Commit 7ae92ae5 authored by Eric Dumazet's avatar Eric Dumazet Committed by David S. Miller

mlx5: add busy polling support

It is now easy to add busy polling support to a NAPI driver,
with very little impact on normal input path.

This patch serves as a reference implementation.

Note:

A followup patch will add proper napi_complete_done() in mlx5,
so that LINUX_MIB_BUSYPOLLRXPACKETS snmp counter is properly handled.

Tested:

Normal TCP_RR results without busy polling :

lpk51:~# echo 0 >/proc/sys/net/core/busy_read
lpk52:~# echo 0 >/proc/sys/net/core/busy_read

lpk51:~# ./netperf -H 192.168.4.52 -t TCP_RR -l 10
MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.4.52 () port 0 AF_INET : first burst 0
Local /Remote
Socket Size   Request  Resp.   Elapsed  Trans.
Send   Recv   Size     Size    Time     Rate
bytes  Bytes  bytes    bytes   secs.    per sec

16384  87380  1        1       10.00    53509.49
16384  87380

Now enable busy polling :

lpk51:~# echo 70 >/proc/sys/net/core/busy_read
lpk52:~# echo 70 >/proc/sys/net/core/busy_read

lpk51:~# ./netperf -H 192.168.4.52 -t TCP_RR -l 10
MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.4.52 () port 0 AF_INET : first burst 0
Local /Remote
Socket Size   Request  Resp.   Elapsed  Trans.
Send   Recv   Size     Size    Time     Rate
bytes  Bytes  bytes    bytes   secs.    per sec

16384  87380  1        1       10.00    97530.92
16384  87380
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ce6aea93
......@@ -982,6 +982,7 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix,
mlx5e_build_channeltc_to_txq_map(priv, ix);
netif_napi_add(netdev, &c->napi, mlx5e_napi_poll, 64);
napi_hash_add(&c->napi);
err = mlx5e_open_tx_cqs(c, cparam);
if (err)
......@@ -1020,6 +1021,7 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix,
err_napi_del:
netif_napi_del(&c->napi);
napi_hash_del(&c->napi);
kfree(c);
return err;
......@@ -1033,6 +1035,10 @@ static void mlx5e_close_channel(struct mlx5e_channel *c)
mlx5e_close_cq(&c->rq.cq);
mlx5e_close_tx_cqs(c);
netif_napi_del(&c->napi);
napi_hash_del(&c->napi);
synchronize_rcu();
kfree(c);
}
......
......@@ -33,6 +33,7 @@
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <linux/tcp.h>
#include <net/busy_poll.h>
#include "en.h"
static inline int mlx5e_alloc_rx_wqe(struct mlx5e_rq *rq,
......@@ -242,6 +243,7 @@ bool mlx5e_poll_rx_cq(struct mlx5e_cq *cq, int budget)
wqe = mlx5_wq_ll_get_wqe(&rq->wq, wqe_counter);
skb = rq->skb[wqe_counter];
prefetch(skb->data);
skb_mark_napi_id(skb, cq->napi);
rq->skb[wqe_counter] = NULL;
dma_unmap_single(rq->pdev,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment