usb: dwc3: Add a function to check properties

Add a function to check properties and call it from probe. This will
allow us to add check code without bloating the probe function. This
needs to be done after dwc3_get_properties() and dwc3_core_init() so
that all the properties and hardware configs are available.
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

drivers/usb/dwc3/core.c

@@ -1019,6 +1019,38 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 
 }
 
+static void dwc3_check_params(struct dwc3 *dwc)
+{
+	struct device *dev = dwc->dev;
+
+	/* Check the maximum_speed parameter */
+	switch (dwc->maximum_speed) {
+	case USB_SPEED_LOW:
+	case USB_SPEED_FULL:
+	case USB_SPEED_HIGH:
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+		break;
+	default:
+		dev_err(dev, "invalid maximum_speed parameter %d\n",
+			dwc->maximum_speed);
+		/* fall through */
+	case USB_SPEED_UNKNOWN:
+		/* default to superspeed */
+		dwc->maximum_speed = USB_SPEED_SUPER;
+
+		/*
+		 * default to superspeed plus if we are capable.
+		 */
+		if (dwc3_is_usb31(dwc) &&
+		    (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
+		     DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
+			dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
+
+		break;
+	}
+}
+
 static int dwc3_probe(struct platform_device *pdev)
 {
 	struct device		*dev = &pdev->dev;
@@ -1110,32 +1142,7 @@ static int dwc3_probe(struct platform_device *pdev)
 		goto err4;
 	}
 
-	/* Check the maximum_speed parameter */
-	switch (dwc->maximum_speed) {
-	case USB_SPEED_LOW:
-	case USB_SPEED_FULL:
-	case USB_SPEED_HIGH:
-	case USB_SPEED_SUPER:
-	case USB_SPEED_SUPER_PLUS:
-		break;
-	default:
-		dev_err(dev, "invalid maximum_speed parameter %d\n",
-			dwc->maximum_speed);
-		/* fall through */
-	case USB_SPEED_UNKNOWN:
-		/* default to superspeed */
-		dwc->maximum_speed = USB_SPEED_SUPER;
-
-		/*
-		 * default to superspeed plus if we are capable.
-		 */
-		if (dwc3_is_usb31(dwc) &&
-		    (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
-		     DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
-			dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
-
-		break;
-	}
+	dwc3_check_params(dwc);
 
 	ret = dwc3_core_init_mode(dwc);
 	if (ret)