Merge tag 'sunxi-dt-for-3.12' of https://github.com/mripard/linux into next/dt

Allwinner sunXi DT additions for 3.12

  - Cleanups and few fixes to the DTSI
  - A few additions to the A10s olinuxino board

* tag 'sunxi-dt-for-3.12' of https://github.com/mripard/linux:
  ARM: sunxi: dt: Add device tree for Mele A1000
  ARM: sun5i: dt: Fix A13 SoC bus base address
  ARM: sun5i: a13: Remove useless simple-bus reg property
  ARM: sun5i: dt: Fix A10s SoC bus base address
  ARM: sun5i: a10s: Remove useless simple-bus reg property
  ARM: sun4i: dt: Fix A10 SoC bus base address
  ARM: sun4i: a10: Remove useless simple-bus reg property
  ARM: sunxi: make the leds' names conform to the current naming convention
  ARM: sun5i: dt: Add AT24 device on A10S-OLinuXino-Micro
  ARM: sun5i: dt: Enable I2C controllers on A10S-OLinuXino-Micro
  ARM: sun5i: dt: Add I2C controller nodes to the A10S dtsi
  ARM: sun5i: dt: Add I2C muxings for sun5i A10S
Signed-off-by: Kevin Hilman <khilman@linaro.org>

arch/arm/boot/dts/Makefile

@@ -208,6 +208,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \
 	stih415-b2020.dtb \
 	stih416-b2020.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += \
+	sun4i-a10-a1000.dtb \
 	sun4i-a10-cubieboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
 	sun4i-a10-hackberry.dtb \

arch/arm/boot/dts/sun4i-a10-a1000.dts

+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+
+/ {
+	model = "Mele A1000";
+	compatible = "mele,a1000", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			phy-supply = <&reg_emac_3v3>;
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		pinctrl@01c20800 {
+			emac_power_pin_a1000: emac_power_pin@0 {
+				allwinner,pins = "PH15";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			led_pins_a1000: led_pins@0 {
+				allwinner,pins = "PH10", "PH20";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_a1000>;
+
+		red {
+			label = "a1000:red:usr";
+			gpios = <&pio 7 10 0>;
+		};
+
+		blue {
+			label = "a1000:blue:usr";
+			gpios = <&pio 7 20 0>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_emac_3v3: emac-3v3 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_power_pin_a1000>;
+			regulator-name = "emac-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&pio 7 15 0>;
+		};
+	};
+};

arch/arm/boot/dts/sun4i-a10-cubieboard.dts

@@ -26,7 +26,7 @@ chosen {
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		emac: ethernet@01c0b000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&emac_pins_a>;
@@ -76,12 +76,12 @@ leds {
 		pinctrl-0 = <&led_pins_cubieboard>;
 
 		blue {
-			label = "cubieboard::blue";
+			label = "cubieboard:blue:usr";
 			gpios = <&pio 7 21 0>; /* LED1 */
 		};
 
 		green {
-			label = "cubieboard::green";
+			label = "cubieboard:green:usr";
 			gpios = <&pio 7 20 0>; /* LED2 */
 			linux,default-trigger = "heartbeat";
 		};

arch/arm/boot/dts/sun4i-a10-hackberry.dts

@@ -22,7 +22,7 @@ chosen {
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		emac: ethernet@01c0b000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&emac_pins_a>;

arch/arm/boot/dts/sun4i-a10-mini-xplus.dts

@@ -22,7 +22,7 @@ chosen {
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		uart0: serial@01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -160,11 +160,10 @@ apb1_gates: apb1_gates@01c2006c {
 		};
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		reg = <0x01c20000 0x300000>;
 		ranges;
 
 		emac: ethernet@01c0b000 {

arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts

@@ -18,7 +18,7 @@ / {
 	model = "Olimex A10s-Olinuxino Micro";
 	compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
 
-	soc@01c20000 {
+	soc@01c00000 {
 		emac: ethernet@01c0b000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&emac_pins_a>;
@@ -60,6 +60,31 @@ uart3: serial@01c28c00 {
 			pinctrl-0 = <&uart3_pins_a>;
 			status = "okay";
 		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+
+			at24@50 {
+				compatible = "at,24c16";
+				pagesize = <16>;
+				reg = <0x50>;
+				read-only;
+			};
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
 	};
 
 	leds {

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -157,11 +157,10 @@ apb1_gates: apb1_gates@01c2006c {
 		};
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		reg = <0x01c20000 0x300000>;
 		ranges;
 
 		emac: ethernet@01c0b000 {
@@ -229,6 +228,27 @@ emac_pins_a: emac0@0 {
 				allwinner,drive = <0>;
 				allwinner,pull = <0>;
 			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB15", "PB16";
+				allwinner,function = "i2c1";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB17", "PB18";
+				allwinner,function = "i2c2";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
 		};
 
 		timer@01c20c00 {
@@ -282,5 +302,38 @@ uart3: serial@01c28c00 {
 			clocks = <&apb1_gates 19>;
 			status = "disabled";
 		};
+
+		i2c0: i2c@01c2ac00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&apb1_gates 0>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@01c2b000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&apb1_gates 1>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@01c2b400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&apb1_gates 2>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
 	};
 };

arch/arm/boot/dts/sun5i-a13-olinuxino.dts

@@ -22,7 +22,7 @@ chosen {
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		pinctrl@01c20800 {
 			led_pins_olinuxino: led_pins@0 {
 				allwinner,pins = "PG9";

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -150,11 +150,10 @@ apb1_gates: apb1_gates@01c2006c {
 		};
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		reg = <0x01c20000 0x300000>;
 		ranges;
 
 		intc: interrupt-controller@01c20400 {