Commit 7a0d8849 authored by Ryan Lee's avatar Ryan Lee Committed by Mark Brown

ASoC: max98373: Added controls for autorestart config

3 new controls are added.
"OVC Autorestart Switch" : controls whether or not the speaker amplifier
automatically re-enables after an overcurrent fault condition.
"THERM Autorestart Switch" : controls whether or not the device
automatically resumes playback when the die temperature recovers from
thermal shutdown.
"CMON Autorestart Switch" : controls whether or not the device
automatically resumes playback when the clock returns after stopping.

Above Auto Restart functions are enabled by default.
Signed-off-by: default avatarRyan Lee <ryans.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20210325033555.29377-3-ryans.lee@maximintegrated.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 9f44673b
......@@ -202,6 +202,15 @@ SOC_SINGLE("Ramp Up Switch", MAX98373_R203F_AMP_DSP_CFG,
MAX98373_AMP_DSP_CFG_RMP_UP_SHIFT, 1, 0),
SOC_SINGLE("Ramp Down Switch", MAX98373_R203F_AMP_DSP_CFG,
MAX98373_AMP_DSP_CFG_RMP_DN_SHIFT, 1, 0),
/* Speaker Amplifier Overcurrent Automatic Restart Enable */
SOC_SINGLE("OVC Autorestart Switch", MAX98373_R20FE_DEVICE_AUTO_RESTART_CFG,
MAX98373_OVC_AUTORESTART_SHIFT, 1, 0),
/* Thermal Shutdown Automatic Restart Enable */
SOC_SINGLE("THERM Autorestart Switch", MAX98373_R20FE_DEVICE_AUTO_RESTART_CFG,
MAX98373_THERM_AUTORESTART_SHIFT, 1, 0),
/* Clock Monitor Automatic Restart Enable */
SOC_SINGLE("CMON Autorestart Switch", MAX98373_R20FE_DEVICE_AUTO_RESTART_CFG,
MAX98373_CMON_AUTORESTART_SHIFT, 1, 0),
SOC_SINGLE("CLK Monitor Switch", MAX98373_R20FE_DEVICE_AUTO_RESTART_CFG,
MAX98373_CLOCK_MON_SHIFT, 1, 0),
SOC_SINGLE("Dither Switch", MAX98373_R203F_AMP_DSP_CFG,
......@@ -390,6 +399,11 @@ static int max98373_probe(struct snd_soc_component *component)
MAX98373_R2021_PCM_TX_HIZ_EN_2,
1 << (max98373->i_slot - 8), 0);
/* enable auto restart function by default */
regmap_write(max98373->regmap,
MAX98373_R20FE_DEVICE_AUTO_RESTART_CFG,
0xF);
/* speaker feedback slot configuration */
regmap_write(max98373->regmap,
MAX98373_R2023_PCM_TX_SRC_2,
......
......@@ -195,6 +195,9 @@
#define MAX98373_LIMITER_EN_SHIFT (0)
/* MAX98373_R20FE_DEVICE_AUTO_RESTART_CFG */
#define MAX98373_OVC_AUTORESTART_SHIFT (3)
#define MAX98373_THERM_AUTORESTART_SHIFT (2)
#define MAX98373_CMON_AUTORESTART_SHIFT (1)
#define MAX98373_CLOCK_MON_SHIFT (0)
/* MAX98373_R20FF_GLOBAL_SHDN */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment