Commit 7a8ff7d9 authored by Quinn Tran's avatar Quinn Tran Committed by Martin K. Petersen

scsi: qla2xxx: Fix NVMe session down detection

When Target port transitions personality from one to another (NVMe <-->
FCP), there could be some overlap of the two where one layer is going down
while the other layer is coming up. This overlap can cause temporary I/O
error. Detect those errors/transitions and recover from them. Triggers
session tear down and allow relogin to re-drive the connection under the
following conditions:

 - NVMe command error

 - On PRLO + N2N (rida format 2)

Link: https://lore.kernel.org/r/20210817051315.2477-11-njavali@marvell.comSigned-off-by: default avatarQuinn Tran <qutran@marvell.com>
Signed-off-by: default avatarNilesh Javali <njavali@marvell.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent f8844457
......@@ -2733,12 +2733,14 @@ qla2x00_terminate_rport_io(struct fc_rport *rport)
* final cleanup of firmware resources (PCBs and XCBs).
*/
if (fcport->loop_id != FC_NO_LOOP_ID) {
if (IS_FWI2_CAPABLE(fcport->vha->hw))
fcport->vha->hw->isp_ops->fabric_logout(fcport->vha,
fcport->loop_id, fcport->d_id.b.domain,
fcport->d_id.b.area, fcport->d_id.b.al_pa);
else
if (IS_FWI2_CAPABLE(fcport->vha->hw)) {
if (fcport->loop_id != FC_NO_LOOP_ID)
fcport->logout_on_delete = 1;
qlt_schedule_sess_for_deletion(fcport);
} else {
qla2x00_port_logout(fcport->vha, fcport);
}
}
}
......
......@@ -2652,6 +2652,15 @@ static void qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
case CS_PORT_UNAVAILABLE:
case CS_PORT_LOGGED_OUT:
fcport->nvme_flag |= NVME_FLAG_RESETTING;
if (atomic_read(&fcport->state) == FCS_ONLINE) {
ql_dbg(ql_dbg_disc, fcport->vha, 0x3021,
"Port to be marked lost on fcport=%06x, current "
"port state= %s comp_status %x.\n",
fcport->d_id.b24, port_state_str[FCS_ONLINE],
comp_status);
qlt_schedule_sess_for_deletion(fcport);
}
fallthrough;
case CS_ABORTED:
case CS_PORT_BUSY:
......
......@@ -4190,6 +4190,16 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
rptid_entry->u.f2.remote_nport_id[1];
fcport->d_id.b.al_pa =
rptid_entry->u.f2.remote_nport_id[0];
/*
* For the case where remote port sending PRLO, FW
* sends up RIDA Format 2 as an indication of session
* loss. In other word, FW state change from PRLI
* complete back to PLOGI complete. Delete the
* session and let relogin drive the reconnect.
*/
if (atomic_read(&fcport->state) == FCS_ONLINE)
qlt_schedule_sess_for_deletion(fcport);
}
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment