arm64: dts: rockchip: add vcc_mipi regulator to rock-3a

The Radxa ROCK3 Model A features a voltage regulator that provides
a 3V3 supply to the MIPI DSI connector. Add this regulator to the
device tree of the board.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220712133204.2524942-2-michael.riesch@wolfvision.netSigned-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts

@@ -147,6 +147,22 @@ regulator-state-mem {
 			regulator-off-in-suspend;
 		};
 	};
+
+	vcc_mipi: vcc-mipi {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_mipi_en>;
+		regulator-name = "vcc_mipi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
 };
 
 &combphy0 {
@@ -484,6 +500,12 @@ vcc_cam_en: vcc_cam_en {
 		};
 	};
 
+	display {
+		vcc_mipi_en: vcc_mipi_en {
+			rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	ethernet {
 		eth_phy_rst: eth_phy_rst {
 			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;