drm/i915/icl: Add VIDEO_DIP registers

The Picture Parameter Set metadata for DSC has to be sent
to the panel through secondary data packets. Add the error
correction registers, data registers and control registers
for the same.

The control registers for  transcoders A and B are already
defined and will be reused for Icelake purpose. This patch adds
Control register for EDP and transcoder C apart from adding the
PPS data and error registers.

v2: reuse MMIO_TRANS2 for _PPS_DATA and _PPS_ECC.
The  _MMIO_TRANS2(pipe, reg) macro definition takes care of the eDp case

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-1-git-send-email-anusha.srivatsa@intel.com

drivers/gpu/drm/i915/i915_reg.h

@@ -4605,6 +4605,16 @@ enum {
 #define   VIDEO_DIP_ENABLE_GMP_HSW	(1 << 4)
 #define   VIDEO_DIP_ENABLE_SPD_HSW	(1 << 0)
 
+#define  DRM_DIP_ENABLE			(1 << 28)
+#define  PSR_VSC_BIT_7_SET		(1 << 27)
+#define  VSC_SELECT_MASK		(0x3 << 26)
+#define  VSC_SELECT_SHIFT		26
+#define  VSC_DIP_HW_HEA_DATA		(0 << 26)
+#define  VSC_DIP_HW_HEA_SW_DATA		(1 << 26)
+#define  VSC_DIP_HW_DATA_SW_HEA		(2 << 26)
+#define  VSC_DIP_SW_HEA_DATA		(3 << 26)
+#define  VDIP_ENABLE_PPS		(1 << 24)
+
 /* Panel power sequencing */
 #define PPS_BASE			0x61200
 #define VLV_PPS_BASE			(VLV_DISPLAY_BASE + PPS_BASE)
@@ -7843,12 +7853,25 @@ enum {
 #define _HSW_VIDEO_DIP_VSC_ECC_B	0x61344
 #define _HSW_VIDEO_DIP_GCP_B		0x61210
 
+/* Icelake PPS_DATA and _ECC DIP Registers.
+ * These are available for transcoders B,C and eDP.
+ * Adding the _A so as to reuse the _MMIO_TRANS2
+ * definition, with which it offsets to the right location.
+ */
+
+#define _ICL_VIDEO_DIP_PPS_DATA_A	0x60350
+#define _ICL_VIDEO_DIP_PPS_DATA_B	0x61350
+#define _ICL_VIDEO_DIP_PPS_ECC_A	0x603D4
+#define _ICL_VIDEO_DIP_PPS_ECC_B	0x613D4
+
 #define HSW_TVIDEO_DIP_CTL(trans)		_MMIO_TRANS2(trans, _HSW_VIDEO_DIP_CTL_A)
 #define HSW_TVIDEO_DIP_AVI_DATA(trans, i)	_MMIO_TRANS2(trans, _HSW_VIDEO_DIP_AVI_DATA_A + (i) * 4)
 #define HSW_TVIDEO_DIP_VS_DATA(trans, i)	_MMIO_TRANS2(trans, _HSW_VIDEO_DIP_VS_DATA_A + (i) * 4)
 #define HSW_TVIDEO_DIP_SPD_DATA(trans, i)	_MMIO_TRANS2(trans, _HSW_VIDEO_DIP_SPD_DATA_A + (i) * 4)
 #define HSW_TVIDEO_DIP_GCP(trans)		_MMIO_TRANS2(trans, _HSW_VIDEO_DIP_GCP_A)
 #define HSW_TVIDEO_DIP_VSC_DATA(trans, i)	_MMIO_TRANS2(trans, _HSW_VIDEO_DIP_VSC_DATA_A + (i) * 4)
+#define ICL_VIDEO_DIP_PPS_DATA(trans, i)	_MMIO_TRANS2(trans, _ICL_VIDEO_DIP_PPS_DATA_A + (i) * 4)
+#define ICL_VIDEO_DIP_PPS_ECC(trans, i)		_MMIO_TRANS2(trans, _ICL_VIDEO_DIP_PPS_ECC_A + (i) * 4)
 
 #define _HSW_STEREO_3D_CTL_A		0x70020
 #define   S3D_ENABLE			(1 << 31)