Commit 7a4a207e authored by Michael Hennerich's avatar Michael Hennerich Committed by Mike Frysinger

Blackfin: BF51x/BF52x: support GPIO Hysteresis/Schmitt Trigger options

Newer parts have optional Hysteresis/Schmitt Trigger options to help with
dirty signals.  So add some kconfig options for tuning this and enable it
by default for people.
Signed-off-by: default avatarMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent 812ae98f
......@@ -864,6 +864,13 @@ void __init setup_arch(char **cmdline_p)
bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL);
bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL);
#endif
#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL
bfin_write_PORTF_HYSTERISIS(HYST_PORTF_0_15);
bfin_write_PORTG_HYSTERISIS(HYST_PORTG_0_15);
bfin_write_PORTH_HYSTERISIS(HYST_PORTH_0_15);
bfin_write_MISCPORT_HYSTERISIS((bfin_read_MISCPORT_HYSTERISIS() &
~HYST_NONEGPIO_MASK) | HYST_NONEGPIO);
#endif
cclk = get_cclk();
sclk = get_sclk();
......
......@@ -62,6 +62,67 @@ config BF518_UART1_PORTG
PORT G
endchoice
comment "Hysteresis/Schmitt Trigger Control"
config BFIN_HYSTERESIS_CONTROL
bool "Enable Hysteresis Control"
help
The ADSP-BF51x allows to control input hysteresis for Port F,
Port G and Port H and other processor signal inputs.
The Schmitt trigger enables can be set only for pin groups.
Saying Y will overwrite the default reset or boot loader
initialization.
menu "PORT F"
depends on BFIN_HYSTERESIS_CONTROL
config GPIO_HYST_PORTF_0_7
bool "Enable Hysteresis on PORTF {0...7}"
config GPIO_HYST_PORTF_8_9
bool "Enable Hysteresis on PORTF {8, 9}"
config GPIO_HYST_PORTF_10
bool "Enable Hysteresis on PORTF 10"
config GPIO_HYST_PORTF_11
bool "Enable Hysteresis on PORTF 11"
config GPIO_HYST_PORTF_12_13
bool "Enable Hysteresis on PORTF {12, 13}"
config GPIO_HYST_PORTF_14_15
bool "Enable Hysteresis on PORTF {14, 15}"
endmenu
menu "PORT G"
depends on BFIN_HYSTERESIS_CONTROL
config GPIO_HYST_PORTG_0
bool "Enable Hysteresis on PORTG 0"
config GPIO_HYST_PORTG_1_4
bool "Enable Hysteresis on PORTG {1...4}"
config GPIO_HYST_PORTG_5_6
bool "Enable Hysteresis on PORTG {5, 6}"
config GPIO_HYST_PORTG_7_8
bool "Enable Hysteresis on PORTG {7, 8}"
config GPIO_HYST_PORTG_9
bool "Enable Hysteresis on PORTG 9"
config GPIO_HYST_PORTG_10
bool "Enable Hysteresis on PORTG 10"
config GPIO_HYST_PORTG_11_13
bool "Enable Hysteresis on PORTG {11...13}"
config GPIO_HYST_PORTG_14_15
bool "Enable Hysteresis on PORTG {14, 15}"
endmenu
menu "PORT H"
depends on BFIN_HYSTERESIS_CONTROL
config GPIO_HYST_PORTH_0_7
bool "Enable Hysteresis on PORTH {0...7}"
endmenu
menu "None-GPIO"
depends on BFIN_HYSTERESIS_CONTROL
config NONEGPIO_HYST_NMI_RST_BMODE
bool "Enable Hysteresis on {NMI, RESET, BMODE}"
config NONEGPIO_HYST_JTAG
bool "Enable Hysteresis on JTAG"
endmenu
comment "Interrupt Priority Assignment"
menu "Priority"
......
......@@ -85,6 +85,111 @@
#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO)
/**************************** Hysteresis Settings ****************************/
#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL
#ifdef CONFIG_GPIO_HYST_PORTF_0_7
#define HYST_PORTF_0_7 (1 << 0)
#else
#define HYST_PORTF_0_7 (0 << 0)
#endif
#ifdef CONFIG_GPIO_HYST_PORTF_8_9
#define HYST_PORTF_8_9 (1 << 2)
#else
#define HYST_PORTF_8_9 (0 << 2)
#endif
#ifdef CONFIG_GPIO_HYST_PORTF_10
#define HYST_PORTF_10 (1 << 4)
#else
#define HYST_PORTF_10 (0 << 4)
#endif
#ifdef CONFIG_GPIO_HYST_PORTF_11
#define HYST_PORTF_11 (1 << 6)
#else
#define HYST_PORTF_11 (0 << 6)
#endif
#ifdef CONFIG_GPIO_HYST_PORTF_12_13
#define HYST_PORTF_12_13 (1 << 8)
#else
#define HYST_PORTF_12_13 (0 << 8)
#endif
#ifdef CONFIG_GPIO_HYST_PORTF_14_15
#define HYST_PORTF_14_15 (1 << 10)
#else
#define HYST_PORTF_14_15 (0 << 10)
#endif
#define HYST_PORTF_0_15 (HYST_PORTF_0_7 | HYST_PORTF_8_9 | HYST_PORTF_10 | \
HYST_PORTF_11 | HYST_PORTF_12_13 | HYST_PORTF_14_15)
#ifdef CONFIG_GPIO_HYST_PORTG_0
#define HYST_PORTG_0 (1 << 0)
#else
#define HYST_PORTG_0 (0 << 0)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_1_4
#define HYST_PORTG_1_4 (1 << 2)
#else
#define HYST_PORTG_1_4 (0 << 2)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_5_6
#define HYST_PORTG_5_6 (1 << 4)
#else
#define HYST_PORTG_5_6 (0 << 4)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_7_8
#define HYST_PORTG_7_8 (1 << 6)
#else
#define HYST_PORTG_7_8 (0 << 6)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_9
#define HYST_PORTG_9 (1 << 8)
#else
#define HYST_PORTG_9 (0 << 8)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_10
#define HYST_PORTG_10 (1 << 10)
#else
#define HYST_PORTG_10 (0 << 10)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_11_13
#define HYST_PORTG_11_13 (1 << 12)
#else
#define HYST_PORTG_11_13 (0 << 12)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_14_15
#define HYST_PORTG_14_15 (1 << 14)
#else
#define HYST_PORTG_14_15 (0 << 14)
#endif
#define HYST_PORTG_0_15 (HYST_PORTG_0 | HYST_PORTG_1_4 | HYST_PORTG_5_6 | \
HYST_PORTG_7_8 | HYST_PORTG_9 | HYST_PORTG_10 | \
HYST_PORTG_11_13 | HYST_PORTG_14_15)
#ifdef CONFIG_GPIO_HYST_PORTH_0_7
#define HYST_PORTH_0_7 (1 << 0)
#else
#define HYST_PORTH_0_7 (0 << 0)
#endif
#define HYST_PORTH_0_15 (HYST_PORTH_0_7)
#ifdef CONFIG_NONEGPIO_HYST_NMI_RST_BMODE
#define HYST_NMI_RST_BMODE (1 << 2)
#else
#define HYST_NMI_RST_BMODE (0 << 2)
#endif
#ifdef CONFIG_NONEGPIO_HYST_JTAG
#define HYST_JTAG (1 << 4)
#else
#define HYST_JTAG (0 << 4)
#endif
#define HYST_NONEGPIO (HYST_NMI_RST_BMODE | HYST_JTAG)
#define HYST_NONEGPIO_MASK (0x3C)
#endif /* CONFIG_BFIN_HYSTERESIS_CONTROL */
#ifdef CONFIG_BF518
#define CPU "BF518"
#define CPUID 0x27e8
......
......@@ -79,6 +79,72 @@ config BF527_NAND_D_PORTH
PORT H
endchoice
comment "Hysteresis/Schmitt Trigger Control"
config BFIN_HYSTERESIS_CONTROL
bool "Enable Hysteresis Control"
help
The ADSP-BF52x allows to control input hysteresis for Port F,
Port G and Port H and other processor signal inputs.
The Schmitt trigger enables can be set only for pin groups.
Saying Y will overwrite the default reset or boot loader
initialization.
menu "PORT F"
depends on BFIN_HYSTERESIS_CONTROL
config GPIO_HYST_PORTF_0_7
bool "Enable Hysteresis on PORTF {0...7}"
config GPIO_HYST_PORTF_8_9
bool "Enable Hysteresis on PORTF {8, 9}"
config GPIO_HYST_PORTF_10
bool "Enable Hysteresis on PORTF 10"
config GPIO_HYST_PORTF_11
bool "Enable Hysteresis on PORTF 11"
config GPIO_HYST_PORTF_12_13
bool "Enable Hysteresis on PORTF {12, 13}"
config GPIO_HYST_PORTF_14_15
bool "Enable Hysteresis on PORTF {14, 15}"
endmenu
menu "PORT G"
depends on BFIN_HYSTERESIS_CONTROL
config GPIO_HYST_PORTG_0
bool "Enable Hysteresis on PORTG 0"
config GPIO_HYST_PORTG_1_4
bool "Enable Hysteresis on PORTG {1...4}"
config GPIO_HYST_PORTG_5_6
bool "Enable Hysteresis on PORTG {5, 6}"
config GPIO_HYST_PORTG_7_8
bool "Enable Hysteresis on PORTG {7, 8}"
config GPIO_HYST_PORTG_9
bool "Enable Hysteresis on PORTG 9"
config GPIO_HYST_PORTG_10
bool "Enable Hysteresis on PORTG 10"
config GPIO_HYST_PORTG_11_13
bool "Enable Hysteresis on PORTG {11...13}"
config GPIO_HYST_PORTG_14_15
bool "Enable Hysteresis on PORTG {14, 15}"
endmenu
menu "PORT H"
depends on BFIN_HYSTERESIS_CONTROL
config GPIO_HYST_PORTH_0_7
bool "Enable Hysteresis on PORTH {0...7}"
config GPIO_HYST_PORTH_8
bool "Enable Hysteresis on PORTH 8"
config GPIO_HYST_PORTH_9_15
bool "Enable Hysteresis on PORTH {9...15}"
endmenu
menu "None-GPIO"
depends on BFIN_HYSTERESIS_CONTROL
config NONEGPIO_HYST_TMR0_FS1_PPICLK
bool "Enable Hysteresis on {TMR0, PPI_FS1, PPI_CLK}"
config NONEGPIO_HYST_NMI_RST_BMODE
bool "Enable Hysteresis on {NMI, RESET, BMODE}"
config NONEGPIO_HYST_JTAG
bool "Enable Hysteresis on JTAG"
endmenu
comment "Interrupt Priority Assignment"
menu "Priority"
......
......@@ -85,6 +85,126 @@
#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO)
/**************************** Hysteresis Settings ****************************/
#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL
#ifdef CONFIG_GPIO_HYST_PORTF_0_7
#define HYST_PORTF_0_7 (1 << 0)
#else
#define HYST_PORTF_0_7 (0 << 0)
#endif
#ifdef CONFIG_GPIO_HYST_PORTF_8_9
#define HYST_PORTF_8_9 (1 << 2)
#else
#define HYST_PORTF_8_9 (0 << 2)
#endif
#ifdef CONFIG_GPIO_HYST_PORTF_10
#define HYST_PORTF_10 (1 << 4)
#else
#define HYST_PORTF_10 (0 << 4)
#endif
#ifdef CONFIG_GPIO_HYST_PORTF_11
#define HYST_PORTF_11 (1 << 6)
#else
#define HYST_PORTF_11 (0 << 6)
#endif
#ifdef CONFIG_GPIO_HYST_PORTF_12_13
#define HYST_PORTF_12_13 (1 << 8)
#else
#define HYST_PORTF_12_13 (0 << 8)
#endif
#ifdef CONFIG_GPIO_HYST_PORTF_14_15
#define HYST_PORTF_14_15 (1 << 10)
#else
#define HYST_PORTF_14_15 (0 << 10)
#endif
#define HYST_PORTF_0_15 (HYST_PORTF_0_7 | HYST_PORTF_8_9 | HYST_PORTF_10 | \
HYST_PORTF_11 | HYST_PORTF_12_13 | HYST_PORTF_14_15)
#ifdef CONFIG_GPIO_HYST_PORTG_0
#define HYST_PORTG_0 (1 << 0)
#else
#define HYST_PORTG_0 (0 << 0)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_1_4
#define HYST_PORTG_1_4 (1 << 2)
#else
#define HYST_PORTG_1_4 (0 << 2)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_5_6
#define HYST_PORTG_5_6 (1 << 4)
#else
#define HYST_PORTG_5_6 (0 << 4)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_7_8
#define HYST_PORTG_7_8 (1 << 6)
#else
#define HYST_PORTG_7_8 (0 << 6)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_9
#define HYST_PORTG_9 (1 << 8)
#else
#define HYST_PORTG_9 (0 << 8)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_10
#define HYST_PORTG_10 (1 << 10)
#else
#define HYST_PORTG_10 (0 << 10)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_11_13
#define HYST_PORTG_11_13 (1 << 12)
#else
#define HYST_PORTG_11_13 (0 << 12)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_14_15
#define HYST_PORTG_14_15 (1 << 14)
#else
#define HYST_PORTG_14_15 (0 << 14)
#endif
#define HYST_PORTG_0_15 (HYST_PORTG_0 | HYST_PORTG_1_4 | HYST_PORTG_5_6 | \
HYST_PORTG_7_8 | HYST_PORTG_9 | HYST_PORTG_10 | \
HYST_PORTG_11_13 | HYST_PORTG_14_15)
#ifdef CONFIG_GPIO_HYST_PORTH_0_7
#define HYST_PORTH_0_7 (1 << 0)
#else
#define HYST_PORTH_0_7 (0 << 0)
#endif
#ifdef CONFIG_GPIO_HYST_PORTH_8
#define HYST_PORTH_8 (1 << 2)
#else
#define HYST_PORTH_8 (0 << 2)
#endif
#ifdef CONFIG_GPIO_HYST_PORTH_9_15
#define HYST_PORTH_9_15 (1 << 4)
#else
#define HYST_PORTH_9_15 (0 << 4)
#endif
#define HYST_PORTH_0_15 (HYST_PORTH_0_7 | HYST_PORTH_8 | HYST_PORTH_9_15)
#ifdef CONFIG_NONEGPIO_HYST_TMR0_FS1_PPICLK
#define HYST_TMR0_FS1_PPICLK (1 << 0)
#else
#define HYST_TMR0_FS1_PPICLK (0 << 0)
#endif
#ifdef CONFIG_NONEGPIO_HYST_NMI_RST_BMODE
#define HYST_NMI_RST_BMODE (1 << 2)
#else
#define HYST_NMI_RST_BMODE (0 << 2)
#endif
#ifdef CONFIG_NONEGPIO_HYST_JTAG
#define HYST_JTAG (1 << 4)
#else
#define HYST_JTAG (0 << 4)
#endif
#define HYST_NONEGPIO (HYST_TMR0_FS1_PPICLK | HYST_NMI_RST_BMODE | HYST_JTAG)
#define HYST_NONEGPIO_MASK (0x3F)
#endif /* CONFIG_BFIN_HYSTERESIS_CONTROL */
#ifdef CONFIG_BF527
#define CPU "BF527"
#define CPUID 0x27e0
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment