

@@ -307,7 +307,7 @@ variety of potential coding problems; it can also propose fixes for those
 problems.  Quite a few "semantic patches" for the kernel have been packaged
 under the scripts/coccinelle directory; running "make coccicheck" will run
 through those semantic patches and report on any problems found.  See
-Documentation/coccinelle.txt for more information.
+Documentation/dev-tools/coccinelle.rst for more information.
 
 Other kinds of portability errors are best found by compiling your code for
 other architectures.  If you do not happen to have an S/390 system or a

Documentation/process/index.rst

@@ -26,6 +26,7 @@ Below are the essential guides that every developer should read.
    coding-style
    email-clients
    kernel-enforcement-statement
+   kernel-driver-statement
 
 Other guides to the community that are of interest to most developers are: 
 

Documentation/process/kernel-driver-statement.rst

+Kernel Driver Statement
+-----------------------
+
+Position Statement on Linux Kernel Modules
+==========================================
+
+
+We, the undersigned Linux kernel developers, consider any closed-source
+Linux kernel module or driver to be harmful and undesirable. We have
+repeatedly found them to be detrimental to Linux users, businesses, and
+the greater Linux ecosystem. Such modules negate the openness,
+stability, flexibility, and maintainability of the Linux development
+model and shut their users off from the expertise of the Linux
+community. Vendors that provide closed-source kernel modules force their
+customers to give up key Linux advantages or choose new vendors.
+Therefore, in order to take full advantage of the cost savings and
+shared support benefits open source has to offer, we urge vendors to
+adopt a policy of supporting their customers on Linux with open-source
+kernel code.
+
+We speak only for ourselves, and not for any company we might work for
+today, have in the past, or will in the future.
+
+ - Dave Airlie
+ - Nick Andrew
+ - Jens Axboe
+ - Ralf Baechle
+ - Felipe Balbi
+ - Ohad Ben-Cohen
+ - Muli Ben-Yehuda
+ - Jiri Benc
+ - Arnd Bergmann
+ - Thomas Bogendoerfer
+ - Vitaly Bordug
+ - James Bottomley
+ - Josh Boyer
+ - Neil Brown
+ - Mark Brown
+ - David Brownell
+ - Michael Buesch
+ - Franck Bui-Huu
+ - Adrian Bunk
+ - François Cami
+ - Ralph Campbell
+ - Luiz Fernando N. Capitulino
+ - Mauro Carvalho Chehab
+ - Denis Cheng
+ - Jonathan Corbet
+ - Glauber Costa
+ - Alan Cox
+ - Magnus Damm
+ - Ahmed S. Darwish
+ - Robert P. J. Day
+ - Hans de Goede
+ - Arnaldo Carvalho de Melo
+ - Helge Deller
+ - Jean Delvare
+ - Mathieu Desnoyers
+ - Sven-Thorsten Dietrich
+ - Alexey Dobriyan
+ - Daniel Drake
+ - Alex Dubov
+ - Randy Dunlap
+ - Michael Ellerman
+ - Pekka Enberg
+ - Jan Engelhardt
+ - Mark Fasheh
+ - J. Bruce Fields
+ - Larry Finger
+ - Jeremy Fitzhardinge
+ - Mike Frysinger
+ - Kumar Gala
+ - Robin Getz
+ - Liam Girdwood
+ - Jan-Benedict Glaw
+ - Thomas Gleixner
+ - Brice Goglin
+ - Cyrill Gorcunov
+ - Andy Gospodarek
+ - Thomas Graf
+ - Krzysztof Halasa
+ - Harvey Harrison
+ - Stephen Hemminger
+ - Michael Hennerich
+ - Tejun Heo
+ - Benjamin Herrenschmidt
+ - Kristian Høgsberg
+ - Henrique de Moraes Holschuh
+ - Marcel Holtmann
+ - Mike Isely
+ - Takashi Iwai
+ - Olof Johansson
+ - Dave Jones
+ - Jesper Juhl
+ - Matthias Kaehlcke
+ - Kenji Kaneshige
+ - Jan Kara
+ - Jeremy Kerr
+ - Russell King
+ - Olaf Kirch
+ - Roel Kluin
+ - Hans-Jürgen Koch
+ - Auke Kok
+ - Peter Korsgaard
+ - Jiri Kosina
+ - Mariusz Kozlowski
+ - Greg Kroah-Hartman
+ - Michael Krufky
+ - Aneesh Kumar
+ - Clemens Ladisch
+ - Christoph Lameter
+ - Gunnar Larisch
+ - Anders Larsen
+ - Grant Likely
+ - John W. Linville
+ - Yinghai Lu
+ - Tony Luck
+ - Pavel Machek
+ - Matt Mackall
+ - Paul Mackerras
+ - Roland McGrath
+ - Patrick McHardy
+ - Kyle McMartin
+ - Paul Menage
+ - Thierry Merle
+ - Eric Miao
+ - Akinobu Mita
+ - Ingo Molnar
+ - James Morris
+ - Andrew Morton
+ - Paul Mundt
+ - Oleg Nesterov
+ - Luca Olivetti
+ - S.Çağlar Onur
+ - Pierre Ossman
+ - Keith Owens
+ - Venkatesh Pallipadi
+ - Nick Piggin
+ - Nicolas Pitre
+ - Evgeniy Polyakov
+ - Richard Purdie
+ - Mike Rapoport
+ - Sam Ravnborg
+ - Gerrit Renker
+ - Stefan Richter
+ - David Rientjes
+ - Luis R. Rodriguez
+ - Stefan Roese
+ - Francois Romieu
+ - Rami Rosen
+ - Stephen Rothwell
+ - Maciej W. Rozycki
+ - Mark Salyzyn
+ - Yoshinori Sato
+ - Deepak Saxena
+ - Holger Schurig
+ - Amit Shah
+ - Yoshihiro Shimoda
+ - Sergei Shtylyov
+ - Kay Sievers
+ - Sebastian Siewior
+ - Rik Snel
+ - Jes Sorensen
+ - Alexey Starikovskiy
+ - Alan Stern
+ - Timur Tabi
+ - Hirokazu Takata
+ - Eliezer Tamir
+ - Eugene Teo
+ - Doug Thompson
+ - FUJITA Tomonori
+ - Dmitry Torokhov
+ - Marcelo Tosatti
+ - Steven Toth
+ - Theodore Tso
+ - Matthias Urlichs
+ - Geert Uytterhoeven
+ - Arjan van de Ven
+ - Ivo van Doorn
+ - Rik van Riel
+ - Wim Van Sebroeck
+ - Hans Verkuil
+ - Horst H. von Brand
+ - Dmitri Vorobiev
+ - Anton Vorontsov
+ - Daniel Walker
+ - Johannes Weiner
+ - Harald Welte
+ - Matthew Wilcox
+ - Dan J. Williams
+ - Darrick J. Wong
+ - David Woodhouse
+ - Chris Wright
+ - Bryan Wu
+ - Rafael J. Wysocki
+ - Herbert Xu
+ - Vlad Yasevich
+ - Peter Zijlstra
+ - Bartlomiej Zolnierkiewicz

Documentation/process/submitting-drivers.rst

@@ -117,7 +117,7 @@ PM support:
 		anything.  For the driver testing instructions see
 		Documentation/power/drivers-testing.txt and for a relatively
 		complete overview of the power management issues related to
-		drivers see Documentation/power/admin-guide/devices.rst .
+		drivers see Documentation/driver-api/pm/devices.rst.
 
 Control:
 		In general if there is active maintenance of a driver by

Documentation/process/submitting-patches.rst

@@ -621,14 +621,14 @@ The canonical patch subject line is::
 
 The canonical patch message body contains the following:
 
-  - A ``from`` line specifying the patch author (only needed if the person
-    sending the patch is not the author).
-
-  - An empty line.
+  - A ``from`` line specifying the patch author, followed by an empty
+    line (only needed if the person sending the patch is not the author).
 
   - The body of the explanation, line wrapped at 75 columns, which will
     be copied to the permanent changelog to describe this patch.
 
+  - An empty line.
+
   - The ``Signed-off-by:`` lines, described above, which will
     also go in the changelog.
 

Documentation/security/LSM.rst

@@ -5,7 +5,7 @@ Linux Security Module Development
 Based on https://lkml.org/lkml/2007/10/26/215,
 a new LSM is accepted into the kernel when its intent (a description of
 what it tries to protect against and in what cases one would expect to
-use it) has been appropriately documented in ``Documentation/security/LSM``.
+use it) has been appropriately documented in ``Documentation/security/LSM.rst``.
 This allows an LSM's code to be easily compared to its goals, and so
 that end users and distros can make a more informed decision about which
 LSMs suit their requirements.

Documentation/security/credentials.rst

@@ -196,7 +196,7 @@ The Linux kernel supports the following types of credentials:
      When a process accesses a key, if not already present, it will normally be
      cached on one of these keyrings for future accesses to find.
 
-     For more information on using keys, see Documentation/security/keys.txt.
+     For more information on using keys, see ``Documentation/security/keys/*``.
 
  5. LSM
 

Documentation/security/keys/request-key.rst

@@ -3,7 +3,7 @@ Key Request Service
 ===================
 
 The key request service is part of the key retention service (refer to
-Documentation/security/core.rst).  This document explains more fully how
+Documentation/security/keys/core.rst).  This document explains more fully how
 the requesting algorithm works.
 
 The process starts by either the kernel requesting a service by calling

Documentation/sound/cards/joystick.rst

@@ -11,7 +11,7 @@ General
 
 First of all, you need to enable GAMEPORT support on Linux kernel for
 using a joystick with the ALSA driver.  For the details of gameport
-support, refer to Documentation/input/joystick.txt.
+support, refer to Documentation/input/joydev/joystick.rst.
 
 The joystick support of ALSA drivers is different between ISA and PCI
 cards.  In the case of ISA (PnP) cards, it's usually handled by the

Documentation/sound/hd-audio/notes.rst

@@ -192,7 +192,7 @@ preset model instead of PCI (and codec-) SSID look-up.
 What ``model`` option values are available depends on the codec chip.
 Check your codec chip from the codec proc file (see "Codec Proc-File"
 section below).  It will show the vendor/product name of your codec
-chip.  Then, see Documentation/sound/HD-Audio-Models.rst file,
+chip.  Then, see Documentation/sound/hd-audio/models.rst file,
 the section of HD-audio driver.  You can find a list of codecs
 and ``model`` options belonging to each codec.  For example, for Realtek
 ALC262 codec chip, pass ``model=ultra`` for devices that are compatible

Documentation/sound/kernel-api/writing-an-alsa-driver.rst

@@ -2498,7 +2498,7 @@ Mic boost
 Mic-boost switch is set as “Mic Boost” or “Mic Boost (6dB)”.
 
 More precise information can be found in
-``Documentation/sound/alsa/ControlNames.txt``.
+``Documentation/sound/designs/control-names.rst``.
 
 Access Flags
 ------------

Documentation/sysctl/README

@@ -60,7 +60,7 @@ debug/		<empty>
 dev/		device specific information (eg dev/cdrom/info)
 fs/		specific filesystems
 		filehandle, inode, dentry and quota tuning
-		binfmt_misc <Documentation/binfmt_misc.txt>
+		binfmt_misc <Documentation/admin-guide/binfmt-misc.rst>
 kernel/		global kernel info / tuning
 		miscellaneous stuff
 net/		networking stuff, for documentation look in:

Documentation/sysctl/fs.txt

@@ -277,7 +277,7 @@ in a mount namespace.
 ----------------------------------------------------------
 
 Documentation for the files in /proc/sys/fs/binfmt_misc is
-in Documentation/binfmt_misc.txt.
+in Documentation/admin-guide/binfmt-misc.rst.
 
 
 3. /proc/sys/fs/mqueue - POSIX message queues filesystem

Documentation/timers/highres.txt

@@ -4,10 +4,10 @@ High resolution timers and dynamic ticks design notes
 Further information can be found in the paper of the OLS 2006 talk "hrtimers
 and beyond". The paper is part of the OLS 2006 Proceedings Volume 1, which can
 be found on the OLS website:
-http://www.linuxsymposium.org/2006/linuxsymposium_procv1.pdf
+https://www.kernel.org/doc/ols/2006/ols2006v1-pages-333-346.pdf
 
 The slides to this talk are available from:
-http://tglx.de/projects/hrtimers/ols2006-hrtimers.pdf
+http://www.cs.columbia.edu/~nahum/w6998/papers/ols2006-hrtimers-slides.pdf
 
 The slides contain five figures (pages 2, 15, 18, 20, 22), which illustrate the
 changes in the time(r) related Linux subsystems. Figure #1 (p. 2) shows the

Documentation/trace/intel_th.txt

@@ -37,7 +37,7 @@ description is at Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth.
 
 STH registers an stm class device, through which it provides interface
 to userspace and kernelspace software trace sources. See
-Documentation/tracing/stm.txt for more information on that.
+Documentation/trace/stm.txt for more information on that.
 
 MSU can be configured to collect trace data into a system memory
 buffer, which can later on be read from its device nodes via read() or

Documentation/usb/gadget-testing.txt

@@ -773,7 +773,7 @@ host:
 # cat /dev/usb/lp0
 
 More advanced testing can be done with the prn_example
-described in Documentation/usb/gadget-printer.txt.
+described in Documentation/usb/gadget_printer.txt.
 
 
 20. UAC1 function (virtual ALSA card, using u_audio API)

Documentation/watchdog/hpwdt.txt

@@ -15,7 +15,7 @@ Last reviewed: 05/20/2016
 
  Watchdog functionality is enabled like any other common watchdog driver. That
  is, an application needs to be started that kicks off the watchdog timer. A
- basic application exists in the Documentation/watchdog/src directory called
+ basic application exists in tools/testing/selftests/watchdog/ named
  watchdog-test.c. Simply compile the C file and kick it off. If the system
  gets into a bad state and hangs, the HPE ProLiant iLO timer register will
  not be updated in a timely fashion and a hardware system reset (also known as

Documentation/watchdog/pcwd-watchdog.txt

@@ -25,7 +25,7 @@ Last reviewed: 10/05/2007
 
  If you want to write a program to be compatible with the PC Watchdog
  driver, simply use of modify the watchdog test program:
- Documentation/watchdog/src/watchdog-test.c
+ tools/testing/selftests/watchdog/watchdog-test.c
 
 
  Other IOCTL functions include:

MAINTAINERS

@@ -4234,7 +4234,7 @@ S:	Maintained
 F:	drivers/dma/
 F:	include/linux/dmaengine.h
 F:	Documentation/devicetree/bindings/dma/
-F:	Documentation/dmaengine/
+F:	Documentation/driver-api/dmaengine/
 T:	git git://git.infradead.org/users/vkoul/slave-dma.git
 
 DMA MAPPING HELPERS

Makefile

@@ -1459,7 +1459,8 @@ $(help-board-dirs): help-%:
 
 # Documentation targets
 # ---------------------------------------------------------------------------
-DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs linkcheckdocs
+DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
+	       linkcheckdocs dochelp refcheckdocs
 PHONY += $(DOC_TARGETS)
 $(DOC_TARGETS): scripts_basic FORCE
 	$(Q)$(MAKE) $(build)=Documentation $@

include/asm-generic/div64.h

@@ -26,6 +26,20 @@
 
 #if BITS_PER_LONG == 64
 
+/**
+ * do_div - returns 2 values: calculate remainder and update new dividend
+ * @n: pointer to uint64_t dividend (will be updated)
+ * @base: uint32_t divisor
+ *
+ * Summary:
+ * ``uint32_t remainder = *n % base;``
+ * ``*n = *n / base;``
+ *
+ * Return: (uint32_t)remainder
+ *
+ * NOTE: macro parameter @n is evaluated multiple times,
+ * beware of side effects!
+ */
 # define do_div(n,base) ({					\
 	uint32_t __base = (base);				\
 	uint32_t __rem;						\

include/linux/bitmap.h

@@ -22,65 +22,74 @@
  * See lib/bitmap.c for more details.
  */
 
-/*
+/**
+ * DOC: bitmap overview
+ *
  * The available bitmap operations and their rough meaning in the
  * case that the bitmap is a single unsigned long are thus:
  *
  * Note that nbits should be always a compile time evaluable constant.
  * Otherwise many inlines will generate horrible code.
  *
- * bitmap_zero(dst, nbits)			*dst = 0UL
- * bitmap_fill(dst, nbits)			*dst = ~0UL
- * bitmap_copy(dst, src, nbits)			*dst = *src
- * bitmap_and(dst, src1, src2, nbits)		*dst = *src1 & *src2
- * bitmap_or(dst, src1, src2, nbits)		*dst = *src1 | *src2
- * bitmap_xor(dst, src1, src2, nbits)		*dst = *src1 ^ *src2
- * bitmap_andnot(dst, src1, src2, nbits)	*dst = *src1 & ~(*src2)
- * bitmap_complement(dst, src, nbits)		*dst = ~(*src)
- * bitmap_equal(src1, src2, nbits)		Are *src1 and *src2 equal?
- * bitmap_intersects(src1, src2, nbits) 	Do *src1 and *src2 overlap?
- * bitmap_subset(src1, src2, nbits)		Is *src1 a subset of *src2?
- * bitmap_empty(src, nbits)			Are all bits zero in *src?
- * bitmap_full(src, nbits)			Are all bits set in *src?
- * bitmap_weight(src, nbits)			Hamming Weight: number set bits
- * bitmap_set(dst, pos, nbits)			Set specified bit area
- * bitmap_clear(dst, pos, nbits)		Clear specified bit area
- * bitmap_find_next_zero_area(buf, len, pos, n, mask)	Find bit free area
- * bitmap_find_next_zero_area_off(buf, len, pos, n, mask)	as above
- * bitmap_shift_right(dst, src, n, nbits)	*dst = *src >> n
- * bitmap_shift_left(dst, src, n, nbits)	*dst = *src << n
- * bitmap_remap(dst, src, old, new, nbits)	*dst = map(old, new)(src)
- * bitmap_bitremap(oldbit, old, new, nbits)	newbit = map(old, new)(oldbit)
- * bitmap_onto(dst, orig, relmap, nbits)	*dst = orig relative to relmap
- * bitmap_fold(dst, orig, sz, nbits)		dst bits = orig bits mod sz
- * bitmap_parse(buf, buflen, dst, nbits)	Parse bitmap dst from kernel buf
- * bitmap_parse_user(ubuf, ulen, dst, nbits)	Parse bitmap dst from user buf
- * bitmap_parselist(buf, dst, nbits)		Parse bitmap dst from kernel buf
- * bitmap_parselist_user(buf, dst, nbits)	Parse bitmap dst from user buf
- * bitmap_find_free_region(bitmap, bits, order)	Find and allocate bit region
- * bitmap_release_region(bitmap, pos, order)	Free specified bit region
- * bitmap_allocate_region(bitmap, pos, order)	Allocate specified bit region
- * bitmap_from_u32array(dst, nbits, buf, nwords) *dst = *buf (nwords 32b words)
- * bitmap_to_u32array(buf, nwords, src, nbits)	*buf = *dst (nwords 32b words)
+ * ::
+ *
+ *  bitmap_zero(dst, nbits)                     *dst = 0UL
+ *  bitmap_fill(dst, nbits)                     *dst = ~0UL
+ *  bitmap_copy(dst, src, nbits)                *dst = *src
+ *  bitmap_and(dst, src1, src2, nbits)          *dst = *src1 & *src2
+ *  bitmap_or(dst, src1, src2, nbits)           *dst = *src1 | *src2
+ *  bitmap_xor(dst, src1, src2, nbits)          *dst = *src1 ^ *src2
+ *  bitmap_andnot(dst, src1, src2, nbits)       *dst = *src1 & ~(*src2)
+ *  bitmap_complement(dst, src, nbits)          *dst = ~(*src)
+ *  bitmap_equal(src1, src2, nbits)             Are *src1 and *src2 equal?
+ *  bitmap_intersects(src1, src2, nbits)        Do *src1 and *src2 overlap?
+ *  bitmap_subset(src1, src2, nbits)            Is *src1 a subset of *src2?
+ *  bitmap_empty(src, nbits)                    Are all bits zero in *src?
+ *  bitmap_full(src, nbits)                     Are all bits set in *src?
+ *  bitmap_weight(src, nbits)                   Hamming Weight: number set bits
+ *  bitmap_set(dst, pos, nbits)                 Set specified bit area
+ *  bitmap_clear(dst, pos, nbits)               Clear specified bit area
+ *  bitmap_find_next_zero_area(buf, len, pos, n, mask)  Find bit free area
+ *  bitmap_find_next_zero_area_off(buf, len, pos, n, mask)  as above
+ *  bitmap_shift_right(dst, src, n, nbits)      *dst = *src >> n
+ *  bitmap_shift_left(dst, src, n, nbits)       *dst = *src << n
+ *  bitmap_remap(dst, src, old, new, nbits)     *dst = map(old, new)(src)
+ *  bitmap_bitremap(oldbit, old, new, nbits)    newbit = map(old, new)(oldbit)
+ *  bitmap_onto(dst, orig, relmap, nbits)       *dst = orig relative to relmap
+ *  bitmap_fold(dst, orig, sz, nbits)           dst bits = orig bits mod sz
+ *  bitmap_parse(buf, buflen, dst, nbits)       Parse bitmap dst from kernel buf
+ *  bitmap_parse_user(ubuf, ulen, dst, nbits)   Parse bitmap dst from user buf
+ *  bitmap_parselist(buf, dst, nbits)           Parse bitmap dst from kernel buf
+ *  bitmap_parselist_user(buf, dst, nbits)      Parse bitmap dst from user buf
+ *  bitmap_find_free_region(bitmap, bits, order)  Find and allocate bit region
+ *  bitmap_release_region(bitmap, pos, order)   Free specified bit region
+ *  bitmap_allocate_region(bitmap, pos, order)  Allocate specified bit region
+ *  bitmap_from_u32array(dst, nbits, buf, nwords)  *dst = *buf (nwords 32b words)
+ *  bitmap_to_u32array(buf, nwords, src, nbits) *buf = *dst (nwords 32b words)
+ *
  */
 
-/*
- * Also the following operations in asm/bitops.h apply to bitmaps.
+/**
+ * DOC: bitmap bitops
+ *
+ * Also the following operations in asm/bitops.h apply to bitmaps.::
+ *
+ *  set_bit(bit, addr)                  *addr |= bit
+ *  clear_bit(bit, addr)                *addr &= ~bit
+ *  change_bit(bit, addr)               *addr ^= bit
+ *  test_bit(bit, addr)                 Is bit set in *addr?
+ *  test_and_set_bit(bit, addr)         Set bit and return old value
+ *  test_and_clear_bit(bit, addr)       Clear bit and return old value
+ *  test_and_change_bit(bit, addr)      Change bit and return old value
+ *  find_first_zero_bit(addr, nbits)    Position first zero bit in *addr
+ *  find_first_bit(addr, nbits)         Position first set bit in *addr
+ *  find_next_zero_bit(addr, nbits, bit)  Position next zero bit in *addr >= bit
+ *  find_next_bit(addr, nbits, bit)     Position next set bit in *addr >= bit
  *
- * set_bit(bit, addr)			*addr |= bit
- * clear_bit(bit, addr)			*addr &= ~bit
- * change_bit(bit, addr)		*addr ^= bit
- * test_bit(bit, addr)			Is bit set in *addr?
- * test_and_set_bit(bit, addr)		Set bit and return old value
- * test_and_clear_bit(bit, addr)	Clear bit and return old value
- * test_and_change_bit(bit, addr)	Change bit and return old value
- * find_first_zero_bit(addr, nbits)	Position first zero bit in *addr
- * find_first_bit(addr, nbits)		Position first set bit in *addr
- * find_next_zero_bit(addr, nbits, bit)	Position next zero bit in *addr >= bit
- * find_next_bit(addr, nbits, bit)	Position next set bit in *addr >= bit
  */
 
-/*
+/**
+ * DOC: declare bitmap
  * The DECLARE_BITMAP(name,bits) macro, in linux/types.h, can be used
  * to declare an array named 'name' of just enough unsigned longs to
  * contain all bit positions from 0 to 'bits' - 1.
@@ -361,8 +370,9 @@ static inline int bitmap_parse(const char *buf, unsigned int buflen,
 	return __bitmap_parse(buf, buflen, 0, maskp, nmaskbits);
 }
 
-/*
+/**
  * BITMAP_FROM_U64() - Represent u64 value in the format suitable for bitmap.
+ * @n: u64 value
  *
  * Linux bitmaps are internally arrays of unsigned longs, i.e. 32-bit
  * integers in 32-bit environment, and 64-bit integers in 64-bit one.
@@ -393,14 +403,14 @@ static inline int bitmap_parse(const char *buf, unsigned int buflen,
 				((unsigned long) ((u64)(n) >> 32))
 #endif
 
-/*
+/**
  * bitmap_from_u64 - Check and swap words within u64.
  *  @mask: source bitmap
  *  @dst:  destination bitmap
  *
- * In 32-bit Big Endian kernel, when using (u32 *)(&val)[*]
+ * In 32-bit Big Endian kernel, when using ``(u32 *)(&val)[*]``
  * to read u64 mask, we will get the wrong word.
- * That is "(u32 *)(&val)[0]" gets the upper 32 bits,
+ * That is ``(u32 *)(&val)[0]`` gets the upper 32 bits,
  * but we expect the lower 32-bits of u64.
  */
 static inline void bitmap_from_u64(unsigned long *dst, u64 mask)

include/linux/log2.h

@@ -37,19 +37,23 @@ int __ilog2_u64(u64 n)
 }
 #endif
 
-/*
- *  Determine whether some value is a power of two, where zero is
+/**
+ * is_power_of_2() - check if a value is a power of two
+ * @n: the value to check
+ *
+ * Determine whether some value is a power of two, where zero is
  * *not* considered a power of two.
+ * Return: true if @n is a power of 2, otherwise false.
  */
-
 static inline __attribute__((const))
 bool is_power_of_2(unsigned long n)
 {
 	return (n != 0 && ((n & (n - 1)) == 0));
 }
 
-/*
- * round up to nearest power of two
+/**
+ * __roundup_pow_of_two() - round up to nearest power of two
+ * @n: value to round up
  */
 static inline __attribute__((const))
 unsigned long __roundup_pow_of_two(unsigned long n)
@@ -57,8 +61,9 @@ unsigned long __roundup_pow_of_two(unsigned long n)
 	return 1UL << fls_long(n - 1);
 }
 
-/*
- * round down to nearest power of two
+/**
+ * __rounddown_pow_of_two() - round down to nearest power of two
+ * @n: value to round down
  */
 static inline __attribute__((const))
 unsigned long __rounddown_pow_of_two(unsigned long n)
@@ -67,12 +72,12 @@ unsigned long __rounddown_pow_of_two(unsigned long n)
 }
 
 /**
- * ilog2 - log of base 2 of 32-bit or a 64-bit unsigned value
- * @n - parameter
+ * ilog2 - log base 2 of 32-bit or a 64-bit unsigned value
+ * @n: parameter
  *
  * constant-capable log of base 2 calculation
  * - this can be used to initialise global variables from constant data, hence
- *   the massive ternary operator construction
+ * the massive ternary operator construction
  *
  * selects the appropriately-sized optimised version depending on sizeof(n)
  */
@@ -150,7 +155,7 @@ unsigned long __rounddown_pow_of_two(unsigned long n)
 
 /**
  * roundup_pow_of_two - round the given value up to nearest power of two
- * @n - parameter
+ * @n: parameter
  *
  * round the given value up to the nearest power of two
  * - the result is undefined when n == 0
@@ -167,7 +172,7 @@ unsigned long __rounddown_pow_of_two(unsigned long n)
 
 /**
  * rounddown_pow_of_two - round the given value down to nearest power of two
- * @n - parameter
+ * @n: parameter
  *
  * round the given value down to the nearest power of two
  * - the result is undefined when n == 0
@@ -180,6 +185,12 @@ unsigned long __rounddown_pow_of_two(unsigned long n)
 	__rounddown_pow_of_two(n)		\
  )
 
+static inline __attribute_const__
+int __order_base_2(unsigned long n)
+{
+	return n > 1 ? ilog2(n - 1) + 1 : 0;
+}
+
 /**
  * order_base_2 - calculate the (rounded up) base 2 order of the argument
  * @n: parameter
@@ -193,13 +204,6 @@ unsigned long __rounddown_pow_of_two(unsigned long n)
  *  ob2(5) = 3
  *  ... and so on.
  */
-
-static inline __attribute_const__
-int __order_base_2(unsigned long n)
-{
-	return n > 1 ? ilog2(n - 1) + 1 : 0;
-}
-
 #define order_base_2(n)				\
 (						\
 	__builtin_constant_p(n) ? (		\

include/linux/math64.h

@@ -12,6 +12,11 @@
 
 /**
  * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder
+ * @dividend: unsigned 64bit dividend
+ * @divisor: unsigned 32bit divisor
+ * @remainder: pointer to unsigned 32bit remainder
+ *
+ * Return: sets ``*remainder``, then returns dividend / divisor
  *
  * This is commonly provided by 32bit archs to provide an optimized 64bit
  * divide.
@@ -24,6 +29,11 @@ static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
 
 /**
  * div_s64_rem - signed 64bit divide with 32bit divisor with remainder
+ * @dividend: signed 64bit dividend
+ * @divisor: signed 32bit divisor
+ * @remainder: pointer to signed 32bit remainder
+ *
+ * Return: sets ``*remainder``, then returns dividend / divisor
  */
 static inline s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder)
 {
@@ -33,6 +43,11 @@ static inline s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder)
 
 /**
  * div64_u64_rem - unsigned 64bit divide with 64bit divisor and remainder
+ * @dividend: unsigned 64bit dividend
+ * @divisor: unsigned 64bit divisor
+ * @remainder: pointer to unsigned 64bit remainder
+ *
+ * Return: sets ``*remainder``, then returns dividend / divisor
  */
 static inline u64 div64_u64_rem(u64 dividend, u64 divisor, u64 *remainder)
 {
@@ -42,6 +57,10 @@ static inline u64 div64_u64_rem(u64 dividend, u64 divisor, u64 *remainder)
 
 /**
  * div64_u64 - unsigned 64bit divide with 64bit divisor
+ * @dividend: unsigned 64bit dividend
+ * @divisor: unsigned 64bit divisor
+ *
+ * Return: dividend / divisor
  */
 static inline u64 div64_u64(u64 dividend, u64 divisor)
 {
@@ -50,6 +69,10 @@ static inline u64 div64_u64(u64 dividend, u64 divisor)
 
 /**
  * div64_s64 - signed 64bit divide with 64bit divisor
+ * @dividend: signed 64bit dividend
+ * @divisor: signed 64bit divisor
+ *
+ * Return: dividend / divisor
  */
 static inline s64 div64_s64(s64 dividend, s64 divisor)
 {
@@ -89,6 +112,8 @@ extern s64 div64_s64(s64 dividend, s64 divisor);
 
 /**
  * div_u64 - unsigned 64bit divide with 32bit divisor
+ * @dividend: unsigned 64bit dividend
+ * @divisor: unsigned 32bit divisor
  *
  * This is the most common 64bit divide and should be used if possible,
  * as many 32bit archs can optimize this variant better than a full 64bit
@@ -104,6 +129,8 @@ static inline u64 div_u64(u64 dividend, u32 divisor)
 
 /**
  * div_s64 - signed 64bit divide with 32bit divisor
+ * @dividend: signed 64bit dividend
+ * @divisor: signed 32bit divisor
  */
 #ifndef div_s64
 static inline s64 div_s64(s64 dividend, s32 divisor)

lib/bitmap.c

@@ -18,7 +18,9 @@
 
 #include <asm/page.h>
 
-/*
+/**
+ * DOC: bitmap introduction
+ *
  * bitmaps provide an array of bits, implemented using an an
  * array of unsigned longs.  The number of valid bits in a
  * given bitmap does _not_ need to be an exact multiple of

lib/crc32.c

@@ -225,7 +225,7 @@ static u32 __attribute_const__ gf2_multiply(u32 x, u32 y, u32 modulus)
 }
 
 /**
- * crc32_generic_shift - Append len 0 bytes to crc, in logarithmic time
+ * crc32_generic_shift - Append @len 0 bytes to crc, in logarithmic time
  * @crc: The original little-endian CRC (i.e. lsbit is x^31 coefficient)
  * @len: The number of bytes. @crc is multiplied by x^(8*@len)
  * @polynomial: The modulus used to reduce the result to 32 bits.

lib/crc4.c

@@ -15,7 +15,7 @@ static const uint8_t crc4_tab[] = {
 
 /**
  * crc4 - calculate the 4-bit crc of a value.
- * @crc:  starting crc4
+ * @c:    starting crc4
  * @x:    value to checksum
  * @bits: number of bits in @x to checksum
  *

lib/crc8.c

@@ -20,11 +20,11 @@
 #include <linux/crc8.h>
 #include <linux/printk.h>
 
-/*
+/**
  * crc8_populate_msb - fill crc table for given polynomial in reverse bit order.
  *
- * table:	table to be filled.
- * polynomial:	polynomial for which table is to be filled.
+ * @table:	table to be filled.
+ * @polynomial:	polynomial for which table is to be filled.
  */
 void crc8_populate_msb(u8 table[CRC8_TABLE_SIZE], u8 polynomial)
 {
@@ -42,11 +42,11 @@ void crc8_populate_msb(u8 table[CRC8_TABLE_SIZE], u8 polynomial)
 }
 EXPORT_SYMBOL(crc8_populate_msb);
 
-/*
+/**
  * crc8_populate_lsb - fill crc table for given polynomial in regular bit order.
  *
- * table:	table to be filled.
- * polynomial:	polynomial for which table is to be filled.
+ * @table:	table to be filled.
+ * @polynomial:	polynomial for which table is to be filled.
  */
 void crc8_populate_lsb(u8 table[CRC8_TABLE_SIZE], u8 polynomial)
 {
@@ -63,13 +63,13 @@ void crc8_populate_lsb(u8 table[CRC8_TABLE_SIZE], u8 polynomial)
 }
 EXPORT_SYMBOL(crc8_populate_lsb);
 
-/*
+/**
  * crc8 - calculate a crc8 over the given input data.
  *
- * table: crc table used for calculation.
- * pdata: pointer to data buffer.
- * nbytes: number of bytes in data buffer.
- * crc:	previous returned crc8 value.
+ * @table: crc table used for calculation.
+ * @pdata: pointer to data buffer.
+ * @nbytes: number of bytes in data buffer.
+ * @crc: previous returned crc8 value.
  */
 u8 crc8(const u8 table[CRC8_TABLE_SIZE], u8 *pdata, size_t nbytes, u8 crc)
 {

lib/div64.c

@@ -61,6 +61,12 @@ uint32_t __attribute__((weak)) __div64_32(uint64_t *n, uint32_t base)
 EXPORT_SYMBOL(__div64_32);
 #endif
 
+/**
+ * div_s64_rem - signed 64bit divide with 64bit divisor and remainder
+ * @dividend:	64bit dividend
+ * @divisor:	64bit divisor
+ * @remainder:  64bit remainder
+ */
 #ifndef div_s64_rem
 s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder)
 {

lib/gcd.c

@@ -13,6 +13,12 @@
 #if !defined(CONFIG_CPU_NO_EFFICIENT_FFS) && !defined(CPU_NO_EFFICIENT_FFS)
 
 /* If __ffs is available, the even/odd algorithm benchmarks slower. */
+
+/**
+ * gcd - calculate and return the greatest common divisor of 2 unsigned longs
+ * @a: first value
+ * @b: second value
+ */
 unsigned long gcd(unsigned long a, unsigned long b)
 {
 	unsigned long r = a | b;

samples/connector/cn_test.c

@@ -125,12 +125,12 @@ static int cn_test_want_notify(void)
 #endif
 
 static u32 cn_test_timer_counter;
-static void cn_test_timer_func(unsigned long __data)
+static void cn_test_timer_func(struct timer_list *unused)
 {
 	struct cn_msg *m;
 	char data[32];
 
-	pr_debug("%s: timer fired with data %lu\n", __func__, __data);
+	pr_debug("%s: timer fired\n", __func__);
 
 	m = kzalloc(sizeof(*m) + sizeof(data), GFP_ATOMIC);
 	if (m) {
@@ -168,7 +168,7 @@ static int cn_test_init(void)
 		goto err_out;
 	}
 
-	setup_timer(&cn_test_timer, cn_test_timer_func, 0);
+	timer_setup(&cn_test_timer, cn_test_timer_func, 0);
 	mod_timer(&cn_test_timer, jiffies + msecs_to_jiffies(1000));
 
 	pr_info("initialized with id={%u.%u}\n",

scripts/documentation-file-ref-check

+#!/bin/sh
+# Treewide grep for references to files under Documentation, and report
+# non-existing files in stderr.
+
+for f in $(git ls-files); do
+	for ref in $(grep -ho "Documentation/[A-Za-z0-9_.,~/*+-]*" "$f"); do
+		# presume trailing . and , are not part of the name
+		ref=${ref%%[.,]}
+
+		# use ls to handle wildcards
+		if ! ls $ref >/dev/null 2>&1; then
+			echo "$f: $ref" >&2
+		fi
+	done
+done

scripts/find-unused-docs.sh

+#!/bin/bash
+# (c) 2017, Jonathan Corbet <corbet@lwn.net>
+#           sayli karnik <karniksayli1995@gmail.com>
+#
+# This script detects files with kernel-doc comments for exported functions
+# that are not included in documentation.
+#
+# usage: Run 'scripts/find-unused-docs.sh directory' from top level of kernel
+# 	 tree.
+#
+# example: $scripts/find-unused-docs.sh drivers/scsi
+#
+# Licensed under the terms of the GNU GPL License
+
+if ! [ -d "Documentation" ]; then
+	echo "Run from top level of kernel tree"
+	exit 1
+fi
+
+if [ "$#" -ne 1 ]; then
+	echo "Usage: scripts/find-unused-docs.sh directory"
+	exit 1
+fi
+
+if ! [ -d "$1" ]; then
+	echo "Directory $1 doesn't exist"
+	exit 1
+fi
+
+cd "$( dirname "${BASH_SOURCE[0]}" )"
+cd ..
+
+cd Documentation/
+
+echo "The following files contain kerneldoc comments for exported functions \
+that are not used in the formatted documentation"
+
+# FILES INCLUDED
+
+files_included=($(grep -rHR ".. kernel-doc" --include \*.rst | cut -d " " -f 3))
+
+declare -A FILES_INCLUDED
+
+for each in "${files_included[@]}"; do
+	FILES_INCLUDED[$each]="$each"
+	done
+
+cd ..
+
+# FILES NOT INCLUDED
+
+for file in `find $1 -name '*.c'`; do
+
+	if [[ ${FILES_INCLUDED[$file]+_} ]]; then
+	continue;
+	fi
+	str=$(scripts/kernel-doc -text -export "$file" 2>/dev/null)
+	if [[ -n "$str" ]]; then
+	echo "$file"
+	fi
+	done
+

scripts/kernel-doc

@@ -2168,7 +2168,7 @@ sub dump_struct($$) {
     my $nested;
 
     if ($x =~ /(struct|union)\s+(\w+)\s*{(.*)}/) {
-	#my $decl_type = $1;
+	my $decl_type = $1;
 	$declaration_name = $2;
 	my $members = $3;
 
@@ -2194,7 +2194,7 @@ sub dump_struct($$) {
 	$members =~ s/DECLARE_HASHTABLE\s*\(([^,)]+), ([^,)]+)\)/unsigned long $1\[1 << (($2) - 1)\]/gos;
 
 	create_parameterlist($members, ';', $file);
-	check_sections($file, $declaration_name, "struct", $sectcheck, $struct_actual, $nested);
+	check_sections($file, $declaration_name, $decl_type, $sectcheck, $struct_actual, $nested);
 
 	output_declaration($declaration_name,
 			   'struct',
@@ -2226,6 +2226,8 @@ sub dump_enum($$) {
     if ($x =~ /enum\s+(\w+)\s*{(.*)}/) {
 	$declaration_name = $1;
 	my $members = $2;
+	my %_members;
+
 	$members =~ s/\s+$//;
 
 	foreach my $arg (split ',', $members) {
@@ -2236,9 +2238,16 @@ sub dump_enum($$) {
 		print STDERR "${file}:$.: warning: Enum value '$arg' ".
 		    "not described in enum '$declaration_name'\n";
 	    }
-
+	    $_members{$arg} = 1;
 	}
 
+	while (my ($k, $v) = each %parameterdescs) {
+	    if (!exists($_members{$k})) {
+	     print STDERR "${file}:$.: warning: Excess enum value " .
+	                  "'$k' description in '$declaration_name'\n";
+	    }
+        }
+
 	output_declaration($declaration_name,
 			   'enum',
 			   {'enum' => $declaration_name,
@@ -2506,7 +2515,7 @@ sub check_sections($$$$$$) {
 			} else {
 				if ($nested !~ m/\Q$sects[$sx]\E/) {
 				    print STDERR "${file}:$.: warning: " .
-					"Excess struct/union/enum/typedef member " .
+					"Excess $decl_type member " .
 					"'$sects[$sx]' " .
 					"description in '$decl_name'\n";
 				    ++$warnings;