Commit 78f9f3b1 authored by Sebastian Hesselbarth's avatar Sebastian Hesselbarth Committed by Jason Cooper

pinctrl: mvebu: fix iomem pointer for dove pinctrl

There has been a change in readl/writel to require registers
addresses marked as IOMEM(). This patch takes care of this and
also replaces ORing address offsets with adding them.
Signed-off-by: default avatarSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 423b8959
...@@ -22,22 +22,22 @@ ...@@ -22,22 +22,22 @@
#include "pinctrl-mvebu.h" #include "pinctrl-mvebu.h"
#define DOVE_SB_REGS_VIRT_BASE 0xfde00000 #define DOVE_SB_REGS_VIRT_BASE IOMEM(0xfde00000)
#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200) #define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0200)
#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10) #define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
#define DOVE_AU0_AC97_SEL BIT(16) #define DOVE_AU0_AC97_SEL BIT(16)
#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C) #define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE + 0xe802C)
#define DOVE_TWSI_ENABLE_OPTION1 BIT(7) #define DOVE_TWSI_ENABLE_OPTION1 BIT(7)
#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030) #define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE + 0xe8030)
#define DOVE_TWSI_ENABLE_OPTION2 BIT(20) #define DOVE_TWSI_ENABLE_OPTION2 BIT(20)
#define DOVE_TWSI_ENABLE_OPTION3 BIT(21) #define DOVE_TWSI_ENABLE_OPTION3 BIT(21)
#define DOVE_TWSI_OPTION3_GPIO BIT(22) #define DOVE_TWSI_OPTION3_GPIO BIT(22)
#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034) #define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE + 0xe8034)
#define DOVE_SSP_ON_AU1 BIT(0) #define DOVE_SSP_ON_AU1 BIT(0)
#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c) #define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe803c)
#define DOVE_AU1_SPDIFO_GPIO_EN BIT(1) #define DOVE_AU1_SPDIFO_GPIO_EN BIT(1)
#define DOVE_NAND_GPIO_EN BIT(0) #define DOVE_NAND_GPIO_EN BIT(0)
#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400) #define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0400)
#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40) #define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40)
#define DOVE_SPI_GPIO_SEL BIT(5) #define DOVE_SPI_GPIO_SEL BIT(5)
#define DOVE_UART1_GPIO_SEL BIT(4) #define DOVE_UART1_GPIO_SEL BIT(4)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment