arm64: dts: ti: am62-phyboard-lyra: Add overlay to increase cpu frequency to 1.4 GHz

The am625 is capable of running at 1.4 GHz when VDD_CORE is increased
from 0.75V to 0.85V. Increasing the voltage while the AM625 is
running has not been validated by TI, so we provide an overlay so that
people may choose to run at 1.4 GHz if they need the additional
performance.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Link: https://lore.kernel.org/r/20240425221925.1781226-1-nmorrisson@phytec.comSigned-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arch/arm64/boot/dts/ti/Makefile

@@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-1-4-ghz-opp.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am62x-phyboard-lyra-gpio-fan.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
 
@@ -110,6 +111,8 @@ k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \
 	k3-am625-beagleplay-csi2-ov5640.dtbo
 k3-am625-beagleplay-csi2-tevi-ov5640-dtbs := k3-am625-beagleplay.dtb \
 	k3-am625-beagleplay-csi2-tevi-ov5640.dtbo
+k3-am625-phyboard-lyra-1-4-ghz-opp.dtbs := k3-am625-phyboard-lyra-rdk.dtb \
+	k3-am625-phyboard-lyra-1-4-ghz-opp.dtbo
 k3-am625-phyboard-lyra-gpio-fan-dtbs := k3-am625-phyboard-lyra-rdk.dtb \
 	k3-am62x-phyboard-lyra-gpio-fan.dtbo
 k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \

arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso

+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2024 PHYTEC America LLC
+ * Author: Nathan Morrisson <nmorrisson@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&vdd_core {
+	regulator-min-microvolt = <850000>;
+	regulator-max-microvolt = <850000>;
+};
+
+&a53_opp_table {
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-supported-hw = <0x01 0x0004>;
+	};
+};